Top 6 Best Cable Line Tester

Loud Tone Identifies the correct line that is connected. Red LED Light indicates if the wire fails,' such as a Splitter, DC Short, Bad Coax, or other Self Grounding Device in line. Uses 12 Volt Battery included to go significantly farther about 5,000 feet than similar testers. Includes Pocket Toner Right Angle Sender and Toner Pieces, Battery, and Barrel Connector. Strong, Durable Metal Construction Quick Connect right angle adapter.

Cable Performance testing up to 10GBASE-T via frequency-based measurements. Network features including IPv4 and v6 ping, nearest switch diagnostics IP address, name, port VLAN number, and advertised data rates. Ethernet Alliance certified PoE Verification Detects the PoE class 1-8 and power, and performs a load test of available PoE from the connected switch. Displays cable length, wire map, and distance to open or short . Manage results and print reports from LinkWare PC .

Qualifies cabling performance for 10100Gig Ethernet, tests and troubleshoots all copper media cabling Twisted pair Category 5 6A, coax, and audio. Includes CableIQ Qualification Tester with detachable wire map adapter, 2 RJ45RJ 45 patch cord, USB cable, coax 'F' push on adapter, user guide, 4 AA batteries, soft carry case, 1 year warranty. Advanced troubleshooting features Length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet POE detection. Works on live networks to provide Ethernet switch detection and device configuration. Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe included with CIQ KIT.

Includes 1 Coax Cable Tester also known as Mapper or Tracker, and 4 Unit Locators. Perfect For Allows CATV, Satellite and security installers to test multi- run coax Cable applications terminated with BNC, RCA, or F connectors and has the ability to put a tone signal on a coax cable. Features Bright LED, tone generator, and automatically powers down. Easy to Use Features an LED display for readability, 4 color coded ID finders to locate and identify cables, and it displays pass when no failures are indicated for each remote. Quality Assurance This coax Cable mapper toner features a durable, professional quality design and Includes a US manufacturers warranty.

Cable tester tests voice RJ1112, data RJ45 and video coax F-connector terminated cables with clearly defined results. Measure cable length up to 2000 feet 610 m. Test for Open, Short, Miswire or Split-Pair faults. Backlit LCD screen displays cable length, wiremap, cable ID and test results. Trace cables, wire pairs and individual conductor wires with multiple style tone generator requires analog probe Cat. No. VDV500-123 sold separately. Hub blink mode to identify port location on a hub or a switch. LanMap and CoaxMap Location Remotes 5 each map and ID multiple cable runs in a single step.

TEST TERMINATED CABLES CAT5e, CAT6 and CAT6A RJ45 and patch cords. LARGE BACKLIT LCD for low lit areas displays pin to pin wiremap results. VERSATILE test for open, short, miswire or split-pair faults, cross-over and shield. EASY-TO-IDENTIFY test responses, intuitive and simple three button feature. TONE on single wire, wire pair or all 8 conductor wires.

Detecting cables, electrical lines-watergas supply pipelines buried in wall or earth. Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth. Detecting fuses and assigning current circuits.. Both transmitter and receiver display power level, code, battery, detected voltage type and value, and high-voltage alert.. Transmitter built in DCAC voltage meter for linear measurement of 12-400V DCAC voltage.

Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs. Visible LED status display.. Cable state testing 2-wire Line DC detecting, anode and cathode determination,Ringing signal detecting open, short and cross circuit testing. Cable Type RJ11 Telephone cable and RJ45 LAN cable. Connectors Ethernet Cat 5, Ethernet Cat 5e, Ethernet Cat 6, Ethernet Cat 7, RJ11 6P and RJ45 8P. Power Source DC9V Battery Required not included.

Cable tester locates, tests and measures coaxial, data RJ45 and telephone RJ11 cables. Identify wiring faults including miswire, open fault, short fault, split-pair, wire map. Detect, identify and test Power over Ethernet PoE. Measure cable length and distance-to-fault with Time Domain Reflectometry TDR technology. Four tone options with probe included. Measure paired-conductor cables up to 1500-Foot 457 m with accuracy of up to -5-Percent and 1-Foot0.3 m. Single-end cable testing or complete two-end cable testing with Test-n-Map ID Remote.

Includes a professional grade analog tone generator and tracing probe for open-ended, non-energized wiring. Toner-Pro features 5 distinct tone cadences, transmits 1,000 feet. Rugged Angled Bed of Nails ABN clips securely attach to wires. RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair. Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs. Probe-Pro features 3.5 mm headphone jack for noisy environments headphones not included. Responsive probe with durable non-metallic, replaceable conductive tip VDV999-068 - sold separately.