Top 6 Best Battery Clock Works

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.. Parameter I Shaft,drive long clock hands 10 mm to 450 mm Total shaft length is 18 mm 4564 inch, thread length is 5 mm 1364 inch,suitable for 1-3 mm 364 - 764 inch thickness clock panel.. DIY clock supplies the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.. Package contents 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them..

PACKAGED WITH CARE Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. CHOOSE THE SUITABLE MECHANISM this kit fit clock dials from 18 in - 14 in thick and is perfect for clock hands under 8 14 in long, making you smile of the memories your old clock gives you. DECORATIVE CLOCK HANDS Ornate sets for different options, perfect for your clock creations get to pick out the style and length of the hands that look best with your clock at no additional charge. ACCURATE TIME-KEEPING QUIET MOTOR features EMOON high precision clock mechanism, which offers watchmaker's accuracy and dependability equipped with sweeping motion, no ticking powered by a AA battery. KEEP TIME IN STYLE With EMOON clock hands and mechanism combo, you too can be a clockmaker perfect for clock replacement, repairing all kinds of clocks, or making your own customized clock project.

Warranty If the product has any problems with the clock mechanism, you can get a free replacement WITHOUT a return. Note The produces the 12888 series clock kits with different models, please compare the detail dimensions between your old one and this one before order.. Size Total shaft length is 18mm 0.71, thread length is 6.5mm 0.26and the shaft can drive long clock hands 10mm to 450mm. This clock movement cannot install the second hand. Usage This high torque clock parts kit is suitable for 1-4mm 0.04-0.16thickness clock dial.. What You Get The wall clock kit comes with metal hook and a small bag, which you can keep for other usage.Without clock hands.

Good for repairing, replacing or making a clock.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.. Material ABS. Size About 5.6 x 5.6 x 1.6cm2.2 x 2.2 x 0.6inch.. For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock.. Made of material, it is durable and long lasting use. Powered by 1 AA batterynot included.. Note this clock doesn't contain hook, they can't hang directly..

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.. Youngtown manufactures the 12888 series in various models,they have different shaft lengths and shaft diameters.Makesure the existing shaft and threads before ordering and you will get the right replacement.. Movement total shaft length is 23.5mm 5964 Inch,thread length is 16mm 58 Inch.suitable for 9-13 mm 2364 - 12 inch thickness clock panel.. Package contents 2 clock movements,3 Second hand,4 Minute hand,4 Hour hand,2 rubber gaskets,2 Brass washer,2 Second heads and 6 metal hooks,come with the specially designed protect box and instructions.. Good DIY clock supply suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself..

Size About 5.6 x 5.6 x 1.5cm2.2 x 2.2 x 0.6inch. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. Please Note Please measure the shaft of you clock mechanism you need before buying . Diameter The Minute Shaft Diameter is 3.6-3.7mm, and the Hour Shaft Diameter is 5.5mm. Screw Shaft Diameter 7.6mm.. For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock. The error is less than -1.5 secondsday, and the power consumption is less than 200 microamps.. Powered by 1 AA batteryNot Included, You can use No.5 AA batteries, carbon batteries, alkaline batteries. Cannot Use Rechargeable Batteries.. IMPORTANT This model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be tightened and the clock cannot run Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual one. Thank you for your understanding.

High Torque, Accurate Time Keeping Silent 2 Pieces CE RoHS Certified clock movements are included. Accurate and dependable when in motion, and the second hand spins without any ticking. Reducing Noise, provide a comfortable environment to sleep, work or study.. Broad Applicability and Styles 4 different style size clock hands are included. An appropriate style size set can fit for many clocks. All sets are good for replacement, repair and making of clocks. This clock movement parts are used in table clocks and wall clocks.. Easy to Assemble The total length of the shaft of this clock Movement is 710in 17.5mm, with a thread length of 25in 10.5mm that allows a clock face up to 310in 7.5 mm thick. It can be used in a clock dial diameter from 4-13in to 9-67in by different clock hands set.. Shockproof Box Package All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping. Good ideal for a gift.. What You Get 2 non ticking clock mechanisms and 4 pack clock hands. Also included 2 wall nails, 2 metal hooks, 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet. StFlyBro worry-free 36-month warranty and Friendly Customer Service.. Kindly Note Please check the Size of Clock Dial Thickness and Diameter carefully..

Quartz Movement Replacement Package including a clock movement, 2 x Second hand, 2 x Minute hand, 2 x Hour hand, a Plastic washer, a Brass washer and a Brass nut, come with the specially designed protect box and instructions. Clock hand size Second hand about 130mm,150mm. Minute hand about 100mm, 124mm. hour hands length about 76mm, 90mm. Battery Powered Clock Mechanism Insert a fresh AA battery not included and your clock will beginto keep time. The time can be set by turning the time-set knob on the back of the clock movement. Uesage Replacement Clock Mechanism for repairing, replacing or making a clock. Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc. 2 Pair Hand Quartz Clock Movement Two styles clock hands kit, easy for installation, simple and elegant design.

High Torque, Accurate Time Keeping Silent 2 Pieces Push-O O Shaft clock movement are included. They are accurate and dependable when in motion, and the second hand spins without any ticking. CE RoHS Certified clock motor. Non ticking clock movement battery operated, reducing noise, give you a comfortable time to sleep, work or study.. Broad Applicability and Styles 5 different style size clock hands are included. An appropriate style size set can fit for many clocks. Also, there are more options to decorate the clock face. All sets are good for replacement, repair and making of many clocks. This clock movement parts are used in table clock, wall clock, craft clock, cross-stitch clock, three-dimensional embroidery clock and frame-less draw clock, etc. It will help you to be a skilled clock maker.. Easy to Assemble StFlyBro clock mechanism and hands combo provide many parts to easily repair, replace and make a clock. The total length of the shaft of this clock motor is approx. 710in 17.5mm, with a thread length of 25in 10.5mm that allows a clock face up to 310in 7.5 mm thick. It can be used in a clock dial diameter from 7 78in 20cm to 14in 35.5cm by different clock hands set.. Shockproof Box Package All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping. Package include 2 non ticking clock mechanisms and 5 pack clock hands. Also included 2 wall nails, 2 metal hooks, 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet.. Life Time Friendly Customer Service If you are not satisfied with an item from StFlyBro, please send us a message with no hesitation. We will response you within 24 hours, and give you a satisfied service..

Package includes you will get 3 clock movements, 3 sets of accessories, 3 wall clock hooks, 3 wall nails and 6 sets of different pointer kits, you can choose various styles according to your needs The replacement parts are suitable for maintenance, you can also change or make your own clocks Please note that the back is silver, and the front is as shown in the picture. Appropriate dimension the total length of the shaft is approximately 18 mm 0.7 inches, and the thread length is approximately 11 mm 0.43 inches, the clock movement mechanism is suitable for clock panels with a thickness of 1 - 3 mm 0.04 - 0.12 inches, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit. Quality material the movement is made of ABS material, and the clock hands are made of quality aluminum, which are lightweight and corrosion-resistant, they are strong and durable, and can be applied for a long time, providing you with a nice usage experience and decorative effect. Work effectively powered by AA batteries, the quartz DIY wall clock mobile mechanism has nice precision, which can provide the watchmaker with accuracy and reliability, will not produce annoying ticking sound, moreover, will provide you with a quiet environment. Multiple applications these clock movement mechanism parts are suitable for cross-stitch, 3-dimensional embroidery, craft clocks, frameless wall clocks, etc., they fit for replacing DIY quartz wall clocks very well, there is no doubt that they will bring a lot of convenience to your life.