Top 6 Best 3d Printer Build Plate

ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.. ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION UNIVERSAL Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Please double-check before attaching the base plate sheet Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90.. Easy to InstallThe magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.. Good AdhesionThe magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.. Easy to RemoveThe magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.. Fast Heat ConductionThe thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.. Heating RangeThe heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLAPLA PlusTPUABSPETGASANylonOthers.. Packing List 3PCSSUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total 2 pieces of coating surface sheets and 1 piece of sticker base sheet..

Compatibility Officially authorized Creality glass bed, applicable for Creality 3D printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 S1, Ender 3 Neo, Ender 3 V2 Neo, Ender-55S, CR-20, CR-20 Pro, other 3D printers with a print area of 220220mm, and most of the Cartesian style 3D printers with an MK2 MK3 hotbed. Please make sure the printing size of your printer's platform is compatible.. No Edge Curling The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be stuck on the build surface firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.. Easy to Remove It is very easy to remove the prints. The surface of our tempered glass bed is a layer of the microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.. Excellent Flatness Upgraded ender 3 build plate with smaller CREALITY logo provides a flatter and smoother build surface than a magnetic mat or PEI sticker, ensuring high flatness for the bottom of mold during 3D printing.. High-Grade Material Made of 100 Genuine Borosilicate Glass, thick and high quality. The glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Using alcohol or acetone to wipe it after repeated use. We offer a 90-day free replacement, any problems, feel free to get in touch with us..

if you get a wrong size,Please replace it and refund.Size 235mm or 180mm,because has a accident.. Double-sided PEI Flexible Printing bed has double-sided PEI coating, both sides can be use,both side is textured.. When printing is complete, let the spring steel sheet cool down enough to around 40C, then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.. The size of flexible PEI build plate 235235mm9.259.25inch,PEI sheet is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines.. Easy to install Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your printing build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing..

Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.. Size 235mm x 235mm.. Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism. Easy to install, easy to remove the models by bending or popping it off. No more tape, no more glue, no more shovel, and release your printing anxiety.

Recommended hot bed temperature when using PLAPLA 45 Celsius to 55 Celsius the larger the printing model, the higher the temperature of the hot bed. Recommended hot bed temperature when using PETGPETG 60 Celsius to 80 Celsius the larger the printed model, the higher the hot bed temperature. Strong AdhesionAfter the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.. Easy to Use and FlexibleHas certain flexibility and can be bent. After cooling, the model is loose and easy to take.. Good compatibilityCan print a variety of consumables, such as PLA, PETG, TPU, ABS, etc..

Easy to Remove Model within 1 Minute The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.. High Viscosity and Strong Adhesion Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.. 0.15MM of Flatness Recovery Model This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.. Wear-Resistant and Scratch-Resistant, easy to clean There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.. High Hardness and Durable This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness..

Flexible and Magnetic Platform The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from falling off during printing.. Robust and durable stainless steel material The magnetic printing platform is made of high quality stainless steel material and has good elasticity. After bending and removing the model, it can be quickly returned to its original state and reused.. Size information The size of the magnetic steel plate is 150 95mm, and the thickness of this platform is 3-4mm, compatible with ELEGOO Mars 3 and Mars 3 Pro. Due to the thickness of the product itself, the printable height of the 3D printer will shrink by 3-4mm. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.. Unique handle design The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.. Installation Tips First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing ..

Hight Flatnesslong lasting Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lastingThe service life of our pei is 10 times longer than other Glass Bed. easy to useEasy to clean simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.It can be cleaned easily with water or alcohol. New upgrade movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time. No Edge CurlingStrong adhesion The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60, without using any glue or other tools to help the model to stick onto the sheet. Packing Textured steel platform coated with PEI surface 1 magnetic bottom sheet with adhesive on the back 1.

Quality AssuranceMade of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The Soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70C.. Wide ApplicationCompatible with PLA PETG PEEK ABS and any other filaments. 235235mm spring steel sheet 3d printer bed works well with Ender 3 Ender 3 S1 Ender 3 v2 Ender 3 Pro Ender 5 Ender 5 ProCP-01CR-20CR20 Pro and other same sized beds.. Great AdhesionPrint molds onto PC build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.. Easy Take MoldEasy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints. Official Creality 3D StoreWe provide professional after-sales support. Please kindly contact usseller via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question..