Top 6 Best Fluke Networks Pro 3000 Probe

Tone and trace wire on non active networks SmartTone technology provides 5 distinct tones for exact pair identification Battery 9 volt alkaline. Sends a loud tone up to 16 kilometer 10 miles in most cables and provides 5 distinct cadences for isolating individual wire pairs. Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip. Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack. Push button switch selects Solid, Alt and Off.

Cable Performance testing up to 10GBASE-T via frequency-based measurements. Network features including IPv4 and v6 ping, nearest switch diagnostics IP address, name, port VLAN number, and advertised data rates.. Ethernet Alliance certified PoE Verification Detects the PoE class 1-8 and power, and performs a load test of available PoE from the connected switch. Displays cable length, wire map, and distance to open or short . Manage results and print reports from LinkWare PC . Includes IntelliTone Probe to assist in locating cables.

IntelliTone digital toning eliminates noise and false signals. SmartTone analog toning precisely isolates individual wire pairs. Locates cables safely and effectively on active networks. Verifies twisted pair installation with visual end to end continuity test. Probe detects digital signal and 1 kilo hertz signal from the analog toner. Probe has built in pair tester to identify open, shorted and crossed pairs. Signal strength indicator LEDs so you can help identify 1 cable that is bundled with other cables. Confirms cable location, verifies cable continuity, and detects cable faults opens, shorts, and reversed pairs in 1 step.

Copper cable verifier kit for testing voicedatavideo with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments. Includes MicroScanner2 cable verifier with detachable wire map adapter, IntelliTone 200 Digital Probe, patch cords, remote IDs, alligator clips, user guide, 2 AA and 1 9V alkaline battery, accessory pouch, duffel bag, 1 year warranty. Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, shows 4 test modes at once Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 101001000 Ethernet, POTS, and PoE. Cable tests include length 460 meter or 1500 feet with resolution to 0.3 meter or 1 foot, wire map to TIA 568AB standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables, PoE Detection Solicits and detects the presence of 802.3af compatible PoE Power over Ethernet devices to rule out power as source of problems. Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning.

Qualifies cabling performance for 10100Gig Ethernet, tests all copper media cabling twisted pair Category 5-6A, coax, and audio. Includes CableIQ Qualification Tester with detachable wiremap, IntelliTone 200 Digital Probe, Remote IDs 2-7, 2 RJ45RJ45 patch cords, USB cable, coax 'F' push on adapter, 75 ohm coax patch cord, RJ4511 universal coupler, RJ11RJ11 patch cord, user guide, 4 AA and 1 9V alkaline batteries, test accessory soft pouch, duffel style bag, 1 year warranty on testers. Advanced troubleshooting features length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet POE detection. Works on live networks to provide Ethernet switch detection and device configuration, isolate network issues from physical cabling issues. Locate and trace cables with digital toning technology with included IntelliTone 200 Digital Probe, discover what is at the end of any cable and display device configurations speedduplex, pairing.

D814 industry standard punch down tool for reliable terminations and an EverSharp 66110 cut blade provides flexibility for different block and jack terminations. Cable stripper quickly rings and slits many types of cable. Use the Probe pic to check for loose or damaged connections. Cut and strip wire cleaner and faster with the Electricians D Snips. Connect to jacks for testing with the standard 4 wire modular adapter.

Fault finder with tone generator locates open and short circuits, measures cable length, helps isolate individual wire pairs, and detects AC voltage on the line. Works on any two or more conductor cable upto 2,500 feet 762 meters. VOP velocity of propagation can be set to match a cable's specifications to optimize the accuracy of fault location and cable length measurement. Patented smart tone analog tone generator with five distinct cadences for isolating individual wire pairs. Four digit LED display for viewing readings.

The laser powered visifault visual fault locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity, diagnose and repair simple fiber link problems and find breaks in cables, connectors, and splices in splice trays and tight fiber bends in and around equipment racks. Includes Visifault visual fault locator, 2.5 millimeter universal adapter for easy connection to sc, st, fc, and fj connectors, 2 aa batteries, lanyard, soft sided carry case with belt loop. Bright red high visibility laser driven VFK enables verification of continuity, polarity and visual location of many near end fiber faults with easy tracing of many fibers either in a cable or terminated in a rack. Accelerates end to end fiber continuity checks, speeds fiber tracing and identification, features continuious wave for steady illumination or flashing output modes for easy identification, verify proper polarity and orientation of fibers with a multi fiber connector like the mt rj. Connects to 2.5 millimete connectors sc, st, fc, and fj, rugged and built to last for demanding field applications, attaches with handy lanyard or carrying case so it's always on hand when you need it Connect to 1.25 millimeter connectors lc and mu with the nf380 adapter sold separately.

Verifies and troubleshoots virtually any copper cabling in data com networks, identifying the type of service and testing for continuity. Supports VDV cable types including RJ45, RJ11, coaxial, and bare wire banana jacks accommodate alligator clip test leads. Generates IntelliTone digital signals for locating data cabling on active networks, and Smart Tone analog signals for locating voice, audio, and video cabling on inactive networks. Country of origin Malaysia.

Remote identification kit for use with MicroScanner2 and MicroScanner POE Power over Ethernet copper cable test unit, includes 2-7 IDs, this is an optional accessory ideal for doing bulk identification of unlabeled RJ45 jacks. Item Package Dimension 5.32 L x 4.72 W x 0.91 H. Item Package Weight 0.1763698096 lb. Model Number 5006616.