Top 6 Best Drill Guide

The drill guide jig has 5 drill bushings and their diameters are 6mm,7mm,8mm,9mm,10mm0.24,0.28,0.32,0.35,0.39inch respectively.It is rather easy to change the bushing thread into the drill guide jig.. Centerlines ensure accurate alignment when drilling into various surfaces.By holding the drill guide body, easy to get vertical hole drilled without any deviation. The drill guide is made of premium aluminium alloy, it is of strong strength and long durability. The hole jig is a great tool set for both furniture factory and woodworking enthusiasts. Package include 1pcs Main Body Drill Guide ,5pcs Drill Bushings.

Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Attaches to all 38 And 12 Power drills and it also includes a 38 Capacity chuck with key. Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Adjustable depth stop and spring action control of the head.

Centerlines ensure accurate alignment when drilling into various surfaces. Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. Package dimensions3.05L x 5.33W x 14.48H.

17 drill sizes, from 18 to 38, in 164 increments. Use on flat surfaces, round parts, and corners. Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust. Alignment marks on guide to line up on center.

HIGH-QUALITY MATERIALS This drill guide for cable railing is made of high-quality industrial grade aluminum alloy, hard and lightweight, easy to use and carry. Anodized red surface, keep excellent finish, corrosion resistance and durability. The guide holes of this drill guide are inlaid with steel drill sleeves, so there is no need to worry about it being worn during drilling, causing the guide holes to become larger and lose accuracy.. THREE DRILLING ANGLES The drill guide has a drilling angle of 30 degrees, 45 degrees and 90 degrees. Suitable for 90 Degree horizontal deck post and 4530 degree angled stairs railing, the angle is fixed without deviation, you can quickly drill accurate 304590 degree angle holes with a handheld drill on the deck post, saving your working time.. FOUR SIZES OF DRILLING HOLES There are four sizes of guide holes for each drilling angle, which are 389.52mm, 5167.93mm, 146.35 mm, 3164.76mm, compatible with most cable railing lag screws. In order to drill the angle hole more accurately, please use a drill of the corresponding size.. SCOPE OF APPLICATION This drill guide can be used in conjunction with Locking C-Clamp and F clamp to prevent the drill guide from shaking when drilling, and the drilled holes are free of burrs and cracked. It is suitable for the installation of wooden, aluminum, and stainless steel deck posts for cable railings and DIY woodworking projects.. 90 DEGREE V-GROOVE N-SHAPED POSITIONING GROOVE 90 degree V-groove can be drilled at 90 degree corner and cylindrical surface. N-shaped positioning groove can be used to locate exactly where you want to drill..

THE ORIGINAL CABINET HARDWARE JIG - Accurately Install handles or knobs on virtually any cabinet door and drawer front. Eliminate tedious hand measuring or homemade templates and quickly install your cabinet pulls and knobs. Designed for professionals and DIYers alike to make your hardware installation fast, easy, and worry free.. PRECISION YOU NEED - 10x more precise than imitations, with proven results you can count on. Patent pending True Calibration system with Perfect Match laser engraved rulers. The most accurate cabinet hardware jig on the market.. FAST AND EASY TO USE - Simply tighten thumb screws in desired location on the jig, hold in place, and drill. Robust design does not require marking or clamps. Take the stress out of adding hardware to your cabinets with our fully adjustable and reversible drill template. Even install shelf pin holes and hinge plates with our versatile design.. AVOID COSTLY MISTAKES - Cabinets are an investment that need to be protected. This is why we use only the highest quality materials and proprietary machining, then hand calibrate every jig so that your knobs or pulls are placed exactly where you want them. While counterfeit jigs may look the same, they cannot mimic our extreme accuracy.. LIFETIME WARRANTY - Family-owned operated for 25 years, we build tools that stand up to the daily use of a professional and maintain the precision needed to ensure the job is done right. We offer a lifetime bushing warranty and free replacement for 60 days if the jig is not absolutely perfect. Proudly made in the USA.

For use with the Pool Fence DIY backyard pool safety system. Makes it easy to accurately and consistently drill required holes in concrete. Takes the guesswork out of the drilling process includes attached bubble level. Installation requires a rotary hammer drill with a standard 58-inch x 14-inch minimum masonry bit not included..

Includes 1 STD500NP, 1 STD1000DGNP, 1 STD2000DGNP 1 SDGMINI. Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust.. Centers the holes on pipes, dowels outside corners. Flat side allow 90 drilling into flat surfaces-just clamp and drill.. Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center.. Bottom surface is precision ground to ensure stability accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side.. Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case wsurface ridges to prevent opening, PegBoard-Friendly. Only shipping one of each V-Drill Guides NO other tools or ruler included.

Bundle Includes Kreg Pocket-Hole Jig 720PRO, 730 Pocket-Hole Jig Micro-Pocket Drill Guide Kit, and Pocket-Hole Screw Starter Kit. Helps Build Pocket-Hole Projects The Kreg Pocket-Hole Jig 720PRO helps build pocket-hole projects faster than ever. It is the latest innovation in pocket-hole joinery and a premium choice for project builders. Automaxx Clamping This jig was engineered to take your wood projects to the next level - with features like one-motion Automaxx clamping, which automatically clamps and sets the material thickness setting for pieces 12-inch to 1-12-inch thick. Docking Station It also includes the Kreg Docking Station, which transforms the Pocket-Hole Jig 720PRO into the ultimate benchtop workstation. Every element of this jig was crafted to maximize the work you do so you can get high-quality results.

STD1000DGNP V-DrillGuide 18-38 has 17 holes 164 increments SAE drill sizes 18, 964, 532, 1164, 316, 1364, 732, 1564, 14, 1764, 932, 1964, 516, 2164, 1132, 2364, 38. STD2000DGNP V-DrillGuide 38- has 9 holes, in 164 increment SAE drill sizes 38, 2564, 1332, 2764, 716, 2964, 1532, 3164, . Portable, pocket-sized Prevents drill bit wander Centers the holes on pipes, dowels outside corners. Round stock hole alignment marks on one side Special nickel alloyed steel heat-treated for durability. Non-plated material with light oil coating to prevent rust Non-glare finish withEasy-to-read markings American Engineered and Made in the USA.