Top 6 Best 2 1/2 Inch Dust Collection Hose

2 - 12 '' x 5' puncture resistant, heavy-duty hose no collapse, tear or kink, Includes 2 stainless steel key hose clamps. Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system. Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation. Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired. 100 Satisfaction guaranteed - 30-day return policy 12-month warranty.

When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more. Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.. PVC Hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3 1.. NO MORE TOOLS Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hoseduct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.. 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home..

PLEASE NOTE As configured, the hose set will connect your 1OD port tools to a shop vac or 2-12 dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-12 dust collection system to a 1-12 tool port, an additional 1-12 screw on adapter, Powertec 70296, is available. Simply remove the 1ID adapter and replace it with the additional 1-12 ID adapter. INCLUDES ONE 10ft dust collection hose, ONE 1 pliable plastic hose fitting, ONE 1-12 pliable plastic hose fitting, ONE 2-14 ABS dust hose adapter, and ONE 2-12 ABS dust hose adapter. APPLICATION Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris. VERSATILE Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-14 adapter should fit most shop vac ports with a nominal ID of 2-14. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application. DIMENSIONS Dust collector hose 1-316 O.D x 10ft long ABS vacuum dust hose adapter nominal 2-12 O.D actual 2-2764 ABS vacuum dust hose adapter nominal 2-14 O.D actual 2-1964 Small pliable plastic fitting 1 I.D Large pliable plastic fitting 1-12 I.D.

When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more. Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.. PVC Hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3 1.. This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.. While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..

Includes one 2-12 diameter 50 feet long left spiral clear flexible hose. Made from high quality PVC for durability, strength and easy installation. Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability. Perfect for any clear view dust collection system allowing you to monitor dust debris separation and vapor smoke filtration. Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 2-12 PVC dust collection systems for woodworking applications.

When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more. Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.. PVC Hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3 1.. This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.. While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.. MADE IN USA. Super flexible hose for maneuvering around all your shop machinery. Clear Vue to see any type of obstruction. Reinforced PVC with a wire helix. Ideal for sawdust collection and other general shop applications.

When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more. ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.. PVC Hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3 1.. This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.. While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..

Made from high quality PVC for durability, strength and easy installation. Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability. Perfect for any clear view dust collection system allowing you to monitor dust debris separation and vapor smoke filtration. Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 2-12 PVC dust collection systems for woodworking applications. Includes one clear flexible hose - 20 feet long 2-12 diameter.

When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more. Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.. PVC Hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3 1.. This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.. While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..

INCLUDES 1 2-12 in. x 20 ft. left spiral transparent dust collector hose and 2 thumb screw 2-12 in. key hose clamps. FUNCTION A practical, safe and cost effective dust collection hose and clamp collection - designed to enhance your existing workshop dust collection and filtration systems. FLEXIBLE PVC HOSE Is reinforced with spring steel wire, puncture resistant, while delivering optimal maneuverability and toughness. HOSE CLAMPS Are made out of stainless steel for rust proof durability and feature a thumb screw design that allows you to quickly loosen or tighten the clamp around the flex hose or item without the use of tools. VERSATILITY Works with an assortment of major brand dust collection systems, indoor ventilation and dryer vent set-ups, along with many common piping, duct work and woodworking applications.

MADE IN USA. Super flexible hose for maneuvering around all your shop machinery. Clear Vue to see any type of obstruction. Reinforced PVC with a wire helix. Ideal for sawdust collection.