Click here to learn more about these products.
Anderson Metals - 50069-0606 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" Tube OD x 3/8" NPT Male Pipe
Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.. Included components 1 brass elbow with 1 nut and 1 sleeve attached. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Yoebor Stainless Steel 304 Compression Tube Fitting 90 Degree Elbow 3/8" OD x 3/8" OD, Pack of 2
90-degree elbow for connecting tubing to threaded pipe at an angle. Working Pressure 2900psi 20MPaTemperature Range -50-450 -58 -842. Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications.. Applicable medium oil, water, gas and other non-corrosive or corrosive medium.
Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2" x 1/2" Tube OD
Three piece construction - nut, sleeve and body.. USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe.. Standard fittings use short nuts. Easy to disassemble no flaring tool required - See chart for Assembly instructions.. Primary uses water, gasoline, oil and vacuum lines. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Raindrip 368G00UB Compression Elbows, Loose, 5/8-Inch, Black
Adds a 90-degree turn in your 58 in. supply tubing or dripline Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system. Fits 58 in. tubing and dripline with outside diameter of 0.700 in.. Creates a watertight connection has an internal barb that compresses the inserted tubing to hold it in place unlike a barbed fitting, the tubing is not stretched out to connect to the fitting. Compression ring is color-coded for easy identification blue fits 0.710 in. tubing with 0.710 in. OD black fits 58 in. tubing with 0.700 in. OD green fits in. tubing with 0.620 in. OD Handles water pressures up to 50 psi. Comes with one 58 in. Compression Elbow.
Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" x 1/4" Tube OD
Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Anderson Metals 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" x 3/8" Tube OD,50065-06
90-degree elbow for connecting two tubes at an angle. Female compression tube fitting for connecting to male threaded pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to 250 degrees F. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
LASCO 17-6557 5/8-Inch Compression Brass 90-Degree Ell/Elbow
Brass. Compression elbow. Carded. Elbow shape. Lead free brass construction. Lead free approved product in all states. Used with plastic and copper tubing. 58-Inch compression.
Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4" Tube OD Male Compression x 1/4" NPT Female Pipe Size
Three piece construction - nut, sleeve and body.. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. See Pipe Thread Chart to determine Female NPT Pipe size neede. 14 Female NPT Pipe Size has a 12 Thread OD. Male Compression Tube OD x Female Pipe. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Anderson Metals - 50065-10 Brass Tube Fitting, Elbow, 5/8" x 5/8" Compression
90-degree elbow for connecting two tubes at an angle. Compression connection on both ends. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to 250 degrees F. Three piece construction nut, sleeve and body. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Anderson Metals Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" Tube OD x 1/2" NPT Male Pipe, (50069-0608), Copper
Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Best Choice
Best Value
