Top 6 Best Drone Transmitter

Excellent Anti-interference DSSSFHSS communication technology and 7dBi high gain antenna make AT10II transmitter with stable transmission signal and the control range up to 2.5 miles4km in air. Responding latency as low as 3ms.. Features 12 channels, Fail-safe Setting, Battery Voltage Telemetry, RSSI, DualTriple Rates, End Point Adjustment, Switch Customized, Reverse Polarity Protection, Multiple Battery Compatible, Channels Mix Control, etc.. User Friendly Interface support basic menu and advance menu for different user needs. No need radio setting to bind transmitter with receivers.. Adapts to a Wide Range of Airplanes compatible with receiver R12DS, R12DSM, R9DS, R6DS, and R6DSM. 15 models storage and quicks to switch helicopter, quadcopter, fixed wing, glider, cars, BoxBot, and boats.. Safety Remind Signal Strength Indicator RSSI Alerts, low voltage alarm, failsafe protection. DD sounds and words alarming display on the 3.5 LCD screen to remind when you are in noisy surroundings..

Please note Flysky FS-i6x is default 6CH with fs-ia6b receiver. If you have 10 channels receiver fs-ia10b, that you can open to 10 channels.. Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support. Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels 32 for Japanese and Korean version in order to reduce interference from other transmitters.. Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection. Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..

Built-in TD 900M2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode Compatible with ACCST Receivers with D16 V2 or later FW 2.4G ACCESSMode Compatible with ACCESS Receivers 900M ACCESSMode Compatible with ACCESS R9 868915MHz Receivers Capable of simultaneous working under ACCESS mode 2.4G 900M TD Mode Compatible with TD Receivers. Super-low latency and long-range control with telemetry Up to 50 to 100KM range and down to 4ms end-to-end latency 800480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs. Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery USB Type-C Interface High-speed PARA Wireless Training System Compatible with FreeLink App3.0 Built-in Audio Wireless Module Compatible with Bluetooth Audio Device. All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45 to 60 stcik travel and 8 rotatable panel. ETHOS The more powerful, Flexible and Intuitive OS for your radio. Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display Touch and Non-Touch Supports Multi-Language Switching HardwareSoftware Version and Factory Version Detection Supports running LUA Scripts. Internal 900MHz2.4GHz Dual-Band External Module Bay The TD dual-band RF system combines both the features and advantages of FrSky 900MHz and 2.4GHz RF together in one system. The TD features real simultaneous dual-band long-range control with telemetry that achieves reliable end-to-end 4ms latency while maintaining a robust and high-quality signal link. The entire range of TD, ACCESS ACCST D16 receivers are supported. The built-in TANDEM RF System supports ACCESS and ACCST D16.

Offering superior protection against interference while maintaining lower power consumption and high reliable receiver senstivity.. Bidirectional Communication Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.. Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation.. The high efficiency Omni-directional high gain antenna cuts down o interference, while using less power and maintaining a strong reliable connection.. The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..

X9 Lite is ACCESS protocol. The receivers should be upgraded to ACCESS protocol to work properly.. Compatibility ACCST D16 and ACCESS receivers. Supports wired training function G7 Noble potentiometer gimbal. Supports spectrum analyzer function Haptic vibration alerts and voice speech outputs. High-speed module digital interface Easily accessible battery compartment Batteries not included, adaptive with replaceable 18650 button top Li-ion batteries.

1Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels 32 for Japanese and Korean version in order to reduce interference from other transmitters.. 2 Unique ID Recgnition System --- Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation.. 3 Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.. 4Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.. 5 Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..

Featuring an ergonomic design, large bright LCD screen in the perfect viewing position, travel adjustable HALL sensor gimbals, a nano size external RF module bay, built-in USB-C Charging, USB-C Data port for updating and playing simulators, rear and top assignable push buttons, scroll wheels, RadioMasters 7 button menu navigation system, headphone audio output, external power source input and a host of RF options the RadioMaster Zorro is set to change the game once again.. Support OpenTX EdgeTX Zorro officially supports OpenTX and EDGETX Firmware. External Module Bay Zorro Radio is with an external module bay for use with Crossfire ELRS and other compatible modules.. Switchable in Mode 1 and Mode 2 Zorro radio supports switching between Mode 1 and Mode 2 without disassembly. The default factory mode is Mode 2.. Supports USB-C Directing Charging External 2S Battery Power Supply.

LCD Screen 1.3 12864LCD, Less grainy, clear display and small sense of granularity. Foldable antenna can easy packing and adjust as you wish.. USB-C Internal Charging The Jumper T-Pro features built in USB-C charging, powered by 2pcs standard 18650 batteries, with a maximum battery life of 2s 3400mAh battery not included.. External NANO module bay supports ELRSCRSFTracer NANO Modules.c. Independent upgrade button. charging no longer loses firmware.. Audio Output low power-consumption Hi-Fi speakers, Minimum distortion, high quality sound..

The 2.4G AFHDS2A has stable signal, long remote control distance and multiple functions, which is popular with users. It is compatible with AFHDS2A series receivers.. FS-iA6B Output PWM 6CH PPM 8CH S.bus 10CH i.bus 10CHbr Select from transmitter menu 'SYSTEN-RX setup-Outprt mode'.Receiver is compatible with multiple RC aircraft and Car Boat connection modes.. Applicable to RC fixed-wing glider helicopter models. Can also support RC QuadcopterCarBoat, even if these icons are not in the menu.. Mix3 , Throttle hold , Alaohu Flysky FS-i6X Transmitter can store 20 groups of models.. Three 2-section switches and one 3-section switch, two knobs. LCD can display TX voltage value and RX voltage value. SigS1.Real-time understanding of model data. Ahulao FLYSKY FS-i6X RC Transmitter and Receiver FS-iA6B.

EXCELLENT ANTI-INTERFERENCE - Real pseudo-random algorithm FHSS communication technology makes T8S with stable signal and long-range control distance up to 1.3 miles2000m in the air.. KEY FEATURES - 8 ChannelsLow latencyDual RateLow Voltage AlarmSignal AlarmRSSIFail-safeEPA4 Programmable Mixing ControlWireless Training FunctionBuilt-in Battery, 5 Hours Standby TimeNo Limit Model Storage.. APP SETUPS - Easy to set up, just wirelessly connect with the iOSAndroid app or use a USB cableIncluded to connect T8S with the computer to set up, and support update firmware to get the latest function.. ERGONOMIC SHAPE - Make it closer to ergonomics and fit your hands more comfortably, the non-slip texture on the handle makes a firm grip, and throttle mode can be set, good for both teenagers and adults. Stick mode can be switched through the APP easily, supports ALL modes-Mode 1 to Mode 4.. INCLUDED R8EF RECEIVER - Press the side button for 1 second to bind once, no need to repeat binding next time. Small and portable RC remote and receiverTotal 5.0 ozs.. Default Radio for Radiolink A560 3D RC Airplane F121 Quadcopter Racing Drone. And T8S is compatible and perfect for most models in the market, such as Multirotor, Airplane, Robot, Boxing Robot, RC Tank, RC CarBoat, and more..