Top 6 Best Elinchrom El30162

This is a simple and practical blinking flasher module, the ON and the OFF duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads. This blinking flasher module is ideally suited for driving for example LED lamps, hazard lights, warning signs, safety beacons, DC light bulbs, etc ..... Operating voltage DC 4.5 to 30V. Maximum current 10 Amp. Maximum load 300 Wattsat DC 30V, 120 Wattsat DC 12V. NOTE this product no step-up, step-down or inverter function, only for DC load. Time-ON 0.01 to 15 seconds and Time-OFF 0.01 to 15 seconds adjustable. The output ON - OFF - ON OFF cycle alternates.. Two precise 25-turn adjustable potentiometers, you can use a screwdriver to easily adjust the ON and OFF time you need. With LED indication for output status.. Compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

Godox SK400II Speedlite Monolight has a Large LED Display, Precise Output Displayed on LCD Panel, 40 Steps from 116-11. Auto Memory and Recovery of Adjusted Panel Settings. 150W Modeling Lamp Adjusts in 5 to 100 Power Level, Outstanding output stability,no more than 2 shifts when under the same ouput ,Auto memory and recovery of adjusted panel settings.. Anti-preflash function enables synchronization with cameras that have a one- preflash firing system , Built-in heat elimination fan machine, overheat protection, effectively protect flash safety and extend flash life.The Voltage 110V. Built-in Godox 2.4G wireless X system , Godox SK400II Flash Monolight is A Cost-Effective Compact Flash Strobe .With Godox 2.4G X system wireless transmission,Godox SK400II Flash Monolight is compatible with flash Transmitter Godox Xpro, X1,X2, XT32 or FT-16 flash trigger. 2.4G 16 group, 32 channel. Using high-quality large capacitors to store electricity, 0.1-1.0s Fast Recycling ,continuous shooting does not wait, providing shooting efficiency. Godox SK400II Studio Strobe Monolight for E-Commerce Product Shooting, Portrait and Lifestyle Photography. In Small and Medium Studio Shooting, It Can Work as High Light, Background Light or Hair Light.

Function CompatibilityVISION4 flash only supports M, Multi, 2.4G wireless remote mode. It DOES NOT support TTL and HSS Mode. Sync Speed is up to 1200 seconds. It is compatible with Canon Nikon Panasonic Olympus Pentax Fujifilm and Sony with Mi Hot Shoe cameras, such as A9 A7RIVIIIII A7IIIII A7SIIIII A7R A7S A7 A6600 A6500 A6300 A6000 NOTE NOT compatible with Canon EOS Rebel SL3250D, Rebel T71500D 2000D, Rebel T1003000D 4000D. All-in-One Outdoor Flash300W Strong Power, High GN60, 7 steps of power adjustment164 to 11, fast recycling time 0.4s2.5s, short flash duration from 11000s to 110000s, 13W LED modeling lamp will automatically go off after 1 minute. To activate it, press the modeling lamp power button.. Large Capacity Lithium BatteryThe Neewer VISION4 uses international brand battery which supports large capacity power box 10.8V7800mAh, provides 1000 full power flashes and recycle in 0.4-2.5 seconds Perfect protection mechanism with overheat protection, low-voltage cut-off protection. Built-in 2.4GHz SystemBuilt-in 2.4G Wireless Trigger System, up to 16 Channels 0-15, Working distance 20 meters, When using 2.4G wireless VC-816TX trigger, VISION4 Speedlite Monolight Can be triggered manually. Bowens Mount PortableDesigned with Bowens Mount, more easy to connect with other photography equipment, and match with metal Bowens cover and white soft diffuser at the same time and the light including battery weighs about 4.8lb2.2kg, easy to carry for outdoor shooting.

Lightweight Portable Only weighs 2.1KG with 220102128mm dimensions without the flash tube and reflector.. Build-in 2.4G Wireless X System Optic transmission with even illumination and stable output. Build-in 2.4G wireless transmission offers all-in-one functions and 100 meters further transmission distance.. Master Slave Function AD400Pro can be used in combination with Godox TTL camera flash, TTL outdoor flash, etc.. Godox Mount Bowens Mount With New Godox-mount to install lighter and more portable accessories which can be used in combination. Provided with a Bowens-mount adapter ring to install Bowens-mount accessories.. Two Power Supply Methods Professional lithum battery pack with 21.6V.2600mAh to provide 390 full power flashes and recycle in 0.01-1second. Adopt AC power source to achieve AC-DC dual-purpose. NotedBattery Maintenance 1. Don't empty the battery before charging. 2. Please charge the battery when it is unused, otherwise, it will be over-discharged, then it will not perform well..

All-in-One Outdoor Flash 300Ws Strong Power, 0.01-1.8s Recycle Time, 300 Full Power Pops, Stable Color Temperaturechange within 100K over the entire power range in color temperature mode. 9 stop range of power adjusts from full to 1256 in 110th stop increments. 12W Bi-Color Dimmable Modeling Led 12W 3000-6000K500K Bi-Color Modelling Light, 1 to 10 levels Light Brightness Adjustable. Great TTL Auto Flash Compatibility Godox AD300Pro is Compatible with Canon E-TTL II, Nikon i-TTL Autoflash, Sony, FUJIFILM, Olympus and Panasonic TTL Autoflash System. With MasterSlave Function, AD400Pro Can be Used in Combination with Godox TTL Camera Flashes, TTL Outdoor Flashes, etc. Bowens Mount Godox Mount Available Godox AD300Pro Comes with a Bowens Mount Adapter Ring to Install Bowens-mount Accessories. Remove it, You Can then Use the Godox-Mount to Install Lighter and more Portable Accessories. Purchase adapter rings of other brands to replace more accessories e.g. Broncolor, Profoto, Elinchrom,etc. Lightweight Compact Portable Godox AD300Pro weights 2.75lb with the small size of 7.53.93.5in. Easy to use buttons command a full range of functions like reliable Channel triggering, Group mode selectivity, HSS. The LCD panel clearly displays the status of all remote Strobes, so you always have control of group lighting setup.

