Top 6 Best Flux Remover

Quicker wicking This Solder wick can be used to remove the unwanted excess solder quickly and efficiently during the solder re-working process or remove some already soldered components. The added Flux gives a faster action and helps the surfaces to be heated and solder to flow, which significantly reduces the solder repair time.. Copper braids The braid desoldering wicks are made of 100 copper wires with fine braids woven together, and have good thermal conductivity. Also using the solder braid will protect the delicate components or electronic circuit boards from damages during solderingreworkingrepairing.. Wick Application The desoldering braid wicks are suitable for industry welding, lab work or home work, practical desoldering tools to clean a joint from excess solder and correct mistakes on small PCB boards, the desoldered components can be used again, bringing lots of convenience for your work.. Easy to use Simply just place the soldering wick against the solder and place heated solder iron tip on it, the soldering wick absorbs the solder due to its high thermal conductivity. By this way, you can remove the solder from the PCB or any metal surface. Leaves slight flux residue that is non-conductive and non-corrosive so it requires no cleaning.. Packages include 2 pcs of no-clean solder wicks, each wick is 5 ft in length and 0.1 inch in width..

Solder Fume ExtractorSmoke TrapSmoke EaterSmoke FilterSolder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.. 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.. Easy to replace filter, Includes one smoke trap replacement filter. Working temperature -2060, Power consumption 120V, 30W 50 60Hz.. US based customer support, 30 days full satisfaction no question asked return period..

Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.. A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.. Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction 40W, 6000 RPM, 52CFM, Noise Level 55dbm, Life Expectancy 50,000 hours, Static pressure 125mmH2O.. Easy to replace the filter, Includes one replacement filter. Working temperature -2060, Power consumption 120V-240V, 40W 12V, 4A Power supply.. US-based customer support, 30 days full satisfaction no question asked return period..

All-purpose flux specially formulated for stained glass use. Includes an application brush Goes on easy without being runny or sloppy.. Completely water-soluble, making clean up quick and easy. Can be used with zinc, lead and copper foil. Wash all work within 6-8hrs.. Made In The USA.

Ram-Pro Pack of 36 Disposable Brushes.. Specs 5- Tubular Metal Handle - 78 long by 38 wide Horsehair Tight Bristles - with 38 Ferrule - Overall Brush Length 6.. 100 pure Black Horsehair Bristles and strong long lasting Tin Metal Fluted Ferrules Handles are Durable and comfortable to hold and Reduce Drips.. Economical Handy Tool for applying a variety of materials Interior, Exterior, such as Glue, Acid, Flux, Oil, Paste, Pipe Dope, Soldering, greasing, Touch-up, applying Zinc primer, Spreading, Dusting, Cleaning, Cooking, Baking, Art, Woodworking, Workbooking, Arts Crafts, or other general-purpose applications and more, hobbyists and professionals.. Sturdy Durable Brushes whether you use each Brush ten times or only once..

Use when a general-purpose zero residue flux remover is required. Removes rosin, non-rosin, and no clean fluxes as well as ionic and non-ionic residues.. Safe on most plastics. RoHs compliant. Suitable for use in food facilities as a Non-Food Chemical Canadian and NFS recognition letters available on request.

Use when an aggressive flux remover is required. Suitable for use with rosin, non-rosin, and no clean fluxes. Will harm delicate plastic components. Excellent for dissolving flux on the solder side of PC boards. Excellent for use in spot removing hard burnt on flux from the component side of PC boards.

Kwik-Clean flux remover doesn't need mixing or diluting. Just spray on Kwik-Clean when you're done soldering, then use paper towel to clean project. ALSO USE WITH PATINA use either the same paper towel or a clean one to apply the patina.. Mixing the Kwik-Clean with Patina gives added cleaning of the flux and a finer tone on the patina.. After Patina is applied, clean again with Kwik-Clean. Polish as you normally would..

Price for each cleaner type flux remover cleaner applications electrical electronics heat sinks pcbs. Country of origin - united states. Manufacturer name - Chemtronics. Dispensing method brush applicator series flux off volume 5Fl.Oz. Us leaded process compatible yes rohs compliant yes. CFC and HCFC Free.

Environmentally Safe, Non-Caustic. Convenient pour spout. Thoroughly removes greasy messes and residues from all types of flux and solder. Prevents oxidation crust from improper cleaning. Allows copper patina to produce a bright shiny finish, NOT RECOMMENDED FOR ELECTRONICS.

Use when a general-purpose zero residue flux remover is required. Removes rosin, non-rosin, and no clean fluxes as well as ionic and non-ionic residues.. Safe on most plastics. RoHs compliant. Suitable for use in food facilities as a Non-Food Chemical Canadian and NFS recognition letters available on request.

The 5-ounce Chemtronics ES835b incorporates the Trademarked BrushClean System of removing fluxes quickly and easily. Remove harmful residues in Tight Tolerance Areas. Removes ionic and non-ionic activators while removing all rosin-based fluxes.. RoHS-Compliant flux remover is Safe on Plastics. Removes all rosin-based fluxes as well as RMA, RA and synthetic fluxes. Removes ionic and non-ionic activators. Product dries fast and leaves no residue. Convenient All-Way Spray valve - even sprays upside down Available with BrushClean System. Suggested Applications cleans type R, RMA, RA and Rosin-based no-clean flux.. The Low-Odor ES835b Leaves No Residue and Contains No CFCs or HCFCs.. Flux-Off Rosin is generally compatible with most materials used in the electronics industry. With any cleaning agent compatibility solventcomponent must be determined on a non-critical area prior to use.. Typical Applications Flux-Off Rosin removes flux residues and cleans Chip Carriers Heat Sinks Plugs Printed Circuit Boards Relays Sockets Surface Mount Device Pads Switches.

Epa snap approved. Non-ozone depleting. Safe on most plastics. Zero residue. Rapidly evaporating.