Top 6 Best Fish Tank Divider 10 Gallon

- No messy drips, and a sturdy one way valve to improve suction. You can clear 30L in about 5 minutes.   - Filter through the gravel using the attachment to suck up food, fish waste and toxins that build up in your tank. - Use The attached filter to prevent sucking up small fish and shrimps. - A lot of fish accessories are overpriced. This simple, robust product does the job of a much more expensive siphon at a fraction of the cost.   - If you're not happy for any reason just let us know and we'll give you an instant refund. No questions asked.

Fish tank separator size 9.76 11.40.12 24.8cm29cm3mm, aperture 0.2 5mmSuitable for aquariums with a width of 10 inches, Using laser cutting, the circumference and the hole are smooth, the aperture is well-designed to secure the safety of your fish. Please measure your tank before purchasing.. Product material Eco-friendly, non-toxic, high hardness, corrosion resistance, easy to clean high transparent acrylic PMMA, the light transmittance is more than 92, does not affect the aquarium landscaping and looking, and will make the fish tank more beautiful under the light.. New design The state of the art design with long holes around, which is Conducive to fish feces through .The holes are denser, allowing more water to pass through.. Complete accessories Including transparent suction cups8, fixing clip8, transparent screw4, screwdriver1 easy to install, no need to purchase additional accessories, and provide more for spares.. Safety packaging Acrylic fish tank isolation board, including accessories, are covered with protective films on both sides to prevent scratchesThe accessories are packaged separately, and the partition is wrapped with shock-absorbing materials for transportation protection purpose,If anything is missing or damaged in shipping please contact us. ..

For Aqueon brand 10gal tank ONLY It will not fit Top Fin, Marineland or any other brand's tanks Don't try, it will NOT fit.. Dimension 9.95 x11.5 inch. 1 acrylic divider 4mm thick cast acrylic, 4 suction cup mounts. High quality silicone suction cups last a long time. If the suction cups age or don't stick, boiling them in hot water to restore the pliability, This will extend the lifespan of the suction cups. Please confirm your tank's brand and size before purchase to avoid unnecessary returns..

ONLY COMPATIBLE with AQUEON tank size 20.25x10.5x12.6. All 10 Gallon tanks are NOT the same size. PLEASE check tank size before buying.. Easy to install and maintain - No Suction Cups Required. An installation video link is provided on the instruction sheet.. Made from a solid sturdy non toxic material.. Adjustable sidebars. Slide the side bars OUT against the glass to remove gaps and slide up to fit under the rim.. Not suitable for reptile tanks unless siliconed in place. Tank NOT included..

Package Contains Aquarium Divider Kit includes 11.49.50.12 29cm 24.3cm 3mm acrylic sheet2, suction cup16, transparent fixing clip16, transparent screw16, transparent nut16, transparent connecting piece6, screwdriver1 Easy to install, no need to buy other accessories, and more spare parts are provided.. Adjustable Design This fish tank divider has long holes all around, you can place it horizontally and vertically, and you can adjust the gap on both sides according to your needs, which can effectively ensure the safety of small fish. The connecting piece accessory allows you to freely assemble the divider to fit more sizes of aquariums the holes are denser to allow more water to pass through.. High Quality Material The aquarium divider is made of high transparent acrylic, non-toxic, high hardness, corrosion resistant, and does not affect the ecosystem of the fish tank or viewing. It is laser cut with smooth circumference and aperture, and the aperture is well-designed to ensure the safety of the fish.. Easy to Install Firstly, tear the protective film on the surface. Secondly, combination panel, if the size is right, splice it directly, if not, lay the two panels flat, overlap them in parallel to a suitable size and fix them with Splicing fixed plate and screws. Thirdly, Fix two 90 degree parts with transparent screws on both sides of isolation board. Fourthly, install suction cup on two 90 degree parts. At last, put it in the fish tank.. Safety Packaging The acrylic fish tank isolation board kit is coated with protective film on both sides to prevent scratches. Please peel off before use. The accessories are packaged separately, and the partitions are wrapped with shock-absorbing materials to protect transportation safety. If there is any loss or damage during transportation, please contact us..

Fits Aqueon, Marineland, All Glass, Perfecto Brand Aquariums - See Our Chart Image for Inside Dimension Specs. Large Variety of Sizes Available - from 5.5gal up to 90gal Models. High Density Polyethylene HPDE A Reef Safe Silicone Resin. Easy to Install Uninstall - No Suction Cups To Replace Due to Failure. Perfect For Reptiles, Arachnids, Amphibians, Fish, Breeders.

