Top 6 Best Arduino Servo Motor

Communication Interface IIC. 16-way steering gear control. Voltage DC5-10V power supply. The PCA9685 chip is wrapped in the center of the board. All PWM output lines have a 220 ohm series resistor protection and can easily drive LED..

Features Interface Type Compatible with JR FUTABA interface. Created from the Highest Quality Parts Available and Put Together with Care, to give You the Best Experience in Controlling Your Remote Controlled Vehicle.. Servo Motor Specs No Load Running Speed 0.090.01 sec60 Degree at 4.8V Stall Torque 4.8V 17.5ozinch 1kgcm, Type Analog Controller, Operating Voltage 4.8V - 6.0V, Left Right travelling Angle deviation 6 Degree, Centering deviation 1 Degree, Maximal Angle 120 Degree Neutral position 1500 sec, Dead band width7 sec, Rotating direction Counter Clockwise 9002100sec, Pulse width range 9002100 sec, Operating Temperature Range -1050elcius. Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system.. Set Contains 1x SG90 Micro Servo Motor 9G, 1x 3 Colored Cable Brown Yellow Red with a Futaba Connector Plug, 3x Servo Horn Steering Arms, 3x Stainless Steel Screws in different sizes 9mm 5mm. High quality product by MMOBIEL Each part is tested before shipment. Item in Stock..

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi. Interface Type Compatible with JR FUTABA interface. Running Speed at no load 0.09 0.01 sec604.8V 0.08 0.01 sec606V. Running angle 180 degree. Stall Torque 4.8V 17.5oz in 1kgcm. Dead band setting 7 ms. Amplifier Type Analog controller. Operating Voltage 4.8V6.0V. Please Note The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support.

Application Fields remote control helicopters, micro robot, robot arm and boats. ALL kind of RC Toys and Arduino experiments. Interface Type compatible with JR Futaba interface.. No Load Running Speed 0.090.01 sec60 at 4.8V Rotary Angle 120. Stall Torque 4.8V 17.5oz in 1kgcm.Dead band width 7usec. Amplifier typeAnalog controller Operating voltage 4.8V6.0V.

DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo. High reliabilitygood stabilitystrong adaptability, Low noisesmall vibrationsmooth operationlong life. Copper Aluminum Stainless Steel Aluminum. High performance digital standard servo,High-precision metal gears Stainless steel gearwith hard anodizing. CNC aluminium middle Shell,Dual ball bearings.

MG90S Micro Servo Motor, updated SG90 serve motor.. Stall Torque 2.0kgcm4.8V. Operating Speed 0.11 seconds 60 degrees 4.8V. Metal Gear with less noise. Structural Material Aluminum metal teeth, coreless motor, double ball bearin.

WHY CHOOSE IT This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. the Speed, Tension and Accuracy allincrease.This high-speed standard servo motor can rotate 180 degrees 90 in each direction.. WIDE APPLICATIONS The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys.. ELECTRICAL SPECIFICATION The MG996R Servo Torque at 4.8V 13.5kgcm, 6V 15.2kgcm. Positioning speed at 4.8V without load 0.17s 60 degrees6.0V without load 0.15s 60 degrees. Recommended voltage 5V, current use 3A.. STABLEPERFORMANCEStable and shock-proof iron core motor, metal gears, power supply through external adapter.. Tips If youre not completely satisfied for any reason, simply return it or contact us.Your 100 satisfaction is our goal..

Applications SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project. Interface type This SG90 servo is compatible with JR Futaba interface. Operating speed 0.12 second 60degree 4.8V no load, 0.1 second 60degree 6.0V no load, Max rotation angle180 degrees. Stalling torque 17.5ozin 1kgcm Dead zone width 7 microseconds Amplifier type analog controller Working voltage 4.8V6.0V. Reminder The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.

Metal Gear Servo with a brushed DC coreless motor inside, making quick response, strong adaptability, and low electromagnetic interference.. Stall Torque 12 kgcm4.8V, 15kgcm6V. Metal gear and dual-ball bearing.. Dimensions 54.1 x 20 x 44.3 mm Weight 55g. Supports voltage control in bipolar driver mode. Suitable for 16 Years Older..

Full ball bearing and provides high durability, fine workmanship and good performance, light in weight, low noise, easy to install, easy to use.. Stall torque 1.8kgcm4.8v, operating speed 0.1sec60degree4.8v, operating voltage 4.8v.. Dark grey GND, red VCC4.8-6V, orange line pulse input.. Suitable for swash plate servo, fixed wing, helicopters KT, fluttering, gliding, small robots, etc..

SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.. Mini Servo - small servo motor compatible with JR Futaba interface. Micro servo running speed at no load 0.090.01 sec60 4.8V 0.08 0.01 sec606V. Running angle 180 degree.. Micro Servo Motor - Stall Torque 4.8V 17.5oz in 1kgcm. Dead band width 7usec. Operating Voltage 4.8V6.0V.. Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.. Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally..