Top 6 Best Automotive Performance Fuel & Water Separators

High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration. Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting. Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI. Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth unit weight is only 19 ounces and features 12 inch NPT pipe threads ports made of solid billet aluminum to eliminate porosity, leaking or air intrusion.

Designed for marine use to provide superior fuelwater separation and fuel filtration at high fuel flow and using the same design and high efficiency filtration in the popular FloMax300 the RPM500 provides additional water and debris holding capacity. Highly efficient 3 micron filtration and water separation designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of applications. Engineered for either suction or pressure side mounting for installation flexibility plus the multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port and other fuel accessories. Burst pressure for this unit is 250 PSI and measurements are 8.0 inch height, 3.75 inch width and 5.0 inch depth weighs only 45 ounces features -12 AN ports that are ORB multi-directional designed to handle over 2000 HP. Made of solid billet aluminum to eliminate porosity, leaking or air intrusion exclusive EZMOUNT design allows easy mounting on a tube chassis or a surface mount made in USA and backed by a full 60 day limited warranty.

High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration. Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting. Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI. Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth unit weight is only 19 ounces and features 12 inch NPT pipe threads ports made of solid billet aluminum to eliminate porosity, leaking or air intrusion.

Replacement filter element which is totally self-contained and requires no messy and questionable canister cleaning eliminates cartridge style filter back flushing and totally eliminates any chance of fuel system contamination. With the filter sealing system there are no housing seals or gaskets to dig out and no gaskets, o-rings or seals to leak or swell. The RF500M unique flow pattern increases filtration efficiency and provides the maximum flow and the heart of the FloMax system. Patented filter flows 300 gallons per hour down to 3 microns with a total of 579 square inches of filter media and water capture reservoir.

Replacement filter element which is totally self-contained and requires no messy and questionable canister cleaning eliminates cartridge style filter back flushing and totally eliminates any chance of fuel system contamination. With the filter sealing system there are no housing seals or gaskets to dig out and no gaskets, o-rings or seals to leak or swell. The RF500 unique flow pattern increases filtration efficiency and provides the maximum flow and the heart of the FloMax system. Patented filter flows 300 gallons per hour down to 4 microns with a total of 183 square inches of filter media and water capture reservoir.

This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water. Notice This a separator for Diesel Water, It could not be for Petrol Water separator, R12T Fuel Filter Water Separator 120AT NPT ZG14-19 with Fitting Complete Filter Assy. Filter is designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. Don't be caught in the water without one of these diesel spin-on filters. Fuel Water Separating Filter fit 38 Inch NPT Outboard Motors as well, 10 micron filters are over 90 efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from gasoline. The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance,instruction 1.Nylon collection bowl down when installed the water separator and filter. 2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them. 3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them..

AttentionPlease tighten the filter by yourself when installing it.Please fill the filter with fuel when installation.. The filter housing is coated with a durable electrostatically applied powder coating for superior finish quality.Remove water and particles down to 10 microns in size,ensures that fuel arrives at your engine clean and water-free with its advanced high-capacity filter media.Provides best protection to your engine and improve its performance.. This spin-on filter design is easy to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted impurity and water.Tighten the valve,the water will not discharge.Release the valve,the water can be free to discharge.. Filters are designed for high performance applications,and with flow rate of 15 GPH on the R12T model,your engine will perform better than ever with clean,water-free fuel.. For R12T Marine Fuel FilterWater Separator complete assembly.NPT,ZG14-19.PortConnecting Size M18 X 1.5 Center ThreadInclude 2 fittings,2 plugs.Part NumberReplaces Racor S3240 R12T 120ATReplaces Sierra 18-7987Replaces RK10222..

New upgrade This product is an upgraded version of R12T. The R12T filter element is not removable, and the housing needs to be replaced at the same time as the replacement. The R12H filter element is detachable, and you only need to replace the internal filter element each time, which greatly saves your cost. Please note The internal filter element requires a certain amount of effort to be pushed out.. Buyer Benefits Two filter elements and two O-rings are given for free, so there are three filter elements and four O-rings in total. Package includes 1 x R12H Fuel Water Separator complete combo, 2 x connection fittings, 2 x plugs, 2 x additional filter elements, 2 x additional O-rings.. Material Upgrade For ships going to sea, iron products are very easy to be damaged due to the influence of seawater and sea breeze. The upgraded R12H adopts aluminum alloy material and plastic-sprayed processing technology as a whole, which effectively avoids the above-mentioned problems.. Replace Part Number S3240 R12T 120AT, 18-7987, RK10222.. Features This spin-on filter design is easy to replace, and other parts except the filter element can be reused. The black valve under the transparent nylon collection bowl can control the discharge of water. The R12H filter is designed for high-performance applications, and with a flow rate of 15 GPH. Through the advanced large-capacity filter media, water and particles as small as 10 microns are removed to ensure that the incoming fuel is free of water and other particles..

Part Type Fuel Water Separator Filter. Manufactured By Mopar. Model Number 68043089AA. Alt Model. Alt MPN 68043089AA. Product Weight 3.30 lbs.. UPC NA. Condition New. Vehicle Specific Fitment. Ships from within the United States.

AttentionPlease tighten the filter by yourself when installing it.Please fill the filter with fuel when installation.. The filter housing is coated with a durable electrostatically applied powder coating for superior finish quality.Remove water and particles down to 10 microns in size,ensures that fuel arrives at your engine clean and water-free with its advanced high-capacity filter media.Provides best protection to your engine and improve its performance.. This spin-on filter design is easy to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted impurity and water.Tighten the valve,the water will not discharge.Release the valve,the water can be free to discharge.. Filters are designed for high performance applications,and with flow rate of 15 GPH on the R12T model,your engine will perform better than ever with clean,water-free fuel.. For R12T Marine Fuel FilterWater Separator complete assembly.NPT,ZG14-19.PortConnecting Size M18 X 1.5 Center ThreadInclude 2 fittings,2 plugs.Part NumberReplaces S3240 R12T 120ATReplaces 18-7987Replaces RK10222..