600Ws, GN87, 9 steps of power adjustment11 to 1256. Stable color temperature at 5600200K over the entire power range.. Fully support High-speed sync up to 18000 seconds, first-curtain sync, and second-curtain sync.. Optical and Built-in 2.4G wireless transmission to offer stable output. 80M Wireless Control with precision.. 11.1V8700mAh large capacity lithium battery pack to provide 500 full power flashes and recycle in 0.01-2.5 second. DCAC are both applicableChange to AC alternating current module after lithium battery pack detached.. 10W LED modeling lamp can adjust light brightness in three steps. Large and clear dot-matrix LCD panel offers convenient operation. With handle to adjust different shooting directions of the flash. USB firmware upgrades helps keep pace with the latest technology..

pHeavy-Duty Versatile Made of 100 solid stainless steel, the C-stand serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and more. Adjustable Height Extension Arm The center column with three sections can be adjusted from 4.7ft to 10.5ft 146cm to 320cm as needed. Foam grip prevents the stand from slipping. Extension arm with 14 and 38 threaded ends are compatible with most equipment. p2 Metal Grip Heads with 4 Holes Grip heads lock the arm and allow angle adjustment. 4 holes in different sizes are compatible with various equipment.. pTurtle Base Turtle base with non-slip pads allows sandbag placement for adding stability and prevents scratches on floors. Sliding legs and can be folded flat for space-saving storage. pPackage Contents C Stand, Stand Base, Extension Arm, 2 Grip Heads.

Accurate color renditionIts 29.5 length and 1.9 diameter make mounting it unobtrusively, or even gaffer-taping it an option. It has a wand-like shape, so it just about begs to be handheld. With a CRI of 96 and a TLCI rating of 98, it produces highly accurate color renditions and delivers pristine and natural results, greatly saving your post-production time. You can adjust the color temperature from 2700 to 6500K, and dim the light from 0 to 100.. HSIRGBFX Modes The Godox TL60i allows you to be more flexible in your filmmaking, providing multiple lighting modes to suit your needs. In addition to HSI Color Mode, the Godox TL60 allows you to adjust the light color via RGB Mode, change the color temperature via CCT mode, or use built-in 39 preset lighting effects via FX Mode.. 4 control options, dual power solutions The Godox TL60 comes with a multitude of control options including on-board, a dedicated remote, a smartphone app, or DMX control. Depending on the configuration you need and features both an internal lithium-ion battery as well as external AC power options to power the light.. More App Features The Godox Light APP Supports Android and iOS systems. It allows for finer control of the light's HSI, CCT, and FX functions. There are a collection of LEE ROSCO color filters available, and the color picker supports you to simply point your phone's camera at a color, capture it, and your light will reproduce it instantly.. 3 kits are available for your options The Godox TL60 comes in 3 kits which contain one, two, or four Godox TL60 LED lights. The benefits of a single tube light for things like light painting are quite obvious, but where the Godox TL60 really seems to shine is in its creative setups comprised of many tubes all working together to form a single cohesive display, all of which can be independently controlled remotely from the 2.4Ghz remote, smartphone app or DMX control..

This 7 standard reflector mount diameter is 9cm with 10 30 50 degree honeycomb grid, compatible for Bowens standard mount studio light.. Unique and exquisite reflective texture inside, for excellent light output, makes light output softer and more focused.. Comes with 10 30 50 honeycomb grids, they can great narrow down the light-throw from your lamp shade and provide an excellent shadow effect.It alter the shape and intensity of the light output from your flash heads. Use of a grid will result in a small circle of light, when it is attached to the front of your light source.. Comes with a white soft cloth for softening the light output. Made of high-quality aluminum material, solid and durable.Brilliant soft lighting with diffuser, specially designed for 7 Standard Reflector or Godox AD600 AD600B AD600M AD600BM Flashpoint Xplor 600 . This set is perfect for photography of product, advertising, figure, portrait, art, wedding etc..

Godox SK400II Speedlite Monolight has a Large LED Display, Precise Output Displayed on LCD Panel, 40 Steps from 116-11. Auto Memory and Recovery of Adjusted Panel Settings. 150W Modeling Lamp Adjusts in 5 to 100 Power Level, Outstanding output stability,no more than 2 shifts when under the same ouput ,Auto memory and recovery of adjusted panel settings.. Anti-preflash function enables synchronization with cameras that have a one- preflash firing system , Built-in heat elimination fan machine, overheat protection, effectively protect flash safety and extend flash life.The Voltage 110V. Built-in Godox 2.4G wireless X system , Godox SK400II Flash Monolight is A Cost-Effective Compact Flash Strobe .With Godox 2.4G X system wireless transmission,Godox SK400II Flash Monolight is compatible with flash Transmitter Godox Xpro, X1,X2, XT32 or FT-16 flash trigger. 2.4G 16 group, 32 channel. Using high-quality large capacitors to store electricity, 0.1-1.0s Fast Recycling ,continuous shooting does not wait, providing shooting efficiency. Godox SK400II Studio Strobe Monolight for E-Commerce Product Shooting, Portrait and Lifestyle Photography. In Small and Medium Studio Shooting, It Can Work as High Light, Background Light or Hair Light.