Top 6 Best Axle Puller

Easy to disassemble Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy . Material CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life. Benefits Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release Two piece CV axle popper tool kit ensures fitment for most FWD vehicles. Easy installation Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool . 100 Satisfaction Guarantee If you're not 100 satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support 12-Month Warranty..

Easy To Remove CV Axle Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components. Heavy Duty Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break. Effient Slide Hammer Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently. Wih 63mm 48mm Joint Fork Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use. Combinnation Kit This kit include 1 heavy duty slide hammer 1 opening 63mm cv joint fork 1 opening 48mm cv joint fork 1 manual puller 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry, and we offer 12 months warranty, we will refund or replace, if the tool have any quality problem.

PULL CV JOINTS AXLES This CV joint puller tool set by Orion Motor Tech is compatible with Ford Taurus and Mercury Sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes. MULTIPURPOSE SLIDE HAMMER Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly its threading also lets you use it with other 58-18 adapters to deal with other makes and models or to handle other work around your engine. DURABLE PULLER ADAPTER The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch. QUICK EASY OPERATION These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched. BUILT TO LAST Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependable service for the long haul heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long use.

Services the wide-style Inner CV Joint Assembly, found on Ford F150 4WD and other vehicles. 63.5mm wide opening allows proper fitment wide applications. Applications include, but are not limited to 1997-2017 Ford F-150 4.2L, 4.6L, 5.4L, 2010-2014 Ford F-150 SVT Raptor 6.2L, 1997-2017 Ford Expedition 4.6L, 5.4L, 2007-2015 Lincoln Navigator 5.4L. To check compatibility with applications not listed, refer to dimensions in product image. 58 - 18 threaded hole works with CTA A490 Puller and other standard pulling tools. Forged steel construction with black finish.

With the Tiger Tool 11001 you can easily remove even the most seized axle shaft in minutes on medium to heavy-duty Dana, Eaton and Rockwell drive axles. This part number includes most common 58 18 Axle Stud Adapter Set additional adapter sets also available.. Application Commonly found on class 6-8 transportation trucks and equipment. for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo etc.. The Axle Shaft Puller has fully adjustable pulling arms and stud adapters are quick and easy to install. This tool reduces the risk of damage to axle studs. The 11001 is made from top grade metals and various treatments safeguard the integrity of the driver, enabling it to be struck again and again.. The head of the driver is rounded, ensuring the load of the hammers force is more accurately distributed down the center of the tool. Pull-cams are preloaded behind the axle flange. The force of the impact shocks the cone washers free, allowing the axle shaft to be released with ease. Pull cams are heat treated to minimize wear and prevent rounding off maintaining the tools longevity and effectiveness.. The Tiger Tool Commercial Axle Shaft Puller, part number 11001, is proudly made in North America to ensure you have what it takes to get the job done right..

Scope of use suitable for disassembling the half axle drive shaft of most vehicles. Use this CV shaft tool kit to easily disassemble the CV shaft without damaging your vehicle, saving your time and energy. Easy to operate the CV joint pulling tool can be connected to any slide hammer with 5 8 - 18 threads and allows you to generate additional torque to loosen and remove the stubborn shaft and water pump. Connect the internal CV removal tool to the slide hammer, slide the adapter around the shaft behind the internal shield, and use the slide hammer to generate torque to pull out the shaft.. High quality material made of high-quality hardened steel after heat treatment, which can ensure the best strength and durability, as well as rust prevention and corrosion prevention. Very suitable for professional maintenance personnel.. Advantages the internal CV shaft removal tool is better and safer than using a hammer and rod. The two-piece CV shaft Popper tool kit ensures that it is suitable for most FWD vehicles. The front wheel drive shaft puller is different from the crowbar or CV shaft fork tool,The CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.. 100 Satisfaction Guarantee-- If you're not 100 satisfied with this tool set, simply return it for a full refund in 30 days. Premium Support 12-Month Warranty..

Made to be the most reliable tools in the market today. Tool solutions for most all situations. Built to exceed tool standards. Removes front and rear axles, axle bearings and seals from front and rear wheel drive vehicles. Can also be used as a slide hammer for dent pulling and gear pulling duty. Includes usage instructions and photos. Also includes carry case.

INCLUDE1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch 127 mm internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case.. HIGH QUALITY Sliding Hammer Puller Kits are made from forged steel pullers and fully hardened shafts and fittings, constructed from strong carbon steel alloy and chrome vanadium steel components, durable enough to withstand professional operation.. Perfect Jaw Configuration Includes 2-jaw and 3-jaw pullers for internal and external work to provide multiple combinations for pulling bearings, gears and seals. 2-way and 3-way cross slides and tapered pullers provide the perfect jaw configuration for most jobs.. ADAPTABLE 9-way slide hammer puller set with 4.8 lb slide hammer is suitable for a variety of pulling applications including flanged rear axles, most front wheel drive hubs, pulling indents and bearings, bushings, gears , pulleys, etc.. AFTER-SALES SERVICEIf the product has any quality problems, We provide free returnexchange service. you could contact our customer service, we will give you an exact answer within 24h..

The Gearwrench Hammer Puller Set provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. 5-12 lb slide hammer has a 58-18 thread. Yoke fits axles with 4, 5, or 6 Studs in a circle from 4-12 To 5-12. Pulls rear axle on cars and 12-ton trucks with flange-type axles. Durable blow mold storage case for tool retention and portability.

Remove CV Axle Joints Effortlessly Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, and use the ABN 2 Piece Axle Popper Forks Ball Joint Press Kit to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles. Fits your Needs Solid steel fork design has a 2-inch 5.1cm opening space to fit around your CV axle shaft Both the wedged and the shim split ends have a 12-inch 1.3cm width and a 2.5-inch 6.4cm length Popper wedge starts at a depth of 14-inch to fit into tight spaces when working. Safe for your Vehicle Forked ends allow you to apply even pressure to both sides of the axle shaft to ensure a safe release unlike pry bars and slide hammers Two piece CV axle popper tool kit ensures fitment for most FWD vehicles. Easy to Use Insert the wedge wheel bearing tool between the transaxle case and the axle joint with the forked ends surrounding the shaft Strike the end of the fork to release the half shaft Use the shim popper to fill in larger gaps found on some vehicles. Built to Last Package includes a 14 inch long 35.6cm wedged CV axle fork and a 14 inch long 35.6cm sham spacer fork Constructed of drop-forged steel with a metallic finish, these CV joint puller ball joint tools provide maximum strength and durability.