Top 6 Best 6an Fitting

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

The female AN6 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed. Package 2PCS.. 6AN 90 degree swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose.. These new full flow swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place.. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling.. EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Fit for all stainless braided and nylon braided hose,Not fit for PTFE fuel line and rubber fuel line.. Material T-6061 Lightweight Aluminum Alloy, Anodized Finish for Durability. Application Universal,such asOil Fuel Water Fluid Air Line. Swivel design for easy assembly,The adjustable AN wrench is highly recommended.. Package include4X Straight Swivel Fuel Hose End.

WIDELY USED-6AN straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas etc. Bulkhead Fitting perfect to apply in automotive, industrial, boatmarine etc. The male flare fitting fit all oil cooler fuel tank fuel pump fluid Line turbo.. Advantage The 6an male flare to 38 npt fitting has one male side AN is a 37 degree flare fitting taper and the other male side NPT is a 60 degree tapered threads, assures a tight seal and ease of operation. These adapter hose fittings are designed to quickly make professional 37 AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight secure and leaks free connection.. NPT National Pipe Taper requires some kind of sealant placed on the threads before assembly. NPT threads creates a seal by a wedging action.It is a tapered threads and can give an effective seal for pipes using hydraulic fluids.Unlike straight threads found on a bolt, a taper thread will pull tight, making a closer seal.To ensure a leak-free seal in NPT fittings you need a sealant compound or PTFEPolytetrafloroethylene tape.. Made of High Performance Lightweight 6061-T6 Billet Aluminum Material.One side is AN standard and the other is NPT National Pipe Taper Thread. Fuel Line Connector are designed for a smooth flow, and easy assembly. All threads are designed for maximum percentage of engagement. Each straight fitting is completed with a black anodized finish for corrosion protection.feature anti-rust, waterproof, oil-proof. Straight Bulkhead Flare is sturdy, strong and reliable.. EVIL ENERGY provide this product 3-month warranty.Please contact us first if you have any doubts after receiving the product..

100 QUALITY MATERIALNylon Braided CPE Synthetic Rubber The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.. EFFECTIVELYThe fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.6an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on.. USEFULInner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature -40 F to 248 F-40C to 120C under most operating. Working Pressure500 PSI. Package Including10pcs 6AN hose fitting 16Ft AN6 Stainless Steel Oil line 6pcs 6AN Hose Separator Clamp 2pcs 6AN male coupler. 100 SATISFACTIONIf you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..

Package Included 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter. Thread size of 6AN male coupler is 918-18 JIC, can use to splice or extend a line, works with female thread fitting.. Black 6061-T6 aluminum 6AN flare union work temperature -65 to 252 degree F, max pressure 1000 psi, ultimate torque 25N.. Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system.. Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..

Steel braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications.. The AN6 stainless steel braided PTFE fuel injection line kit includes 10pcs 6AN PTFE hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN6 PTFE braided fuel line Length 16feet. Braided Fuel Hose Inner Diameter 516. Outside Diameter 0.43inch. Please measure before purchase. Working temperature range -76 to 446 -60 to 230. Maximum Working Pressure psi 3000 psi. Bursting Pressure psi 10000psi. AN-6 stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.. PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced.. The 6AN PTFE hose working temperature range -76 to 446 -60 to 230. Maximum Working Pressurepsi 3000psi. Bursting Pressurepsi 10000psi. PTFE tube fuel line length 25Ft, Inner Diameter 516. Outside Diameter 0.465inch. Please measure before purchase. 25Ft 6AN braided fuel injection line kit includes fuel PTFE tube and aluminum alloy fitting adapter 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, 2pcs 6AN to 14NPT hose adapter fitting, 2pcs 6AN to 38 hose adapter fitting, 1pc 6AN to 516 hose adapter fitting, 1 pc AN6 to 38quick disconnect male.. The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.. A PTFE tube has less volumetric expansion than a rubber tube and is non age sensitive for an unlimited shelf life. Professional installation is highly recommended. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to provide quality product and service..

APPLICATION- EVIL ENERGY 6AN ORB to 6AN Flare adapter is widely used in Oil Fuel Water Fluid Airline Gas hose Ends. The 6AN Male port fit all oil cooler fuel tank fuel pump fluid Line. The fitting has 37-degree AN sealing angle design and another ORB port design assures leak free performance.. ORB adapter uses a male fitting with an o-ring to seal in a female port with an angled section where the o-ring seats. O-ring boss adapter has a straight thread and therefore do not damage the mating part. This fitting seals by the o-ring and the only thing it really needs is a little bit of lubrication on the o-ring, petroleum jelly or some sort of petroleum product such like oil. This design makes the fitting reusable.. Easy to install. Apply a bit of petroleum jelly to o-ring before installation. When installing straight ORB-6 fitting, screw fitting into mating part until preformed packing is fully seated in mating packing seat. Tighten fitting until snug. Check ORB fitting for leakage during system start up. If leaking, loosen connecting tube or hose and tighten ORB fitting. Re-tighten tube or hose.. The ORB fittings are made of high-quality aluminum alloy material for strong strength. Anodized and hand polished finish add the final touch of quality and protection. Black anodized for great appearance and anti-corrosion, superior thread strength. The o-ring is made of NBR, features with excellent oil resistance and heat-resisting Temperature Range -40F to 212F. The adjustable wrench is highly recommended. ORB adapter can be reused and recycle. Due to the high-quality material which makes 6AN ORB fitting worked last for long. Six-month warranty provide by EVIL ENERGY. We value your shopping experience and strive to offer a high-quality product and service..

6AN braided fuel hose kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 1132. Hose OD 0.543inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..