Top 6 Best Ender 3 Glass Bed

Made From The Highest Quality, Perfectly Flat Glass We use only the highest quality tempered glass - completely flat, smooth and just the right size 235mm x 235 x 4 - no scratches, dips or pits. Tempered glass is more durable and heat resistant than standard borosilicate glass, meaning fewer issues and less frequent replacement. Perfectly Compatible Our 3D printer bed plates platforms are compatible with the Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235 mm print bed. 8 Clips Included No more ugly black binder clips holding your print bed. Not only are they poor quality, but they limit the build area. What's more, our 3d printer heatbeds are securely packed in protective, custom foam - they'll arrive in perfect condition, ready to use. Easy To Care For Our glass is super easy to clean - just wash it off with some water, clean it with some standard glass cleaner, alcohol or acetone, reapply some 3D printer glue if desired and get back to printing. Incredible Value Even the best printer bed will have to be replaced eventually. Our 2 pack provides an incredible value and means that you'll always have a spare on hand.

Enhanced Illumination For Your Printing AreaImprove your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.. Improve Print Quality with Constant TemperatureProvides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.. Dustproof and Fireproof, Safe to UseProtect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.. Fast Installation and Long-term Use5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.. Isolate Noise and Enjoy Creation Quietly An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process. Wide CompatibilitySupport printer size include spool holder height is smaller than 28.725.621.6. Please measure your printer height before ordering. Compatible with Creality Ender 3V23V2 NeoEnder 3S13S1 Pro3S1 PlusEnder 3ProEnder 33NeoEnder 3MaxNeoEnder 6SEEnder 5 5Pro5S1, Anycubic KobraAnycubic Mega ProELEGOO Naptune 3D Printer..

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.. No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.. Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.. Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.. Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..

Compatibility Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer's platform firstly.. No Edge Curling The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed.. Super Convenient It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.. Excellent Flatness Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing.. High Grade Material Made of 100 Genuine Borosilicate Glass, thick and high quality. Glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Using alcohol or acetone to wipe it after repeated use..

Excellent adhension - Our state of the art carbon and silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those prints with difficult warping issues. Will need some glue when printing ABS.. Very easy to take off the models. When the print platform cools down, you can grab a complete small model without borrowing any tools. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again.. Completely flat. A lot of Ender 3 owners complain about warped beds. This heated bed platform solves that problem once and for all. It's a nice upgrade to the original aluminum base of the print surface. It level things out if there is any minor warping going on there.. Very durable. The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400C. Creality 235235cm glass bed is perfect for Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro.. Upgrate design. After scan many negtive review of the old version. We have update our design. We print small logo in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update, the prints will have a smoother finished on the finished part..

Compatibility Our Creality authentic glass bed is applicable with Creality 3D printer Ende 3, Ender 3 Pro, Ender-3 V2, Ender 5, Ender 5 Pro, CR 20 and CR 20 Pro. Please confirm the size of your printer's platform firstly.. No Edge Curling 3D printer coated glass bed, prints can stick on the glass bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade accessory.. Excellent Flatness Upgraded 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of prints.. Super Convenient Very easy to take off the prints, no tools needed. This glass bed could be fixed with middle sized clips four clips are included in the package and cleaned with alcohol or acetone at room temperature.. No Indentation Printing Upgraded Ender 3 glass bed has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on prints surface during 3D printing..

New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no need to hack at it with the scrapper. Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will stick.. Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality printers Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, and CR-20, CR-20 Pro, or any other printers with a bed size of 235mm by 235mm.. Super Flat for the perfect first layer - Unlike magnetic bed sheet or PEIsticker, which can be tricky when leveling and doesn't work at all temperatures. But the Self Release Glass Bed works fine with all range of temperature, compatible with PLA, PETG, and ABS.. The Self Release Glass Bed is secured to the printer using middle-size clips available at all office supply stores and unlike Magnetic Spring Steel, PEI, BuildTak, or any other build plate surfaces, this bed can last a lifetime. If it's not sticking as well as before, give it a wipe with IPA alcohol, and it will work as new.

No Edge CurlingAystkniet new Creality 3D printer glass bed provides stronger adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Molds will be sticked on the bed firmly without glue, avoiding the issue of print edges curling.. Excellent FlatnessCreality ender 3 build plate provides flatter and smoother build surface than magnetic mat or sticker, ensuring high flatness for the bottom of model during 3D printing. You would get a totally flat prints and your prints are coming out with that super shiny and smooth texture. Upgrate Flawless PrintingCreality ender 3 glass bed upgraded has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.. Super ConvenientVery easy to take off the models. Once the hotbed cools back to room temperature, the prints pop right off without the need for a scraper or anything else, you will get your perfect prints. 3D printing glass bed could be fixed with middle sized clips and cleaned with a small amount of water at room temperature.. High Grade Material100 Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 . Applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-6 Se, CR-20 and CR-20 Pro, confirming your printer firstly..

Very easy to take off the models No tools needed when removing models.. Use clips to fix the glass plate on the hot bed.. Higher temperature higher sticky. The models will stick on bed firmly when temperature is high.. Fit for Ender 3 Ender 3X Ender 3 Pro Ender 5 CR-20 Pro 3D printer.. Life-time professional technical supports..

Easy to Remove Model within 1 Minute The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.. High Viscosity and Strong Adhesion Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.. 0.15MM of Flatness Recovery Model This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.. Wear-Resistant and Scratch-Resistant, easy to clean There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.. High Hardness and Durable This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness..

Borosilicate GlassBased on 100,000 experiment report,this material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance,far better than tempered glass.So borosilicate glass is the best choice for 3d printer.. Worked PerfectlyThis Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.Thick 3.8mm glass plate will not warp or bend under heat.. Easy to CleanJust wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.No need extra clips because of its own material and thickness.It won't take up build area.. High Quality Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5 and CR-6 SE, CR-20, CR-20 ProDISWAY01.. 18 Months Warranty100 Dcreate Genuine Brand New - Original packaging, premium quality. 100 hassle-free replacement guarantee within 18 months warranty and replacement for quality issue..

No curlingCreality 3D printer glass bed has stronger adhesion. As the hot bed is heated to a higher temperature, it provides greater adhesion. The mold will be firmly adhered to the bed without glue, avoiding the problem of curling of the printed edges.. Intimate product upgrade After purchasing the Ender 3 Glass Bed, we will provide you with matching glass bed clips with silicone to protect the Ender 3 glass bed and prevent it from popping out. The clip is spring-loaded, upgraded, more stable, and easy to install.. High-quality material The surface of 100 pure borosilicate glass is coated with an inorganic microporous coating, the hardness is 8 Mohs, and the heat resistance is as high as 400. Suitable for Creality 3D printers, such as Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20 and CR-20 Pro to confirm you The printer first.. Flawless printing The CREALITY logo after the upgrade of the Ender 3 Glass Bed is much smaller than the old version, which avoids leaving logo dents on the mold surface during the 3D printing process.. Super convenient Ender 3 Glass Bed is very easy to take off the model. Once the hotbed has cooled to room temperature, there is no need for a scraper or anything else, and the print will be ejected immediately and you will get a perfect print..