Top 6 Best Current Probes

The CP2100A Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually. Bandwidths up to 800KHz.. The split design makes the probe small and exquisite , easy to carry and use.. This CP2100A Current Probe can be powered by Oscilloscopes USB port and doesn't require any extra power supply.. It comes with a standard BNC interface, applicable to all BNC interface oscilloscopes. It also can be used with a multimeter after adding the suitable adapter.. Satisfaction Guarantee We offer a 1-year manufacturers warranty and lifetime customer support for this product..

Hantek amp clamp ACDC frequency range Up to 20 kHz. hantek cc65 Effective Measurement Range 20mA to 65A DC. The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO. Hantek CC-65 amp clamp is Friendly in use turn on, clamp it over a conductor, and get a reading. The current probe is with Output BNC connector.

Automatically measures volts ac and volts dc with precise digital resolution. Displays resistance to 1000. Easy and accurate OpenJaw current measurement. Optional holster attaches to a belt and neatly stows test leads. Can stay connected much longer than solenoid type tester.

Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit. A passive filter eliminates noise and ring on rapidly rising didt waveform, ensuring accurate screen displays. Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector. Can be used with Multimeters with optional PM9081001 BNCBanana adapter. 1 year warranty.

ACDC - 100 kHz. 50 mA to 100 A peak. For DMMs and Oscilloscopes. Output 10 mV A 100 mV A.. Max. Conductor Diameter 11.8 mm 0.46 in.. Termination BNC 1.. Max. Bare Wire Voltage 600 V CATIII.. Safety UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032.. Applications Motor Drives, Inverters, Power Supplies, and Avionics..

Current Range10mVA, 100mVA. DC Accuracy100mVA 3 50mA50mA to 10A peak range10mVA 4 50mA500mA to 40A peak range100mVA 15 maximum40A peak to 100A peak range. Frequency RangeDC to 300kHz -3dB. Accessories1 User's Guide1 dual-BNC coaxial cable1 BNC-to-banana plug adapter1 AC power adapter. Max. Conductor Size11mm.

Compatible with any Fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. Compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter. Designed to provide you with safe, high accuracy measurements for a wide range of applications. Specially designed built-in safety features such as the 600 V RMS rating at the input jaws, output cable and BNC connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems.

BandwidthDC 2.5MHz. Maximum measurable current100Apk70Arms. Overload indicationBuzzer beeps, Light flashes. Power supply USB DC 5V. Compatible with all BNC-connected oscilloscopes, adapters can also work with multimeters..

Great Performance Current Probe OWON current probe are very powerful tools for extending the current range of oscilloscope tools. Current tester clamp with very high performance support Auto zero at power on, relative zero correction, low battery indication, bandwidth up to 200KHz, low noise level, and high detection accuracy. Adopt of amorphous alloy core, it has the characteristics of high performance and low loss.. Various Test Range OWON CP024 current clamp is super suitable for automotive oscilloscope to measure currents between 1 mA and 400 A. The test range from 4A, 40A, 200A, 300-400A can meet your various measurement needs.. Easy to Use The current probe can set the range selection through the slide switch on the probe handle, which is very convenient in use. There is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. 23mm maximum jaw can meet daily testrequirements. Equipped with 9V battery compartment, easy to replace.. BNC interfacerOWON current probe multimeter has standard insulated BNC interface, common to all brands of oscilloscopes and can be plugged to use directly. After connected well, switch the current clamp on , power LED light, and then clamp the jaws around the current carrying conductor as shown. The ACDC Current Probe simply offers the best value for money without compromising resolution.. Package AccessoriesPurchase OWON Current probe you will get a very cost-effective value pack, including CP024 X 1, Battery X 1, Quick Guide X 1, Soft Bag X 1. CP024 DimensionWHD 180 x 68 x32mm. OWON is committed to providing more professional and high-performance products for electrical professionals, adding DC and AC current measurement functions to your digital oscilloscopes..

Powerful features Micsig CP2100B Bandwidths up to 2.5MHz, Maximum measurable current 100Apk, 70.7Arms DCACpk Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually.. Applies for Oscilloscope and Multimeter The CP2100 series is a current probe that can measure both DC and AC. Adopt standard BNC interface, applicable to oscilloscope with all BNC interfaces, and adapter can also be used for multimeter. USB Power Supply With USB power supply, clamp current probe can be directly connected to the oscilloscope USB. With the use of the oscilloscope, the measurement is more accurate and efficient. ACDC Current Probe This DC-AC current probe can be widely used in motor drive, power frequency, inverter, power supply and avionics. Convenient Carriage Current probe meter with the split design, the appearance is small and delicate, with carrying case, easy to carry, and the measurement is more safe.