Top 6 Best Dashboard Mounting Disk

Flush Phone Mount Safely and quickly secure a cell phone or GPS device to any firm and flat surface in your car, home or office for convenient one-handed use. Strong Magnetic Mount This cellphone mount comes with powerful Rare-Earth neodymium magnets which provide a secure grip to your devices and are 100 mobile device safe. Charging Cable Clip Secure your phone's charging cable to the Scosche Magic Mount The cradle-free design permits safe, easy one-handed use and access to screen, buttons, controls and ports. View Rotation The magnetic connection allows you to rotate your mounted Smartphone or GPS device seamlessly between portrait and landscape orientation in a snap. Dashboard Accessories Included - Flush mount, MagicPlate, protective film and user manual. Backed by Scosches Lifetime Tech Support and 3-Year Limited Warranty.. MagicPlate PLACEMENT Achieve the strongest magnetic hold with larger and heavier phones by placing the MagicPlate directly onto your phone or on the exterior of your phone case. For best results, wait 24 hours after applying the MagicPlate before using it with your car mount for phone. NOTE All devices must use the included plates, NOT compatible with MagSafe.

Upgrade 3M Sticky Tapes, To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.. 3M PE foam adhesive at the bottom can be fixed on textured surfaces.. Has a diameter of around 2.76 inches, applicable to most suction cup GPSmobile holders on the market.. No tools required for installation.. Buy with confidence as every APPS2Car product comes with life time customer service..

WIDE COMPATIBILITY Adhesive mounting disk fits any suction cup style or accessories mounting within 95mm in diameter suction cup for adhering to dashboards in the market. Our sticky disc is flexible option for carmount sticky pad replacement. MOUNTING WITH SMOOTH FLAT SURFACE Thanks for PVC plate and 3M VBH adhesive, upper part PVC plate provides smooth and flat surface while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface. NO MORE ADHESIVE SEPARATED The bottom grey color PE foam adhesive is enhanced version comparing with white adhesive in the market. It performs well even in hot and cold weather or climates.. SAFE JOURNEY After suction cup firmly attached with our sticky pad, you can enjoy navigation with smartphone or garmin GPS devices even camera securely on dashboard. No more dropping phone holders or garmin accessories for gps during driving.. 100 RISK-FREE PURCHASE At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art adhsive disc, we take all the right steps to make sure you get the finest. Were so confident that youll love our sticky pads that we offer a 100 Customer Satisfaction Warranty so that you know youre getting exactly what you pay for.

PREMIUM STICKY PAD When you want a dashboard car phone mount, maybe you are worried about the suction cup of your car mount, which is not stronger, maybe you also afraid that your car dash does not accept to the suction cup of the holder. Now, with the adhesive pad, you never worry about it anymore. Everything is perfect. SIZE The diameter 80 mm3.15 inches, TORRAS 2in1 car phone mount would be suitable for it very well. Also, if you have a smaller suction cup than this size, that still works perfectly.. PACKAGE 1 x sticky pad.. WHAT TO NOTE Please don't touch the adhesive with your finger. Select a certain place to install, then don't move again.. PROTECT YOUR CAR FROM DAMAGE If you frequently pick up the suction cup from the dashboard, it may damage your car as the time gone, but use the sticky pad, it protects your car from damage..

Premium Material Made of ABS plate and strong adhesive, durable and for long time use. Diameter 9.5cm 3.74 Inch. Upper part ABS plate provides smooth and flat surface. The bottom strong sticky PE foam adhesive fixed dashboard textured surface.. Wide Compatibility Could be applied to the smartphone mount, car camera, GPS suction mount and more. It performs perfect at any seasons. Heat-resistant and moisture-resistant. It could adhere to vertical surfaces, soft-touch dashboards and windshields.. Tips The adhesive mounting disk only works with any 95mm3.74 inch or smaller than 95mm3.74inch suction cup holder pedestal accessories.Please do not touch the adhesive with your finger. Select a ensure place to adhere and install, then do not move it again.. Easy to Install Ensure the contact surface clean and dry. Put the pad on the flat surface. Tear off the protective film on the base of the disk. Press it down hardly for 30 to 60 seconds, to gain the maximum adhesive between the disk pad and contact surface. Please wait for 24 hours to install the suction cup holder.. Packing List 2 x adhesive dashboard mount disc in 95mm diameter. No more worried the phone holders or GPS accessories dropping during driving. If you use the sticky pad, it could prevent you frequently pick up the suction cup from the dashboard while damaging your car as the time gone, and protects your car from damage..

Broad Compatibility Adhesive mounting disk 95mm fits any suction cup, work with various dashboard surfaces,windshields or windows, to solve the problem of suckers falling off. It provides a 3.74 circular glass-like flat surface for securing dash suction cup phone cradle, windshield cell phone holder, gps navigation ,receiver, car tablet stand, outdoor camera car mount,car decorations, wireless charger , shower wand suction cup holder,phone magnetic mounting system,grab bars,radar detector,ect.. 3M VHB Self-Adhesive These PVC plastic silicone plate with extra strong adhesive gel can hold up to high temperature120C. The stickiness of the powerful sticking discs is 40 higher than ordinary two sides sticky glue. The dash mount adapter plate with double-stick tape for car dash is heat proof and waterproof. No matter in hot summer or cold winter, you can use it without worry. Auto smartphone mounts glue pad suction pump base is firmly fixed in flat dash, windscreen and more.. Easy to Use The smooth heavy duty dash mounting pad comes with alcohol wipes. Using it to clean the selected dashboard surface before installing, after the surface is fully dry, peel off red adhesive film from the dash suction cup mount plate and attach the vacuum suction holder adaptorelectronics onto dashboard or windshield, please wait 24-48 HOURS then mount the appropriately sizes holder because non slip double sided adhesive foam tab cover needs some time to cure to the dash.. Important Tips Each dashboard sticky pad is one-time use only. It cannot be reused. Premium semi permanent sticky disk with dual side adhesive backed for suction cup phone mount needs to be installed on a relatively flat surface.You had better press it down for 60s ensuring better connecting. Don't touch the adhesive sticker with your hands. Please allow 24 hours for the adhesive bottom bases to cure to the surface before applying any pressure. The longer you wait, the better effect will be.. Packing List 3 x 3.74 inch 95mm in diameter round large dask disk pad, 4 x alcohol pads, 1 x user manual. VOLPORT chase to provide high-quality product and satisfactory after-sales service for buyers.Please do not hesitate to contact us if you have any questionswithin 12 months after you received your product and our customer service team is stand by 24 hours of the day to solve your problems.Your satisfaction is our top priority.Attachment covers plates design for suction cup installation..

Adhesive mounting disc works with any 70mm windshield suction mounting pedestals for adhering to dashboards. Compatible with Arkon GN079WDSBH, GN068WDSBH, GN022SBH, GN014SBH, GN015SBH, and GN042SBH mounting pedestals.

Premium Material Made of ABS plate and strong adhesive, durable and for long time use. Diameter 8cm 3.15 Inch. Upper part ABS plate provides smooth and flat surface. The bottom strong sticky PE foam adhesive fixed dashboard textured surface.. Wide Compatibility Could be applied to the smartphone mount, car camera, GPS suction mount and more. It performs perfect at any seasons. Heat-resistant and moisture-resistant. It could adhere to vertical surfaces, soft-touch dashboards and windshields.. Tips The adhesive mounting disk only works with any 80mm3.15 inch or smaller than 80mm3.15inch suction cup holder pedestal accessories.Please do not touch the adhesive with your finger. Select a ensure place to adhere and install, then do not move it again.. Easy to Install Ensure the contact surface clean and dry. Put the pad on the flat surface. Tear off the protective film on the base of the disk. Press it down hardly for 30 to 60 seconds, to gain the maximum adhesive between the disk pad and contact surface. Please wait for 24 hours to install the suction cup holder.. Packing List 4 x adhesive dashboard mount disc in 80mm diameter. No more worried the phone holders or GPS accessories dropping during driving. If you use the sticky pad, it could prevent you frequently pick up the suction cup from the dashboard while damaging your car as the time gone, and protects your car from damage..

WIDE COMPATIBILITY Removable foam adhesive mounting disk one side is suitable for all suction cup style, windshield triple tripod windscreen magnetic magic wireless charger mount suction cup base, electronics, electronic wireless charging, radar detector, tablet, ipad, bathroom shower headcaddy, rear view mirror, accessories in the market within 75mm 2.95 in diameter for adhering to dashboards. Our dash pad disc is flexible option for car mount sticky pad replacement. 3M HEAT RESISTANT ADHESIVE DISC Round rubber sticky mounting adaptercradlegrip plate disk is exclusively designed for cellphone suction cup cradles on the car dash. The large adhesive backing of the suction cup disk is made from high quality anti-heat glue gel. The sticking power is largely stronger than other adhesive on the market. Meanwhile it owns other two shining points-heatproof and waterproof. Glued pad is non-slip, but not reusable. It performs well even in high temperature days.. POWERFUL SUCTION POWER High bond suction mounted discs provide a window glass-like flat and smooth surface for pedestal of magnetic dashboard cell phone mounts to work more effectively. The plastic heavy duty outdoor silicone disk set with dual self-adhesive back pad can work with slightly curved, tile or uneven surfaces.Even you often pick up holder from the dashboard, it'll protect the dash and not damage your car as the time gone, it also can help prolong the life of your suction cup style.. PERFECT COMBINATION The parcel kit comes with 2 x 75mm2.95 black suction cup base pad, 2 x 70mm2.76 vhb circular double sided sticky adhesive tab. The extra strong double side adhesive backed stickers are flexible options for suction cup devices. Circle double-stick adhesive sticker tape can not only help secure sucker directly and also help you refix the dash pad disc firmly.Once suction cup stuck with our sticky pad, you can enjoy GPS, music, smartphone or even camera securely on dash.. NOTE 1.Each adhesive disc is disposable. Once removed, it can not be reused. 2. Fit for slight uneven surface. For best result, you'd better select a flat area to apply. 3. Please wait 24 hrs after installing. 4. Don't touch the glue gel with your fingers. 5. Most suction cup holders in the market are within the diameter 2.95, you can select it worry-free or confirm diam before purchase. 6.Whenever you have problem, please contact us immediately. We will be stand by 24 hrs of the day for you..

Universal Compatibility Dashboard sticky pad is designed for suction cup gel, to solve the problem of suckers falling off. Pop-Tech sticky mounting disk fits any style of suction cup device within 95mm in diameter. Such as dash suction cup mount, window cell phone cradle, GPS dash cam cupholder, tablet stand, magnetic car mount, wireless charger base, radar detector, car decoration toys, etc.. High Bond Heat Resistant Adhesive Suction cup mount plates are suitable for slight curved and textured surface of vehicle. Circle grey sticker is superior 3M VHB enhanced version, whose glutinosity is 40 stronger than transparent clear ones. Adhesive mounting disk can be firmly adhered to the automobile dash. Heat resistant stickers can securely lock auto phone holder at a high temperature of up to 120, to ensure dashboard adhesive discs perform perfectly outside temps in hot summer.. Easy to Use and Remove Several installation steps is easy to fix. Clean surface, affix disk, add weight, and wait 24 hrs. Alcohol pad is provided for your convenience. Upper part PVC plastic plate kit provides glass-like surface for pedestals of suction cups while bottom sticky foam adhesive for sticking on the dashboard textured surface Please press down for a while for tightness.. Note Each pad is One-Time use only, not reusable. Once attached, it may not be movable. Use a new disk if you want to transfer its location. For better adhesive holding, Wait for 24 hrs for 3M sticky adhesive dashboard pad mounting disk to cure to the surface before applying suction cup. Don't touch the adhesive with hands for better efffect. Please peel off the red backing cover paper slowly, or the paper will adhere with glue if you peel too fast, because the 3M glue is superb powerful.. Package Content Satisfactory Service 2 x 95mm 3.74 Round Dashboard Mounting Mat Disk, 4 x Alcohol Prep Wipes, 1 x User Manual. Pop-Tech select high quality material and we provides 12-month Satisfactory After-Sale Service and lifeproof technical support for buyers. Please do not hesitate to contact us if you have any questions and our customer service team is stand by 24 hours of the day to solve your problems. All we want is your satisfaction..

Nice adhesives made of ABS plate and strong adhesive, this disc dashboard pad can attach onto your car and your devices firmly, let your devices don't fly off as you go round corners,easy to use and remove without leaving trace. Suitable size dashboard mount disk pad measures 86 mm 3.4 inch in diameter, it can be widely applied to any suction cup accessories that are smaller than 80 mm 3.2 inch, flexible option for car mount sticky replacement Carefully check the size before buying. Installation steps make sure the target place that is ready to place is clean and dry, then remove the protective cover on the base of the disk, press the disk down onto the dashboard and press back and forth to increase tightness, you'd better let it for 24 hours to ensure a strong adhesive grip, finally place your suction cup onto it firmly. Compatibility suction cup mounting disc can be wide applied to smartphone mount, car camera, GPS suction mount and more, please noted the adhesive mounting disk works only with any 80 mm 3.2 inch or smaller than 80 mm 3.2 inch suction mounting pedestal. Practical gifts you will get 8 pieces adhesive dashboard mount disc in one set, sufficient quantity to meet you daily using and replacement needs, which are also thoughtful gifts for family and friends.