Top 6 Best Dewalt Planer Dw735 Helical Head

This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.. Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.. Helical insert knife configuration breaks up chips, making dust collection easier.. Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade comes with 5 replacement inserts.. Made in the USA.

Brand new 4 rows and 40 inserts. Outstanding finish compared to HSS straight knives. Chip out is nearly non-existent with spiral shearing action. Reduced noise. Improved dust collection. Extreme long life with 4-sided carbide insert knives that are easy to replace..

This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 62046202 are already installed on the cutterhead.. Reduced noise and tear-out, produce much smoother finish on difficult woods.. The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead.. The indexable inserts allows you to rotate it if one knife edge is dull or nicked.. Including tool kit 5 spare inserts 10 spare screws two T wrenches.

Helical spiral heads require less horsepower, make smaller chips and operate with far less noise than other types of cutterheads. Unlike conventional single straight knives, you do not need to replace the knife if it becomes damaged or dull. Instead, if one knife edge is damaged or needs sharpening simply turn it to another edge.. You will only need to replace the inserts when four edges are dull, giving you more life than steel knives.. When you compare to straight blade cutterheads - the cost of buying a second set of straight blades so you can get one set sharpened while the other is in the machine. You will need not to remove inserts from the cutterhead before installing on the machine.The two SKF bearings 62046202 are already installed on the cutterhead. Including tool kit 5 spare carbide inserts 10 spare screws two T wrenches , 2rows with 30 carbide cutters.

Cutterhead diameter is 0. 088 roughly 116 in smaller than the original OEM head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side 4 sides 40x than traditional steel knives. Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut slices the wood which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment.

Purchase includes one stationary 13 Planer, inout feed tables with fasteners attached to the base of the Planer base, extra blades and dust hose adapter. Stand is not included.. Three knife cutter head of the thickness planer delivers 30 longer knife life and makes knife change faster and easier. Two-speed gear box of the wood planer allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the machine. 19-34-inch cast aluminum base is 2 times more rigid than a standard 10-inch base and folding tables. Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user. Material removal gauge and extra large thickness scale deliver accurate cuts with every pass. Extra large turret depth-stop allows users to return to most frequently used thicknesses with ease. Includes infeed and outfeed tables and an extra set of knives.

SMOOTH CUTS Helical-style cutter head, with easy-to-change blades, provides a clean cuts.. REDUCED SNIPE Precision machined cast iron bed and steel cover assists in keeping boards flat.. POWERFUL MOTOR 2-HP 15-amp motor turns the cutter head at 10,000 RPM.. MAXIMUM EFFICIENCY Dual infeed speed control for either 18 fpm or 26 fpm, maximizes cut efficiency on different wood material types.. FOUR POST DESIGN For maximum control and support of cutter head in reference to work piece and cast table..

UPGRADED CUTTERHEAD-The TJATSE 13 Helical Cutterhead is designed to replace the straight knife cutterhead on the DeWalt DW735 and DW735X Planers. Takes the performance of your Dewalt planer to the next level and cuts smoothly through your wood planing projects with ease.. CUT IMPROVEMENT-Helical cutter head features smaller which contact the wood and an angle shearing the fibers rather than tearing at them, the cutting performance is excellent and the slight bit of snipe that was getting with the straight knives is completely gone, the wood surface would be so much smoother.. AMAZING NOISE REDUCTION-The biggest difference of helical cutterhead is the noise reduction, the section cutting process makes the wood chips very fine, then the chip removal is easier. Energy saving and power saving, while reducing tear out more effectively than conventional straight-knife cutterheads.. LONG-TERM COST SAVING-56 Indexable carbide inserts included to produce a superior finish. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost saving.. BRAND QUALITY WARRANTY-Package included 1 x 13 helical cutterhead 56 x carbide inserts 56 x screws, 1x screw driver, one-year warranty which assures the unit is free from factory defects. The TJATSE Customer Service and Technical Support Teams are all days online for help..

26 HSS Insert Cutters. featuring alternating cutter pattern and two-speed feed rate which produces a smoother cut surface. Part Number 25-135H.

Motor 2HP, 120V, single-phase, 15A. Maximum stock width 13 in.. Maximum stock thickness 6 in.. Maximum cutting depth 18 in.. Cutterhead type spiral-style with 26 inserts. Cutterhead speed 10,000 RPM. Feed rate 26 FPM. Table size with extensions 13 in. x 33-14 in.. Dust port size 4 in. with 2-12 in. adapter included. Carbide insert size 14mm x 14mm x 2mm.