Top 6 Best Andon Lights

High intensity LED signal light with low power consumption, can be viewed easily at a distance. Long lasting LED light-100000 hours lifespan, built-in buzzer-90db beep alarm, durable construction for long lasting use. Each tier of lights can be switched to continuous or flashing light modes. Rated IP54 against dust and moisture, NEMA 5. These are Andon lights for use in factories or on industrial machinery. Typical uses are as Automated machinery status lights, operator signal lights, or as lean tower lights.

A new generation of Industrial Signal Stack Tower Lights, adopting high performance LED chips, provide high brightness light source with low power consumption and 100,000 hours lifespan, no need to replace the light source all the life. This Tower Light equipped with prism-cut PC lampshade lenses for even light distribution, it has a 360-degree viewing angle, can be viewed easily at a distance. Each tier of lights can be switched to continuous or flashing light modes as needed. Rated IP54 against dust and moisture, NEMA 5 for industrial exposed environment. These tower lights rated IP54 against dust and moisture for industrial exposed environment, integrated 80db alarm buzzerOptional.

3 Stack LED Tower Lights Workstation, Ready to Install and Use - Industrial, Warehouse, Indoor Rated. Only 2 Bolts to Install and Plug into 85VAC to 264VAC Socket, You can Running your Andon Light. 60MM Tower Stack Lights,Default DIP switch Settings BuzzerRed Flashing, Yellow Steady, Green Steady, 85dB Buzzer, 24 Larger LEDs Super Bright. 8-Inch Pole, 2-Hole L-Bracket, 3 Industrial OFFON Selection Swithes, Control Box, 6-Inch Power Adapter. This is a Very Efficient Visual Communication Tool, Helps Improve Productivity and Saves You Time and Money.

SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red and Green LED Andon Tower Light with 2 switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Andon Lights Stations Built the Way You Want, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord.. CUSTOMIZABLE ANDON PARTS KIT INCLUDES Bright LED Tower Light 110VAC, 10 Threaded Pole w Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color Switch Operation Labels, Drilled Holes for Light, Power Cord, Two 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors Wiring Instructions. DOES NOT INCLUDE Required electrical knowledgeaptitude, screwdriver, wire strippercutter, wrenches, multimeter, crimper.. SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section Not like other cheap, spotty LEDs or replaceable bulbs. Lenses are replaceable in case of damage and should last for 10 years in most applications.. ECONOMY SOLUTION - Buying Parts and Putting Together your Andon Signal Light Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for a Completely Assembled Andon Light System, Please Search on Amazon for Signaworks LED Andon Tower Lights that are Fully Assembled and Plug-and-Play Ready. as well as other other Industrial Signal Products. ASSEMBLY REQUIRED - This kit is for someone who can wire electric circuits such as switches and lights using 120 VAC power. Assembly requires cutting and stripping wires, crimping connectors, wire termination, mechanical assembly and testing. This kit will assist in building a custom andon system for your needs including conduit for power, control wiring or direct connection between light and switch box. For Fully Assembled Units, search Amazon for Signaworks ASTL Andon Tower Lights.

2 Stack LED Tower Lights Workstation, Ready to Install and Use - Industrial, Warehouse, Indoor Rated. Only 2 Bolts to Install and Plug into 85VAC to 264VAC Socket, You can Running your Andon Lights. 60MM Tower Stack Lights,Default DIP switch Settings BuzzerRed Flashing, Green Steady, 85dB Buzzer, 16 Larger LEDs Super Bright. 9-Inch Pole, 2-Hole L-Bracket, 2 Industrial OFFON Selection Swithes, Control Box, 6-Inch Power Adapter. This is a Very Efficient Visual Communication Tool, Helps Improve Productivity and Saves You Time and Money.

LUBAN Industrial Signal Stack Tower Lights, adopting high performance LED chips as the light source to provide high brightness light with lower power consumption and at least 50,000 hours long lifespan. This Tower Light equipped with prism-cut PC lampshade lenses for even light distribution, it has a 360-degree viewing angle, with a height adding pole, it's easily viewed at a distance in the workshop. Each level equips 3x3 continuous light LED chips in 3 different directions, 90dB hi-frequency buzzer alarm optional for adding an audible warning to be heard above the noise of surrounding machinery. Standard aluminium pole length 6 inches with L-bracket for mounting installation When not using an L-bracket, make a fitting hole of 18-20mm. These Andon Lights for use in factories or on industrial machinery. Typically used as Automated machinery status indicator lights, operation signal lights, safety warning lights.

