Top 6 Best 4 Pin Fan Hub

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.. Widely Compatible The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.. Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean tidy.. Package contents 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug..

Thermalright is a Taiwanese brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R D product lines include CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.. Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.. Small body, large capacity. Multi line control to keep cables in order.. This fan hub supports the installation of 10 groups of fans, making it easy to manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.. Support fan speed reading. due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized.. Stable OutputFan hub synchronizer is SATA power direct output, in the state of high load, can maintain stable output, compact size, top surface with Thermalrigh engraved logo, overall colour, stable functionNote SATA cable needs to be purchased separately, this product is not configured.

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note Max current limit is 3A in total, check the spec of fan first.. In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.. There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.. If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..

01Support PWM function.. 021-to-7 PWM connectors.. 03Compact size at only 105mmW40mmD15mmH.. 04Powered by a stable SATA connection to the system PSU for up to 7 fans.. 05Compatible with 3-pin4-pin fansSpeed control function is unavailable for 3 pin fans. Attached 3 pin fans will run at maximum RPM.

4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header PWM splitter cable connects an additional fan to increase airflow in your computer case Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans. PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans PWM fans can spin at the same speed using software from a motherboard equipped with PWM control. CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans. Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case. 3-pin 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans Add more cooling to your computer with this PWM fan splitter cable.

MOST EFFICIENT SATA TO FAN ADAPTER IN 2019 Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat tidy way to add fans expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down speed up the fans up to the maximum speed. You need to connect the SATA the 4 pin at the same time to run multiple fans.. PWM FAN CONTROLLER TEMPERATURE CONTROL The CPU Port red port, would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.. INSTALLATION CONFIGURATION Simple installation easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. STEP BY STEP SET-UP You will receive 1 hub 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hubs PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attachstick it on the chassis.. MONEY BACK PRODUCT WARRANTY Our product is backed up by manufacturers warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100 refund. We will go an extra mile to redress the situation at hand..

Excellent 1 to 10 splitter 10 way 4-pin PWM fan power supply extension hub, it provide a better power supply solution for atx PC computer case internal motherboard cooling fans cpu fans.. Widely Compatible support 4-pin and 3-pin pc case fans cable this 1 to 10 splitter 10 way fan power extension hub compatible with 4-pin and 3-pin pc case fans.. Plug-n-Play, easy to use 10 splitter 10 way 4 pin PWM pc case fan hub.. The 10 splitter 10 way extension hub offers greater flexibility between motherboard and cooling fans in the atx pc case.. Please be kindly noted that this 10 splitter pc case fan hub need to be connected with the 15-pin SATA power supply cable And the PWM interface should be connected to CPU_FAN port on the motherboard with the dedicated cable in the package..

Expand Fan Interfaces - Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans.. Function - Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time.. Widely Compatible - For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor.. High Performance - The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance.. Glue Fixation - The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis..