Top 6 Best Dante Audio

4-Channel XLR to Ethernet Adapters - Connect these two extender boxes with an Ethernet cable up to 300 ft. sold separately to carry up to 4 channels of XLR audio or 3-pin DMX control signals across stages, studios, DJ venues and live events over a single connection.. EtherCON-Compatible RJ45 Connectors - Lock the Ethernet connection in place during busy concerts and live events with EtherCON-compatible RJ45 connectors on each adapter box. Run an EtherCON-compatible Ethernet cable between the boxes up to 300 feet, and you can trust the boxes wont get detached when it matters most.. 4 Channels of Analog Audio, One Cable - Used together, these two adapters carry 4 analog XLR audio signals over one RJ45 network cable. Connect audio from mixers, microphones and instruments to the XLR ports, and run all 4 signals to the other adapter via shielded, balanced Ethernet cable sold separately.. 4 Separate DMX Control Signals - Control LED stage lights, DJ lights, fog machines and effects with up to 4 DMX signals over 3-pin XLR connectors. These adapters allow you to use up to 4 different lighting controllers to control separate lights, while minimizing long cable runs from the control room.. Carries Phantom Power for Mics and DI Boxes - Connect stereo DI boxes, groups of condenser mics and more over a single Ethernet cable to your preamps. These two adapters safely carry 48V phantom power over a compatible RJ45 network cable, so you can use phantom-powered studio or stage gear..

Ethernet Cable for Pro Audio and DMX Lights - 150 ft. shielded CAT6 Ethernet network cable with EtherCON-compatible RJ45 connectors for digital audio, analog audio and DMX control of stage lights, fog machines and effects. Made with premium materials for professional recording studios, DJs, live stages, touring bands and music venues.. Compatible with EtherCON - Featuring locking EtherCON-style connectors, 100 compatible with all EtherCON inputs and outputs. Common on pro audio devices, EtherCON connectors surround the RJ45 connector and lock it into place, much like an XLR connector, keeping the Ethernet cable firmly attached at both ends during busy live events, high-energy concerts and long studio sessions.. CAT6 Ethernet Speed - This shielded Ethernet cable meets the CAT6 specification for light-speed data transfer up to 10 Gbps. CAT6 has more stringent standards than CAT5, making this the ultimate networking cable for demanding digital audio standards like Dante and DMX signals that control hundreds of stage lights at once.. DMX or Analog Signals - When used with a GearIT extender, this Ethernet cable carries up to 4 DMX or XLR audio signals over a shielded, balanced connection. This setup is ideal for linking stage lights and audio equipment up to 10 feet across stages, DJ booths and studios.. Pro-Grade Construction - Manufactured to exacting standards with premium materials, this Ethernet network cable features 100 oxygen-free copper wire and aluminum shielding. It guarantees a protected, balanced connection, suitable for high-pressure studio environments and live situations with no margin for error..

TRS Stereo application. Fiberglass insulator ring. Textured No-Slip barrel. All Metal Construction. Full GLS Audio Guarantee.

GLS Audio G-Shell G45 are 100 Compatible with Neutrik Ethercon RJ45 Connectors Jacks. OFC Solid core conductors. Required to meet industry standard specifications for optimal signal transfer.. Ground lifted at one end to prevent unwanted noise and hum required by some electronics which don't support a common ground. GLS Audio G-Shell G45 Technology Allows Simple Twist of Shell to Remove from RJ45. Heavy Duty 100 Shielded Jacket with Internal Twisted Pitch Controlled Spacing TPCS Better Digital Transfer Longevity.

Two channels of balanced line level analog output. Adjustable signal level 18dBu 4dBu 0dBu 0dBV -10dBV through Dante Controller. Frequency Response 20Hz to 20kHz -0.5dB. Impedance 150 Ohm balanced, 75 Ohm unbalanced. Powered through Class 1 802.3af PoE Switch or injector.

For connecting analogue audio line level devices e.g. mixer to a Dante audio network. Adjustable signal level 2440 dBu, 0-10 dBV via Dante controller. Frequency range 20-20, 000 Hz. Impedance 20 k bal., 10 k unbal.. SN ratio 100 dB.THD 0.01.Sampling rates 44.14896 kHz, 24 bits.Connections 1 x RJ45, 2 x XLR inline jack.

One channel balanced line level analog input. Adjustable signal levels 24dBu 4dBu 0dBu 0dBV -10dBV through Dante Controller. Frequency Response 20Hz to 20kHz -0.5dB. Impedance 20k Ohm balanced, 10k Ohm unbalanced. Powered through Class 1 802.3af PoE Switch or injector.

Powered through Class 1 802.3af PoE Switch or injector or USB. Uses USB type A connector Can use USB-on-the-Go compliant adapter for mobile devices. Supports 48kHz sample rate. Class compliant audio device, does not require drivers for Windows, Mac, iOS or Android devices versions 6 or higher.

Stereo analog output device for Dante networks. Balanced XLR outputs for connection at mic or line level. Built-in headphone amplifier for personal monitoring. 24bit96kHz digital to analog conversion.

Robust digital audio distribution. Stereo analog output device for Dante networks. Balanced XLR outputs for connection at mic or line level. Built-in headphone amplifier for personal monitoring. 24bit96kHz digital to analog conversion.

Stereo analog input device for Dante networks. Connect instruments or line level sources. , RCA and 3.5mm stereo TRS inputs. 24bit96kHz analog to digital conversion.

Ideal interface to increase the number of microphones or AUX inputs.. 4 balanced line outputs can be used simultaneously, and all audio channels are used with Dante network.. 4 balanced MICAUX inputs, and also 4 outputs using phoenix connector.. CAT56 connector to link with Dante network and controlledby Audinate.. Small size integrated mounting bracket which can be installed in very limited space..

Wirelessly connect any PC or mobile device to your Dante audio network. Audio Channels 2 in, 1 out. Connectors RJ45. Sample Rates 48 kHz. Bit Depth 24.

12 CHANNEL XLR Fully passive, these all-analog rack mountable stage boxes can deliver up to 12 channels of audio and data. Each CAT Rack has 12 XLR ins or outs available in both male and female configurations as well as an etherCON input and parallel etherCON output allows for daisy-chaining. Great for stage production, studios, and touring.. REVERSIBLE RACK EARS Easily reverse the rack ears to change which way the rack is mounted by unscrewing the two screws on each side. screws and rack ears included. MODULAR The CAT Rack can be used as a stage box, splitter, and other various applications. Compatible with Analog, AES3, DMX, intercom signals and when using shielded CAT5e or better cable it allows for phantom power.. DURABLE Designed with high quality Neutrik connectors, machined anodized aluminum and stainless steel screws for ultimate durability. Fits in 1U rack slot..