Top 6 Best Cr-10 Hotend

All Metal Design, Up to 300 PrintingWith scientific structure and material selection, the Spider 3.0 Pro All Metal Hotend Upgrade Kit can reach 300 to accomplish better effect of printing with high temperature filaments. It is compatible with PLA, ABS, PETG, TPU, PP, PC, PEEK, PEI, Nylon and more filament.. Large Melting Zone, High-Flow PrintingThe overall melting zone length is 27.3mm, increased by 30 compared with spider hotend v1.0 and other common hotends, which offer a smooth printing experience even with 0.8mm nozzle. Meanwhile, the inner wall of nozzle and heat block adopt fluid polishing process, Ra0.25, greatly enhance fluidity of filament and prevent clogs.. Supporting 300mms High-Speed PrintingThe high-temp heat-resistant insulation sheet is added to maintain the temp of the melting zone, supporting 300mms high-speed printing.The titanium alloy screws were used to reduce the thermal conductivity by 30, which can reduce the transfer of heat from the hating zone to the heat dissipation zone and ensure the smooth feeding. Meanwhile, red copper heat sink to improve heat dissipation efficiency.. Easy to Install, Wide CompatibilitySmall and exquisite external size with modular standard interface design, easy to install. Directly compatible with Ender 3Ender 3 ProEnder 3 V2Ender 3 Max, no modification required. You can find the their high-temperature firmware on Creality website. For Ender 5Ender 5 ProEnder5 PlusEnder2 ProCR 10SCR 10CR10 S5CR10 S4CR 10MiniCR 20 Pro, they require slight modification. PLEASE NOTE NOT COMPATIABLE WITH ENDER 3 NEOENDER3 V2 NEOENDER3 MAX NEO.. Product List Warranty PolicyThis kit comes with a Spider hotend, a thermistor, a copper tube, a thermal grease, an adaptor, silicone sock, wrenches and screws. We provide price protection service, within 15 days of your purchase, if you find the price has dropped, you can apply to make up the difference. During use, if you have any question, please contact us and we weill reply you within 24 hours..

It's 100 Creality Original.. Upgrade with Low Friction Capricorn Original PTFE Tubing 63CM.. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.. Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality..

Creality CR10 Extruder,100 ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS ACCESSORIES AND WITH HIGH QUALITY. MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY STANIESS STEELBRASS. CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE. MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W.. TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE BUILT-IN TEFLON.

Easy to Install Easy for the CR10 hotend to Assemble, packed whole extruder kit, just fix it on X axis and connect to control box, it will work.. Fluent Printing Without String Independently developed brass nozzle has bullet structure, which improves uniform heating to reduce clogging and string.. Fast Heating and Heat Dissipation Heating block heatsink fan, fficient heating and heat dissipation, greatly improved printing success rate. Fan cooling applied, even heat dissipation, more stable printing.. Applicable Models This 12V full hotend kit is compatible with CR 10CR 10 MiniCR 10SCR 10 S4CR 10 S5 FDM 3d printers.. Thermistor and Heating Tube High quality thermistor and heating tube are up to 260,with rapid-risen temperature, precise temperature control and good stability..

Work with different sizes of MK8 nozzle 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle. MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W. 100 original and high quality 3D Printer accessories for CR-10 CR-10S S4 S5. Tip of the nozzle, aluminum heating block, throat pipe built-in Teflon. CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence..

100 Creality Official Spider 3.0 Hotend Kit is All Metal design which can reach 300 to accomplish better effect of printing with high temperature filaments. It is compatible with PLA, ABS, PETG, TPU, PP, PC, PEEK, PEI, Nylon and more filament.. Support High Flow and 300mms High Speed Printing The overall melting zone is increased by 30, the length is 27.3mm, which offer a smooth printing experience even with 0.8mm Nozzle. Whats more, the high-temperature heat-resistant insulation sheet is added to maintain the temperature of the melting zone, this upgrade all metal hotend kit supports 300mms high speed printing.. Simple Installation, No Modification RequiredWith modular standard interface design and universal standard nozzle, this Spider High Temperature and High Flow Upgrade Hotend Kit is a drop-in All Metal Hot end Conversion Kit. As a direct replacement for the stock hardware , installation requires no additional parts or modifications to use.. Wide Compatibility DelicateSpider Hotend 3.0 Pro compatible with Creality Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 5 Plus, CR 10 series and CR-20 series 3D Printer.. Creality 3D Official StoreWe are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 247 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a questiondirectly to get the professional assistance..

High precision this 3D printer hotend kit adopts a quality cooling system, the aluminum shell anodized frosted surface makes it more sturdy and wear resistant, which can serve you for a long time And the integrated structure allows you to disassemble, repair and assemble it easily. Reliable quality made of quality metal materials, this metal hotend kit is safe and reliable, which can withstand higher temperatures, allowing you to print filaments with high temperature requirements at will after replacement, such as ABS, nylon, polycarbonate and more. Consistent output following the manufacturing standards, this metal hotend can effectively reduce the risks of clogging and uneven extrusion, providing consistent outputs and avoiding frequent replacement of PTFE tubes, thereby reducing maintenance workload. Universal compatibility this 3D assembled metal hotend kit is compatible with most series of Creality Ender and CR printers And it is preassembled, which makes it easy for you to install. Note the metal hotend extruder kit does not contain heating elements, but we do reserve installation positions for the heating elements, so you can configure heating elements with different powers according to your actual needs.

Easy for the CR-10 hotend to Assemble Packed whole extruder kit, just fix it on X axis and connect to control box, it will work.. 2 Durable Quality plug and play cr-10 hotend assembly with high quality.. 3 Fit for Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers. 4 Stable Material Aluminum, stainless steel, brass and MK8 nozzle. 5 Extruder kit cr-10 hotend with thermistor, heater carriage, and two cooling fans..

Fits Creality CR-10 CR-10S CR-10-S5 CR-10 MINI CR-10-S4 Ender 2 Ender 3 Ender 3 Pro Ender 5 TronXY X5S. Nozzle size 0.4mm. Kit Includes Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock. This is a Drop in All Metal Conversion Kit for Creality printers. Made in USA by Micro Swiss.

Upgraded Melting Cavity to achieve High TemperatureHigh Speed High Flow printingThe overall melting zone is increased by 30 the size of the melting cavity is 27.3mm, and a high-temperature heat-resistant insulation sheet is added to maintain the temperature of the melting cavity and support high-temperature printing at 300C.. All metal designFixed with titanium alloy screws, the thermal conductivity is reduced by 30, and the transfer of the temperature from the heating area to the heat dissipation area is reduced.The heat dissipation part adopts a split design to reduce heat transfer and improve heat dissipation efficiency.. Upgraded Part material for better printing effectThe throat pipe is tightly connected with titanium alloy and copper alloy, and the 0.2mm thin-walled thick throat pipe brings excellent thermal insulation performanceThe heating block and nozzle are made of copper alloy, and the inner wall roughness of the nozzle is Ra0.25which can improve thde print quality.. Standardized interface, no modification requiredPrecise and compact dimensions, modular standard interface design, with original thermistorready to use without modification. Easy installation and maintenance , suitable for Creality CR-10 CR-10S Ender-2 Ender-3 Ender-5 series models.. Compatible with more consumablesPLA, ABS, PETG, TPU, PP, PC, nylon, PEEK, PEI, etc., support 300mms high-speed printing, ensure smooth printing with 0.8mm nozzle Size 66x22x23mmWeight61g..