Top 6 Best Fan Header

3 pin pwm fan splitter, pwm fan hub, 3 Way 4 Pin PWM Fan Splitter Cable to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans PWM fans can spin at the same speed using software from a motherboard equipped with PWM control. 3 pin pwm fan splitter, pwm fan hub, Each extension cable supports PWM function and speed regulation Each PWM cable extension cord is braided in flexible and sturdy black nylon to provide long-lasting performance. 2 pack black fan power supply extension cables,3 pin pwm fan splitter, pwm fan hub, Each fan extension cable is 12 inches long for optimum PC fan placement.. extension cable supports PWM function and speed regulationsupport 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans, 3 pin pwm fan splitter, pwm fan hub.. 3 pin pwm fan splitter, pwm fan hub, We reply all emails in 24 hours and provide question-asked refund if you received damaged item or when other product package delivery issues happened .

4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header PWM splitter cable connects an additional fan to increase airflow in your computer case Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans. PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans PWM fans can spin at the same speed using software from a motherboard equipped with PWM control. CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans. Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case. 3-pin 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans Add more cooling to your computer with this PWM fan splitter cable.

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.. Widely Compatible The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.. Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean tidy.. Package contents 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug..

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

-MOST EFFICIENT SATA TO FAN ADAPTER IN 2020 Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat tidy way to add fans expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down speed up the fans up to the maximum speed. You need to connect the SATA the 4 pin at the same time to run multiple fans.. -PWM FAN CONTROLLER TEMPERATURE CONTROL The CPU Port red port, would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.. -INSTALLATION CONFIGURATION Simple installation easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. -STEP BY STEP SET-UP You will receive 1 hub 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hubs PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attachstick it on the chassis.. -MONEY BACK PRODUCT WARRANTY Our product is backed up by manufacturers warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100 refund. We will go an extra mile to redress the situation at hand..

Manages Multiple Fans - Our PWM fan cable expands one motherboard PWM fan header to support up to five internal cooling fans at the same time to reduce the load on the motherboard. Easy Installation - Simply plug the PWM case fan splitter into the motherboard and attach the other end to the chassis with the double-sided adhesive. Flexible Use - The PWM 5 way PC fan splitter can be used as a 4 pin fan splitter for most motherboard cooling fans. Our pc fan extension cable offers greater flexibility between motherboard and CPU cooling fans. Designed for Performance - The connector types of the PWM fan extension cable includes 1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan including Detect tach pin, and 4 TX4 4-pin Male for case fan. Money-back Guarantee - Backed by our manufacturers warranty, if your fan splitter extension cable falls short of your expectations for any reason, contact us for a full refund.

01.upHere ARGB PWM Fan Hub - Supports up to 7 Fans 3PINPWM 4PIN5V 3PIN ARGB, Occupying only One 4-pin MB FAN Header System Fan or CPU Fanand One 5V 3-pin ARGB Header.. 02.upHere P7P Fan hub provides individually addressable RGB lighting with software control for unique lighting effects and colors.5V ARGB Header Compatible with Asus Aura, ASRock RGB, GIGABYTE and MSI RGB.. 03.Capable of connecting to 7 PC fans simultaneously for cooling the computer system. Each port has its own PWM function and the fan speed can be adjustedat the same time. The Fan hub draw the PWM signal from motherboard and feedback fan speed to the motherboard and draw an ARGB signal from this cable only the speed of Fan 1 can be identified by the system.. 04.Powered by system PSU Sata connection to ensure 12V stable power for up to 7 fans.. 05.Easy and Quick Installation with a Compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed double-sided tape..

Power up to 5 PC Fans from a Single 4-Pin PWM Fan Header. Connector 1 Female 4-pin Connector 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans. Compatible with all 12V CPU and case fans with 4 pin or 3 pin connector PLEASE NOTE Do not exceed 12V , 2A total output.Please check your devices specification when to use the PWM fan hub.

The 1 to 5 pwm fan splitter can supply power to 5 fans.. Come with double-sided tape, easy to install. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean.. Compatible with all 4 pin and 3 pin case fans.. Package included 2 pack 1 to 5 splitter 5 way fan power supply cable. We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please dont hesitate to contact us, we will serve you our best..

Supports 10 4-pin Independent Fans Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Direct SATA Power Input Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Included TiesVelcro for Easy Placement 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Blue LED Power Indicator.