Top 6 Best Electric Strike Door Lock

Field-selectable for fail-safe or fail-secure operation. 2,200-lb 1000kg Jaw strength, Tested to 500,000 cycles. Complete mounting hardware included, Screw terminals for ease of wiring. This Eelectric Door Strike can be used to convert cylindrical lock sets into an electronic access controlled locking system. Attention Before placing order, please check the size of doors frame to avoid wrong purchase.

The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits. The remote communicates with the receiver, which can program up to 40 remotes, and it has a range of 164 feet.. An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.. The remote communicates with the receiver to let people in. 0510 seconds locking delay time adjustable, default is 5 seconds. The default function of the remote is momentary that when the power is on, the lock is locked and when you press the button on transmitter the lock will unlocked temporarily to open the door. The other function is toggle that the remote has is the ONOFF feature..

Fail secure, NO mode Locked when power is removed. This electric strikes with 4-2732 faceplates are designed for use with mortise or cylindrical type lockset with up to 34 latchbolt projection without deadbolt. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself. The electric strike must be positioned to accommodate offset mortise latches during installation. Designed for Metal Frame drill a hole, then install it directly. Attention Before placing order, please check the size of your doors frame to avoid wrong purchase.

Completely Surface Mounted. Grade 1. Tamper Resistant. Static Strength 1,500 lbs. Dynamic Strength 70 ft-lbs. Endurance 1,000,000 Cycles. Horizontal Adjustment. Dual Voltage 12 or 24 VDC.

Fail-secure operation - Door remains locked if power to the strike is lost. Includes Stainless Steel No-Cut and Silver-Colored Aluminum Low-Cut Strike Plates. Can be used with virtually any cylindrical door locking system. Can be used with an optional digital keypad, pushbutton switch, and other entry devices. Reversible non-handed design fits either right-hand or left-hand doors.

Field-selectable for fail-safe or fail-secure operation. This strikes feature an ultra-compact design and adjustable stainless steel keepers with over 2,200lbs 1000kg of holding force in fail secure mode. The strikes release electrically with up to 25 lbs of door preload. Single solenoid operates on 12VDC power. Provides electrical remote control, allowing door to open without actuation of the exit device.. Suitable for fire exit door with Push-rod lock.The operating principle of electric strike is that electromagnetism produces the force to pull or push the release lever so that to lock or open the door. This electric Strike is designed for rim exit devices with 34 19.1 mm Pullman latchbolts. For Indoor Use Only.. Push panic bar need buy seperately, please refer to ASIN B06XWY91HQ.

Caution Please confirm that this is the size you need before ordering to avoid mistaken purchases The number of times the electric strike door lock is used is 300,000 times, the length of service life is based on the frequency of use. The electric strike lock may not work for 1 if you are aluminum power supply and used for a long time, the power may not be enough, not necessarily a problem with the strike lock, you can try to change the power supply. 2 if the coil is not burned, when used for a long time, the activity of the core back and forth will produce the accumulation of dirt, you can try to remove the accumulation of dirt with a dry cloth to wipe. Two Models You can set the operation mode of fail safe or Fail Secure. Just loose the screw and tighten it in the other hole. Fail SafeNCWhen power off,the door is in the open status. Fail SecureNOWhen power off,the door is in the closed status. Choose from two modes, allowing you to have more choices and suitable for more places.. Maximum Impact Strength After the electric door lock is powered on, the maximum impact resistance is 2200 lb. Our electric door strike is made of high-quality alloy metal materials after passing countless tests before leaving the factory.. Accessories Include mounting tabs2, screws4, diode1, installation paper1, instruction1. If your door is a metal door, you need to use the mounting tabs, if your door is a wooden door, you don't need the mounting tabs. We provide installation paper, you can stick it on the door frame during installation, no need to measure and draw the line, the installation paper can be torn off and will not remain on the door frame, easy to clean.. Application Electric lock can be used in door access control system, cylindrical locksets,mechanical locksets. This electric door latch can be used to convert cylindrical lock sets into an electronic access controlled locking system. It meets a variety of needs.. AttentionService Before ordering, please check the size of door's frame to avoid wrong purchase We have high-quality after-sales service, if you have any questions, you can reach us at any time, we will be happy to help you within 24 hours. Sincerely hope that our electric strike door lock can bring security to you and your assets.

Seco-Larm SD-994A-A1SQ.

HES 5200 Electric Strike Works with cylindrical locksets up to a 34 throw latchbolt.. The Grade 1 solution with horizontal adjustability.. Plug-in connector and trim enhancer included. PoE friendly.. Complete Pac INCLUDES 501 faceplate for use with cylindrical locksets in ANSI metal jambs 4-78 1-14 123.8mm 31.75mm, Square corners and flat faceplate 501A faceplate for use with cylindrical locksets or spring latches in aluminum frames 4-78 1-14 123.8mm 31.75mm, Radius corners and flat faceplate.. WARRANTY SecuriCare five-year, no-fault, no questions asked..

Failure secure Keep Locked if power outage.. Testing to 1000000 cycles. Note Work with knob lock,knob lock should buy seperate. Work with mechanical lock,mechanical lock should buy seperate.. Holding Force 1000kg 2200lbs. Designed for Metal Frame drill a hole,then install it directly.. Material Stainless Steel .Voltage DC12V..