Top 6 Best 3/8 Fuel Hose

Nitrile tube that is spiral reinforced for enhanced durability. NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Vacuum rating of 24 inHg for sizes less than 12 in I.D., and 10 inHg for sizes 12 in to 34 in I.D. at ambient temperatures. Warning Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose MPI for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15 by volume.

Size SAE30R6 KX Date Made in USA. Reinforced with two spiral polyester. Color Black.

2-spiral synthetic reinforcement. SAE 30R7. Not for fuel injection systems. Length 1.6 clamshell, 2 clamshell, 25 spool, 50 carton, 250 reel.

5 Foot Piece of 38 ID Black Rubber Fuel Line Made in the USA. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVCNitrile Blend Cover. Designed for Conveying Gasoline E85 and Diesel Fuel. Temperature Resistant from -40 Degrees Fahrenheit to 212 Degrees Fahrenheit.

Size ID 38inch 10mm,OD 23inch17mm. Material NBR.. Working Pressure 290psi. Burst Pressure 1160psi. Temperature Range -40F to 257F. Minimum Bend Radius 3.9inch100mm.. Applicable Medium 38 id fuel line can work with dieselbiodieselgasolineOilgreasewater and air,etc.. Application SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check size and application pressure before purchase.. EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..

Application for racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil coolant etc. Inner Diameter 8.73 mm 0.34 inch, Outer Diameter 14.22 mm 0.56 inch. Working Temperature -40F to 300F. Working pressure 500 PSI. Burst pressure 2000 PSI. Note Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..

Maximum working pressure 50 PSITemperature range -40 F to 257 F. Can be used with unleaded gasoline, diesel fuel, blends of ethanol and sour gas. For transfer of petroleum-based products, fuel line, vapor emission line and vacuum smog control. For fuel line vapor emission crankcase ventilation. This tubing is NOT intended for fuel injection, biodiesel applications, or for use with potable water.

WIDE APPLICATION - NOLY ONT FIT E85The MUGE RACING nylon braided fuel line hose can be used as transmission oil cooler line,fuel return line,fuel supply line,coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line and can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel.. WORK CONDITION - Maximized resistance to heat, corrosion and abrasion.The operating temperature range of CPE hose is -40F to 257F -40C to 125C. Maximum working pressure psi 500 psi. Burst pressure psi 2000psi.The CPE fuel line hose can stand high-temper, and pressure, with long-lasting lifespan,Please check the working pressure and temperature of your system before purchase.. FLEXIBLE DURABLE - The black braided nylon fuel line is braided with outer nylon braided, center stainless steel, Inner synthetic rubber. The construction enhances flexibility and give a cool racing appearance,The fittings and hose separator for the fuel line is made of T6061 Aluminum, anodized finish for high strength and good durability.. A GIFT for CUT HOSE -There is a free duct tape for you,make you easily cut hose without destroying the steel braided,Before you cut the hose,you just need to wrap duct tape tightly at the cut off area and cut through the center of the wrapped up tape rotating the hose during the cut. TIPS - Professional installation is highly recommended.Please do not install it in a corrosive environment,which will affect the service life of braided fuel Line Hose..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Unleaded gasoline, diesel fuel, gasoline blends of ethanol E-10, E85 and sour gas.. Provides a Constant Working Pressure to 50 psi Regardless of I.D.. NOT for Fuel Injected Systems. A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.. Temperature range -40F to 257F, -40C to 125C. Made in USA Clamps included.