Top 6 Best 10an

Hose ID 916. Hose OD 0.783inch.Length 10feet.. Made of CPE synthetic rubber and nylon braided.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 10an nylon braided fuel line.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.Professional installation is highly recommended..

The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed. Package 2PCS. 10AN swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose.. These new full flow swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place.. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling.. EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

ID 12. OD 0.68inch.Length 16 feet. Please measure before purchase Includes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Max working pressure 2000psi. Bursting pressure 6000psi.AN10 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.. Applicable Medium10AN e85 fuel line works with all automotive fuels, lubricants, and coolants.. -10 ptfe nylon braided fuel line relatively hard,it can't be bend and folding in half. Professional installation is highly recommended.. EVIL ENERGY provide 10an PTFE fuel hose fitting kit 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

IncludesThe 10AN nylon and stainless steel braided CPE fuel line kit includes 10pcs 10an CPE hose ends 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 58 CPE braided fuel line Length20ft6M. MaterialsThe 10AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85.. LifetimeThe 10AN CPE hose working temperature range -40 to 257 -40 to 125. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi.. CPE HoseThe 10an CPE hose fitting is reused, just replaced a new oliveferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube.. WarrantyThree months limited warranty Free lifetime technical support..

-10 AN to dual -10 AN Y fitting is made of aluminum alloy 6061-T6,and hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.It is suitable for fuel system components such as fuel hose line fitting, fuel pump, fuel filter, etc.. The thread size of the 3-way union Y block splitter is 78UNF.They are sealed by a 37 degree angle, which is easy to install and avoid leakage.Ideal for any liquid or gas application requiring a high flow separator.. Compared with the T fittings with 90 degrees, male flare thread Y connector split flow at 60 angles can presant less flow obstructionBesides,it is also saves more space.. All three ends have a male AN fittingthe block can flow both ways.. EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

CORROSION AND ABRASION RESISTANCEThis rubber line is made of high-quality nylon-reinforced CPE chlorinated polyethylene synthetic rubber on the inside provides constant flow during operation of the racing engine, along with woven stainless steel in the middle layer which achieves the desired flexibility and mechanical bond between the braiding layers. Full coverage outer braid of nylon, which is lightweight, yet extremely durable provides maximum corrosion and abrasion resistance.. MATCH WELL AND LEAKAGE FREE SEALWe provide a complete set, including 16.4 Ft fuel line and 10 pieces T6061 aluminum hose connector. Because they are all made in the same factory, there is no difference between tube and ends size, they can be matched well. This is an assembly, we provide a detailed instruction manual in the package to help you install it easily, but you must keep in mind that professional installation is highly required. Dont hesitate anymore, add to your cart now. POWERFUL COMPATIBILITY AND WIDELY USEDAN10 fuel line repair kit will fit most standard 58 inch tube stub in any fuel system. Works great as transmission line from your hard fuel line to fuel pump or from pump up to the fuel filter or carburetor. Compatible with most automotive replacement parts that fuels, coolants, and oils need be delivered, such as fuel pump, fuel filter, fuel tank, oil filter, oil sandwich adapter, turbo oil return and so on But please note Not for E85. MEET YOUR NEED, TIME AND MONEY SAVINGThis kit consists of 16.4 feet transfer hose and 10 swivel hose fittings. You want to use it as a replacement kit, that's a decent deal. This tube is long enough and can be cut to any size needed, and hose connectors have 4 different angles, you can choose the right hose end for your project. When you complete your project, it can keep your engine bay tidy. All connectors are made of T6061 aluminum can be reused with high strength and good durability.. RESPONSIBLE CUSTOMER SERVICEProfessional installation is highly recommended and use Adjustable AN Wrench will much better.SYKRSS is the responsible brand, always provide high-quality products and best service, and hope our users can get good shopping experiences..

Features10AN fuel line hose kit Black braided nylon fuel hose has a full black nylon fiber braided jacket and chlorinated polyethylene CPE synthetic rubber inner line.. Application10AN nylon braided hose kit can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel. Please note that the service life may be shortened when using fuel. Not suitable for E85. This kind of braided 10AN hose can be used for brake system, fuel pump, fuel filter, oil return, oil return system, turbo cooler system, transmission system, oil cooler kit, etc.. Safety FeaturesThe 10AN CPE hose working temperature range -100 to 500 -73 to 260. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi.. Package IncludesThe 10AN fuel line hose kit includes 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 58 CPE braided fuel line Length20ft6M. WarrantyProfessional installation is highly recommended. Recommended to use Adjustable AN Wrench. We offers 3 months limited warranty Free lifetime technical support..

sizethe thread size of 10AN is 78-14 UNF,the thread size of 10AN ORB is 78-14 UNF. SealingThe AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring.. Material The 10AN to 10AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.Temperature Range -40F to 212F.Maximum working pressure 4000PSI. The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc.. EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

ApplicationIt can be connected to the engine gearbox oil cooler, engine and air filtration system, engine and cooling system, can be used for circulating oilfuelwaterfluid, etc.. MaterialThe femalemale swivel fittings are made of lightweight aluminum alloy 6061-T6 material Max Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. Size Female to Male Swivel Fitting, female AN10 to male AN10 78-14 UNF thread pipe connectors, 90 degree elbow flare union.. Easy to assembly It is easy to assembled without special equipment or welded construction, having better fluid flow performance and integrity than ordinary welded-Fitting.. Rest assured to buy Please feel free to contact us if any trouble you meet, We will provide you with the best solution in time and effectively..

Package Included 2 pcs x 10AN to 10AN Male Flare Coupling Union Adapter. Thread size of 10AN male coupler is 78-14 UNF, can use to splice or extend a line, works with female thread fitting.. Black 6061-T6 aluminum 10AN flare union work temperature -65 to 252 degree F, max pressure 1000 psi, ultimate torque 50N.. Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system.. Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..