Top 6 Best 1/2 Fuel Line

Nitrile tube that is spiral reinforced for enhanced durability. NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Vacuum rating of 24 inHg for sizes less than 12 in I.D., and 10 inHg for sizes 12 in to 34 in I.D. at ambient temperatures. Warning Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose MPI for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15 by volume.

Size ID 12inch 12mm,OD 0.75inch19mm.Material NBR.. Working Pressure 290psi. Burst Pressure 1160psi. Temperature Range -40F to 257F. Minimum Bend Radius 4.7inch120mm.. Applicable Medium 12 id fuel line can work with dieselbiodieselgasolineOilgreasewater and air,etc.. Application SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check the pressure of application before perchase.. EVIL ENERGY provide this product 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..

4 feet of 12 hose compatible with most PCV systems. Durable hose material resistant to heat and chemicals for a worry-free installation. Meets SAE J30R7 requirements.

ID 12 12.7mm, OD 0.78 inch 19.7mm, AN8 NBR liner hose, 5 feet. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to 275 degrees F. Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc. The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.

Features8AN fuel line hose kit Black braided nylon fuel hose has a full black nylon fiber braided jacket and chlorinated polyethylene CPE synthetic rubber inner line.. Application8AN nylon braided hose kit can usually be used with coolant, diesel, engine oil, hydraulic oil, pump air, air and fuel. Please note that the service life may be shortened when using fuel. Not suitable for E85. This kind of braided 8AN hose can be used for brake system, fuel pump, fuel filter, oil return, oil return system, turbo cooler system, transmission system, oil cooler kit, etc.. Safety FeaturesThe 8AN CPE hose working temperature range -100 to 500 -73 to 260. It is compatible with nearly every substance or agent used. Maximum Working Pressure psi 500 psi. Bursting Pressure psi 2000psi.. Package IncludesThe 8AN fuel line hose kit includes 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends and 58 CPE braided fuel line Length20ft6M. WarrantyProfessional installation is highly recommended. Recommended to use Adjustable AN Wrench. We offers 3 months limited warranty Free lifetime technical support..

HIGH QUALITY MATERIAL - The high pressure fuel line covered with high quality woven Nylon and 304 stainless steel braided CPE synthetic rubber to enhance flexibility and give a cool racing appearance.. NYLON BRAIDED - The braided fuel line can stand -100 to 500 -73C to 260C, 500 PSI Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect... FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes it easier to install. It also results in more fluidity in transmission.. WIDE APPLICATION - The 8AN fuel line specially designed to compatible with any fuel including methanol and nitromethane, oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85.. CUT THE SIZE AS YOU WANT - The 8AN fuel line is 10 Feet 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..

Material innter hose CPE synthetic rubber. The middle layer 304 stainless steel wire mesh sleeve The outer layer High quality braided nylon. Inner Diameter 0.44 11.12mm Outside Diameter 0.64 16.28mm Working Pressure 1000 PSI 69 Bar Burst Pressure 5000 PSI 350 Bar. Operating temperature -40 Degree F to 350 Degree F. You can use this line with racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil coolant..

. 035 wall thickness. 3003 grade aluminum. . 500 O. D.. . 425 I. D.. Fit type Vehicle Specific.

Application Replacement for racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil coolant etc. SizeID AN 8, Length 4.87m16ft, Color Silver. Material innter hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeveThe outer layer High quality braided nylon stainless steel. Working Temperature -40 to 248 Working Pressure 1000PSI Burst Pressure 6000 PSI. Premium nylon and stainless steel wires material, sturdy durable, abrasion and high temperature resistant,Perfect racing Replacement fortings Replacement for fuel injection use.

Blue. -8 AN, Length 2 feet. ID size 12, 12.7mm OD size 34, 19.1mm. Material Made by High-Graded Nitrile Rubber NBR with Textile Reinforced, Covered by Elastomer. Works With Push-On Hose End Fittings, suit 400 510 series hose ends. For use with Fuel System, E85, E10, Oils, Ethanol, Lubricants and Coolant System. Operation Temperature Ranges from -40 C degree to 100 C degree. Working Pressure Rating 280 PSI, Burst Pressure is 800 PSI..