It comes with 3 pieces of acrylic dividers for 10 gallon fish tank. The actual width of the board is 9.92 inch. Please check the inner width of your tank before ordering it.. It works for 10 gallon fish tank with 10.5 width. See the image of the actual tank outer measurements, 20.25L x 10.5 Width. The dividers will give the chamber heigth for most of the skimmers.. It does not come with fish tank or silicon glue..

AQUARIUM GRID ISOLATION BOARD-- Made of premium material for durable and practical use.. FISH TANK EGG CRATE-- Includes 4pcs Aquarium Isolation Panel and 4pcs suction cup.. FISH TANK FILTER BOARD-- Grid divider can be cut and spliced, convenient to use.. FISH TANK DIVIDER PANEL-- You can easily divide your fish tank into several compartments with these divider holders for breeding or separation.. GRID ISOLATE BOARD DIVIDER-- Easy to install and remove. Suitable for Isolate fish, build platform, bottom filter..

NOTHING LIKE OLD SCHOOL The Clear-Free Premium Under Gravel Filter is air driven and utilizes an Air Pump not included to cycle crystal clear water throughout your aquarium, while keeping a crisp and neat look inside. This means theres less moving parts, making for simplistic and easy maintenance. This filter is suitable for most 10 gallon aquariums.. BIOLOGICAL, CHEMICAL, AND PHYSICAL FILTRATION As air is pushed through the Air Stones and rises through the Lift Tubes, water is gently suctioned through gravel and the filter plates, allowing both air and water to pass through the Filt-a-Carb Activated Carbon Cartridges. When water continues to be drawn through, anaerobic bacteria collects and colonizes within the gravel and filter plates.. ALSO AERATES YOUR TANK Since the Clear-Free Premium Under Gravel Filter is air driven through the use of Air Stones and an Air Pump not included, it also aerates your tank. In essence, your aquarium is being filtered and aerated at the same time, though the same system Its a filter and bubbler in 1. ITEMS INCLUDED The Clear-Free Premium Under Gravel Filter includes 2 Filter Plates, 2 Adjustable Lift Tubes, 2 Straight Airline Tubes, 3 Filter Plate Connecters, and 2 Replaceable Filt-a-Carb Activated Carbon Media Cartridges.. MEASUREMENTS Each Filter Plate Separately 9.5 W x 9.5 D Filter Plates Together 19 W x 9.5 D Each Lift Tube at Filter Plate Base 9.75 12.75.

Sufficient quantity you will receive 4 pieces of black plastic meshes and 10 pieces of binding bars in one package in total, they come in black color, which is not easy to go out of date At the same time, enough quantity for your daily use, you can also share them with your friends and family. Suit combination the fish tank divider screen mesh and sliding bars are a nice combination, which is very convenient for you to use You don't need to buy additional tools to use them, the combination of packages can meet your actual needs, bringing you a nice and satisfactory use experience. Easy to use the plastic mesh has a simple operation First, you need to tailor the plastic mesh into the right size and shape, then put it in the right place, fixing it with a black sliding bar, you can get a nice decoration in this way Simple methods can help you install quickly and save a lot of time. Appropriate size the decorative plastic sheet is approx. 33.5 x 26 x 0.15 cm 13.19 x 10.24 x 0.06 inches in size, and the sliding bar is approx. 31 x 0.8 x 1 cm 12.2 x 0.32 x 0.39 inches The right size can provide a large convenience when you use them Besides, the sliding bar is light in weight, so you can pick it up easily. Lasting material the screen meshes are made of plastic, which is hard and strong, sturdy and smooth, quality and reliable, it will not deform and break easily, so you can use it with confidence In the meantime, the plastic has a long service life, so you can use it for a long time.

This grid divider are made of plastic material, non-toxic and tasteless, won't affect water quality.. Use these divider holders can effectively separate fish and prevent them from biting each other.. This plastic grid can cropped and free splice combination. Our grid divider trays are perfect for all types of freshwater and saltwater aquarium.Effectively separate the fish and avoid bites each other decorative support frame for easy cleaning of feces turtle drying platform controller storage rack.. Package include 4pcs aquarium egg crate. SizeLW 11.8 inches x 11.8 inches, grid 0.39 inches x 0.39 inches, thickness 0.27 inches..