Top 6 Best Bme280

BME280 is a precision sensor, is soldered onto PCB.. Not only the pressure and the temperature, this sensor can measure humidity.. It uses both I2C and SPI supports 3-, 4-wire SPI interface.. With an I2C connection you have access to enough weather data to make some pretty good predictions for your local area.. It is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..

1.This Kit contains with 3pcs of digital sensor module, which can be independently enabled disabled, which can measure not only the temperature humidity, but also the pressure.. 2.The BME280 sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.. 3.Our BME280 Sensor is the best low-cost, precision sensing solution for measuring barometric pressure with 1 hPa absolute accuraccy, and temperature with 1.0C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with 1 meter accuracy.. 4.Organizer BME280 Atmospheric Pressure Sensor Temperature Humidity Sensor Breakout for Arduino. 5.Package 2pcs BME280 Atmospheric Pressure Sensor Temperature Humidity Sensor Breakout.

Supply voltage VDD main supply voltage range 1.71 V to 3.6 V. Interface I2C up to 3.4MHz, SPI up to 10 MHz. Temperature -40 to 85C. Humidity 0-100. Pressure 300-1100 hPa.

Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI supports 3-, 4-wire SPI interface.

This Kit contains with 3pcs of digital sensor module, which can be independently enabled disabled, which can measure not only the temperature humidity, but also the pressure.. The BME280 sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.. Our BME280 Sensor is the best low-cost, precision sensing solution for measuring barometric pressure with 1 hPa absolute accuraccy, and temperature with 1.0C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with 1 meter accuracy.. BME280 Atmospheric Pressure Sensor Temperature Humidity Sensor Breakout for Arduino. Package 4pcs BME280 Atmospheric Pressure Sensor Temperature Humidity Sensor Breakout.

Supply Voltage 1.8 - 5V DC. Interface I2C up to 3.4MHz, SPI up to 10 MHz. BME280 5V barometric pressure digital sensor, is a new chip which was originally designed for the next generation of smartphones. BME280 is the precision sensor, is soldered onto PCB. It uses both I2C and SPI supports 3-, 4-wire SPI interface.

A tiny sensor breakout with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V5V voltage levels. Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental Sensor is suited for applications such as environment monitoring, weather forecast, altimeter, and IoT projects, and so on.. Supports I2C default, configurable slave address. Supports SPI, switch to SPI via IO setting.. Temperature sensing -4085C resolution 0.01C, accuracy 1C. Humidity sensing 0100RH resolution 0.008RH, accuracy 3RH, response time 1s, delay 2RH. Barometric pressure sensing 3001100 hPa resolution 0.18Pa, accuracy 1hPa.. Power consumption 0.1mA1Hz H,P,T. Dimension 27mm x 20mm. Mounting hole size 2.0mm.. Onboard voltage level translator, compatible with 3.3V5V operating voltage. Comes with development resources and manual examples for Raspberry PiArduinoSTM32..

3kinds of module you can choose. there are 2 type voltage 3.3V and 5V.

Not only the pressure and the temperature, this sensor can measure humidity.. Make sure to put SDO to high to get address 0x77. This will work with Adafruit BME280 library perfectly.. BME280 is a precision sensor, is soldered onto PCB. It uses both I2C and SPI supports 3-, 4-wire SPI interface.. With an I2C connection you have access to enough weather data to make some pretty good predictions for your local area.. It is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..