Top 6 Best Cv Boot Spreader

FUNCTION This tool used to and install the CV joint protective boots with out driveshaft from vehicle or CV joint from drive shaft. Lubricate the boot and place it on the expander fingers to activate the air to expand and place on the joint and release.. WIDE APPLICATION Widely fit for Audi, for BMW, for Citroen, for Fiat, for GM, for Mercedes, for Mitsubishi, for Renault, for Seat, for Skoda, for Volvo, for VW.. PACKAGE INCLUDED 1 x CV Joint Boot Installation Tool.. SUPERIOR MATERIAL High quality steel and through strict quality inspection. You can buy it with confidence.. ATTENTION Before purchasing this item, please double check the product details information. If you can not make sure whether it can be used on your vehicles, feel free to contact us for help..

Supporting boot and clamps This universal fit CV boot air tool set provides a durable silicone universal fit CV boot and a pair of fixing clamps. Efficient tools The CV boot expanding tool makes changing the boot on CV Joint driveshaft pneumatic outer cage expander easier to save you a lot of time.It is not necessary to remove the drive shaft from the vehicle or the CV joint from the drive shaft. Reliable quality We pursue precision and durability,the cv boot repair kit is made of high-quality carbon steel and painted with good workmanship. Universal The cv axle removal tool is suitable for most types of cars,ATV,UTV,side by side vehicles.For Ford, Volkswagen, Toyota, Honda, Nissan, Geely and other brands. Opening range Maximum opening range of front pawl 20mm-110mm.

High Efficiency The installation tool help to change CV boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.. Easy to Operate Lubricating the boot and place it on the expander fingers to activate the air valve to expand and place on the joint and release.. Steel Material The CV joint boot removal tool is made of high strength steel and is durable and rust resistant, not easy to damage.. Universal Application The CV joint boot installation removal tool is universal, can be widely used for cars and light commercial vans.. Dimensions The CV joint boot removal tool size is about 17.32x5.51 inches 44x14cm Length x Width, helpful and practical tool..

CV Joint Boot Air Powered Installation Removal Tool. The CV Joint Boot Installation Tool can be replaced without removing the CV connector.. Fit for cars and light commercial vans.. Make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.. Size 4814cmLW.

Comprehesive Plier Clamp Set Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines.. Durable Corrosion-resistant nickel chromium steel Long-reach hose clamp pliers with 24-inch 61cm flexible wire cable shaft allows access to awkward angles Approximate 1.2 to 1.75-inch 3 to 4.4cm jaw openings swivel to access hose clamps in any position approximate 8-inch 20.3cm overall length. Comfortable Grip Molded, rubberized handles for less user fatigue and more productivity Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries. Package includes 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover.. Blow Mold Case The hose clamp pliers is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Universal stretch CV boot tool is made by plastic material, durable and practical to use. The fitting Cone Tool can be used reusable.. Smooth surface, It can protect the CV Boot Kit from he damage while it installation process.. Cars CV Boots, which is helpful to improve the work efficiency, save time and take it easily.. Widely applies to install the stretch CV dust cover CV joint drive shaft, which is very convenient.. The fitting Cone Tool can be used reusable..

Fits shaft size 19mm-24mm. - Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way. - Save Time and Money as compared to an axle replacement.. - Ideal for Preventative Maintenance that keeps the vehicle in its OE State.

1, Brand Advantage ----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots.. 2, With 8Pcs CV Boot Clamp ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle.. 3, With 2Pcs CV Joint Boot Clamp Pliers ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.. 4, Easy To Use ----- Wrap free-end clamps 38-inch or 14-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 12-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers.. 5, What You Get ----- In this kit, You will get 4Pcs Small CV Boot ClampsHeight 7mm, 4 Pcs Large CV Boot ClampsHeight 9mm, 2Pcs CV Joint Boot Clamp Pliers In total 10Pcs in a box, can meet all your different Daily needs..

The fitting Cone Tool can be used reusable.. Made of plastic , Durable and easy to use. It can improvely efficiency of install to CV Boot CV Joint driveshaft. Saving Time and take it easily.. It can protect the CV Boot Kit from the damage while it installed process.. Please check the Product Size is suitable to your demand before purchase it..