Signaworks 2Stack LED Andon Light Station - Complete Industrial Rated Andon Tower with 8' Long 3 Prong Power Cord to Meet OSHA Standards, 2 Switches for Steady OFF-ON Operation, Switch Box, Pole, Lights for Plug Play Ready Operation- Indoor Rated. High Brightness Lights - 2.25 Inch Diameter Super Bright LED Tower Light with 24 LEDs for Red 18 Larger LEDs for Green with 12 Sided Polycarbonate Lens for Ultimate Visibility on the Factory Floor or Commercial Environment.. Industrial Construction - Rugged Through Bolt Light Design, Heavy Gauge Steel Right Angle Bracket with 2 Bolt Mounting Holes, 183 Prong AWG 300V Industrial Power Cord, 12 inch Long Pole, 2 Industrial Off-On Selector Switches - Do Not Settle for Cheap Substitutes on Lights, Power Wires, Brackets or Poles.. Simple to Mount - Use 2 Mounting Bolts in Right Angle Bracket, Plug in 18 AWG, 3 Prong Power Cord to 120VAC Outlet You are Up Running.. Signaworks is a family owned business in Powell, Ohio and has been the Industry Leader in Andon Lights since we pioneered the First Industrial Andon Tower Light in 1996. Still MADE IN THE USA We are here to Service You or Answer Any Questions you have with Real English Speaking People. Look for More Signaworks Lean Manufacturing Productivity Tools on Amazon..

2 Stack LED Tower Lights Workstation, Ready to Install and Use - Industrial, Warehouse, Indoor Rated. Only 2 Bolts to Install and Plug into 85VAC-264VAC Socket, You can Running your Andon Light. 60MM Tower Stack Lights, 16 Red LEDs, 16 Green LEDs, Very Bright. 9-Inch Pole, 2-Hole L-Bracket, 2 Industrial OFFON Selection Swithes, Control Box, 6-Inch Power Adapter. This is a Very Efficient Visual Communication Tool, Helps Improve Productivity and Saves You Time and Money.

52mm Indoor Red, Yellow, Green Andon Light. 24VDC Steady operation. Light. Wiring is switched 24VDC with -Ground as common and the light pulls less than 4 watts per color.Continuous activated light is ideal for devices that want solid light state activation OR have the ability to pulse output from the controlling device. Great tool for any warehouse, factory floor, lab or facility needing visual notification or status at a glance.. Our LED andon lights are one of the only products to offer easy BA15S LED replaceable bulbs for long term, inexpensive maintenance. No need to replace the entire fixture when you can replace a simple bulb.. Great for operator stations, material request, call lights, machine monitoring and more. Warehouse use for workstations, inventory replenishment systems. Great for any machines needing simple operator attention. Can be used for cycle timing alerts, changover timing, downtime status, maintenance acknowledge and more.. All LD-52xx andon lights come with a 3.5 inch aluminum pole with 90 degree angle bracket mount and mounting nuts and washers. Pole is M16x2.0. Lights are prestrung with minimum of 38 inch wire lead for ease in install and termination..

52mm Indoor Red, Yellow and Green Andon Light. 120VAC with dry contact closure logic. Light comes with internal buzzer for optional termination. Light supplies power pair, steady common, flashing common, and color wire corresponding to it's light for simple contact closure activation. Buzzer uses gray internal wire for optional use. Great tool for any warehouse, factory floor, lab or facility needing visual notification or status at a glance.. Our LED andon lights are one of the only products to offer easy BA15S LED replaceable bulbs for long term, inexpensive maintenance. No need to replace the entire fixture when you can replace a simple bulb.. Great for operator stations, material request, call lights, machine monitoring and more. Warehouse use for workstations, inventory replenishment systems. Great for any machines needing simple operator attention. Can be used for cycle timing alerts, changeover timing, downtime status, maintenance acknowledge and more.. All LD-52xx andon lights come with a 3.5 inch aluminum pole with 90 degree angle bracket mount and mounting nuts and washers. Pole is M16x2.0. Lights are prestrung with minimum of 38 inch wire lead for ease in install and termination..