Top 6 Best Anchoring Epoxy

Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive.. SUPPORTS It can be used on concrete solid, masonry, steel, hard natural stone, solid rock.. USES Fast curing anchoring adhesive for rebars reinforcing steel, threaded rods, bolts and special fastening systems.. PERFORMANCE High load capacity. Drinkable water certified. Anchoring without expansion forces.. APPLICATION Applied with standard guns and by experienced professionals.

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry. High-tack paste resists moisture for application in damp environments and can be used in vertical applications. Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to 115 degrees F. Provides work time of 20 minutes and cure time of 4 hours at 75 degrees F. Meets ASTM C881-99. Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry.. PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements.. PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete.. PC-Concrete is the best solution for permanent concrete repair..

ICC-ES ESR 2582 - Category 1, Cracked and Uncracked Concrete. Bonding threaded rod and reinforcing bar into hardened concrete and masonry. Can be installed in a wide range of base material temperatures. Consistent performance in low and high strength concrete 2,500 to 8,500 psi.

HIGH STRENGTH FASTENING Our concrete epoxy high strength system will help you with the toughest fastenings. You can use it for different fastenings - from light medium loads likehandrails safety fences to heavy loads like railway tracks,machinery and ground anchors.. ENOUGH WORKING TIME This anchor epoxy system gives you enough time to install it after you dispense it in the concrete hole. You have 4 to 10 mins to install the rebar or threaded rod in the concrete epoxy resin. Forget about having to re-drill the hole because of quick setting anchors.. FAST CURING Our epoxy anchors for concrete will provide you with a quick setting solution for your fastenings. Depending on temperature of the base material it will take between 40 to 145 mins to load the anchors fully. And you can move on to your next job. VERSATILE USE This concrete epoxy can be applied in both dry, wet and flooded concrete holes. The anchoring epoxy provides high strength bond not only to concrete, but also to solid and hollow masonry, hard natural stone, solid and voided rock.. STANDARD APPLICATION TOOLS You will not need any special equipment - this 10.1 fl. oz. cartridge system is suitable for standard application gun. This concrete resin anchor epoxy can be used in different kinds of jobsites with universal equipment..

EFFECTIVE High-strength, moisture tolerant, resists chemicals and solvents. FAST-DRYING Sets in 12 minutes, fully dry in 16 hours. EASY TO USE No mess application tube. VERSATILE Great for concrete floors, walls, driveways, stairs, anchor bolts, dowels, and rebar in concrete and masonry. BLENDS IN Gray in color to match existing surfaces.

Jobsite versatility can be specified for dry and damp conditions when in-service temperatures range from 40F 40C to 150F 65C. Easy hole cleaning no power-brushing required. Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry. Suitable for use in dry or water-saturated concrete. Manufactured in the USA using global materials.

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry. High-tack paste resists moisture for application in damp environments and can be used in vertical applications. Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to 115 degrees F. Provides work time of 20 minutes and cure time of 4 hours at 75 degrees F. Meets ASTM C881-99.

HIGH STRENGTH FASTENING Our concrete epoxy high strength system will help you with the toughest fastenings. You can use it for different fastenings - from light medium loads likehandrails safety fences to heavy loads like railway tracks and ground anchors.. ENOUGH WORKING TIME This anchor adhesive system gives you enough time to install it after you dispense it in the concrete hole. You have 3 to 20 mins to install the rebar or threaded rod in the concrete epoxy resin. Forget about having to re-drill the hole because of quick setting anchors.. FAST CURING Our epoxy anchors for concrete will provide you with a quick setting solution for your fastenings. Depending on temperature of the base material it will take between 3 to 24 hours to load the anchors fully. And you can move on to your next job. VERSATILE USE This concrete adhesive can be applied in both dry and damp concrete holes. The anchoring epoxy provides high strength bond to both concrete and steel surfaces.. STANDARD APPLICATION TOOLS You will not need any special equipment - this 20.2 fl. oz. cartridge system is suitable for standard dual cartridge application gun. This concrete resin anchor epoxy can be used in different kinds of jobsites with universal equipment..

HIGH PERFORMANCE Sika AnchorFix 500 adhesive anchor system has been specially formulated as a high performance, two component adhesive anchor system for threaded rods and reinforcing bars in uncracked concrete to suit transport applications.. ADHESIVE ANCHOR Sika AnchorFix 500 is an epoxy resin specialized in fixing close to free edges and anchoring without expansion forces, It has a versatile range of embedment depths and has an extended working time. Suitable for transport applications, DOT doweling, airport runway doweling, machinery mounting and bracket mounting in dry concrete. Use as an adhesive anchor or as a pick-proof seal around windows, doors and grilles.. AWESOME VALUE Sika AnchorFix 500 comes packaged in standard 10.1 fluid ounce cartridges 2 components within, side by side with static mixing nozzle. Our AWF PRO Epoxy Applicator has 251 Thrust Ratio and works wiith High Viscosity Epoxies, Acrylics and Urethanes with 2 Part Cartridges. Nitrile Gloves help protect against the epoxy getting on your hands.. TESTED AND APPROVED AnchorFix 500 has been tested according to ASTM C 881 Type I, II, III, IV, Class C, Grade 3. SPECIAL NOTE This product is approved for short term loads and per the NTSB should not be used in sustained tensile load anchoring applications where failure could result in a public safety risk. Do not use in expansion moving joints..

Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations. Forms a clear hard rigid bond self leveling liquid in minutes. Functional strength in 1 hour. 100 reactive, no solvents. Low viscosity 10,000 cps.