Top 6 Best Boring Bar

Package includes you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace. Quality material lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel The cemented carbide material makes the turning tool durable and adaptable Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable. Suitable size the diameter of the S07K S08K S10K handle is 4.92 inches 125 mm, S12M-SCLCR06 is 5.9 inches 150 mm cutting angle is 95 degree, cutting direction is right hand Applicable machine tool is lathe Each tool holder has a black oxidized smooth surface, and the tool hardness HRC up and down 48 degrees and has nice accuracy. Easy to store insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders Tight impact bolts, simple structure, often applied for small hole processing. Note due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm Due to the difference between different monitors, the picture may not reflect the actual color of the item.

package 1pc S20R-MWLNR08 boring bar 10pcs WNMG432 carbide insert 1pc wrench.. S20R-MWLNR08 turning boring bar the cutting directionright hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use.. WNMG432 carbide insert inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .. The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..

Sclcr Boring Bar 12 Shank Diameter,Overall Length 7. Insert Material made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance. Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine. CCMT09t304CCMT32.5 Carbide Inserts 80 degree,negative 5 degree end side cutting angle. Packing1 pc 12'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304CCMT32.5.

PACKAGE INCLUDES 5pcs lathe turning tools S12M-SCLCR06 S10K-SCLCR06 S08K-SCLCR06 S07K-SCLCR06 S06K-SCLCR06 5PCS CCMT21.51 ISO CCMT060204 carbide inserts 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box.. 5PCS BORING BAR The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining.. Lead cutting angle 95 Degree, cutting direction right hand, turning insert CCMT21.51 ISO CCMT060204 , clear mark on the wrench, easy to identify bar holder.. 5PCS CCMT21.51 INDEXABLE INSERTS inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron.. ADVANTAGE the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51CCMT060204,you can search for ASIN B09495PCR6.

2 Boring Head With R8 Shank.Head size 2.Boring bar Hole 12. Cross Hole Dia 12.Maximum Offset 58.Thread 1.5-18.Graduations 0.0010-50. Center Distance bt 2 bottom hole 0.60. A micrometer lead screw provides 0.0001 direct reading accuracy and ease of adjusting. Packing including1pcs 2 Boring Head, 1pcs R8 Shank, 9pcs 12 Carbide Boring Bar,3pcs Allen Wrench.

OSCARBIDE Boring Bar Set ,1-14to 2-12Boring Depth ,716 to 12Min Bore ,1-34 to 4 Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use. Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips. Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post. Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine. Replacement insert for this kit ,please search the Asin of this item B07Q2HNGVF to buy it.

Material DCMT21.51 carbide Inserts with CVD coating ,55 degree diamond turning inserts used for machining stainless steel and steel parts. About the Internal Boring bars 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove. Advantage Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials. Application The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials.. Package includes 3pcs Turning Boring Bars S08K-SDUCR07 S10K-SDUCR07 S12M-SDUCR07 10pcs DCMT070204 Gold Carbide inserts 3PCS T8 Wrenches.

Style No. BD-7 Bar Diameter 34. Bar Length 12 Bit Size 14. Bit Type Square. Tool bits not included One End 90 degrees AND One End 45 degrees. Bit Type Square.

Sclcr Boring Bar 34 Shank Diameter, Overall Length 10. Insert Material made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance. Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine. CCMT09t304CCMT32.5 Carbide Inserts 80 degree,negative 5 degree end side cutting angle. Packing1 pc 34'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304CCMT32.5.

Quality material - Lathe boring bar turning tools holder indexable carbide insert blades are made of quality cemented carbide and tungsten steel, the blade is sturdy, low friction coefficient, wear-proof and stable. Easy to Use - Boring bar tool holder is 95 degree cutting angle, cutting direction is right hand, much suitable for lathe turning tools. Widely Apply - Lathe boring bar often used for turning and finishing for steel, cast iron and non-ferrous materials. Simple structure, tight impact bolts, often used for small hole machining. Package Includes - 5 pieces boring barS06K-SCLCR06, S07K-SCLCR06, S08K-SCLCR06, S10K-SCLCR06 and S12M-SCLCR06 10 pieces CCMT0602 indexable carbide insert cutters 5 pieces T8 wrench. After-sale Service - 100 satisfaction, free exchange or return for any dissatisfaction.