Top 6 Best Flared Tube Fittings

Short flare nut for connecting to a tube or fitting. Connects to copper, brass, aluminum, or steel tubing. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to 250 degrees F. Resists mechanical pullout for a more secure connection. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Hex plug with SAE 45-degree flare male end terminates tube size fitting. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. For use with LP and natural gas, refrigeration, and hydraulic applications. Used With Copper, brass, aluminum and steel hydraulic tubing that can be flared.. Low cost and reusability, long or short nut. Good resistance to vibration..

Coupler for connecting two pipes in a straight run. Fitting has JIC flared male connectors for connecting to female JIC pipes. Made of steel for greater rust resistance than iron. Working pressure of up to 5000 psi. Operating temperature ranges from -63 to 400 F.

Adapter for connecting pipes or fittings of different types. Fitting has a JIC flared male connector on one end and an NPTF male connector on the other. Made of steel for greater rust resistance than iron. Working pressure of up to 5000 psi. Operating temperature ranges from -63 to 400 F.

Cap fitting for closing the end of a male-threaded flare tube. Forged nuts for refrigeration applications. Metal-to-metal seal. CA360 brass for strength and resistance to corrosion. Operating temperature range of -65 to 250 degrees F -53 to 121 degrees C.

Contains14 OD-1pc 516 OD-1pc 38 OD-1pc12 OD-1pc 58 OD-1pc5pcs. The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.. Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.. For use with LP and natural gas, refrigeration, and hydraulic applications..

58 x 58 flared union for connecting and disconnecting two pipes more easily than couplings. This fitting has a 45-degree flare connection on both ends.. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -65 to 250 degrees F. Suitable for copper, brass, aluminum, and steel tubing.

Adapter fitting to connect two tubes with different end types. Tube connection on one end and male NPTF connection on the other. Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Maximum operating pressure of 6,000 psi at a temperature range of -425 to 1,200 F. Meets SAE J514 standards for quality assurance.

UNIVERSAL DESIGN - Flared Tube Fitting Connects to hose 8mm ID and 10mm OD on one end and a 14 female G threaded connection on the other.. HIGH QUANLITY MATERIAL- The Reusable Fitting surface is made of nickel-plated nickel, and the strength and hardness are large. and it's not easy to wear, durable and has a long service life.. ADVANTAGE - Copper-plated nickel material is not easy to rust in humid environment, strong in oxidation resistance and corrosion resistant. EXCELLENT DESIGN - Easy to install and disassemble.Lock-type quick-twist joints, the ends can be arbitrarily removed. APPLICATION - Flared Tube Fitting are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries Recommended for low pressure air hose applications.

Cap for closing the end of a pipe or fitting. Fitting has a JIC flared male connector for connecting to a female JIC pipe. Made of steel for greater rust resistance than iron. Operating temperature ranges from -63 to 400 degrees F. Meets SAE standard J514 for quality assurance.