Top 6 Best Fuel Line Yiuiy

APPLICATION- Diesel, biodiesel, gasoline, oil, water, coolant and others for automotive, marine, cars, trucks and buses, etc. Black NBR fuel line can be used in fuel system, oil cooling, steam emission and PCV system, please check the pressure of application before perchase.. WORKING ENVIRONMENT-Working Pressure 300psi2Mpa. Burst Pressure 1160psi8Mpa. Temperature Range -40F to 257F. Minimum Bend Radius 4.7 120mm.. SIZE- length5 feet. Inner diameter38 10mm,Outer diameter58 16mm.. MATERIAL- Made of high quality NBR rubber and nylon. The NBR fuel lines are more flexible and more cost-effective.. NOTE- Professional installation is highly recommended. Please use hose barbs and fuel hose clips specifically for NBR hoses as adapters..

APPLICATION- For racing fuel, pump gas, diesel, motor oil coolant etc. Nylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.. WORKING ENVIRONMENT-Maximum Working Pressure725psi5mpa. Bursting Pressure2465psi17mpa. Working Temperature Range-40 to 338-40 to 170.. SIZE- length20 feet6M. Inner diameter0.56 inches 14.2 mm. Outer diameter0.79 inches 20.10 mm.. MATERIAL- Inner layerCPE synthetic rubbermiddle layer304 stainless steel wire mesh sleeveouter layerbraided nylon. Resistant to high temperature pressure abrasion and aging. Excellent flexibility and flame retardancy.. NOTE- Double check the hose size before bidding. Our rubber hose is compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT.NOT FIT FOR E85..

APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications.. WORKING ENVIRONMENT-Maximum Working Pressure725 psi5 mpa. Bursting Pressure2175psi15 mpa. Working Temperature Range-40 to 392-40 to 200.. SIZE- length20 feet. Inner diameter0.64 inches 16.26 mm. Outer diameter0.76 inches 19.3 mm.. MATERIAL- Inner layer PTFE Teflon rubber middle layer 304 stainless steel wire mesh sleeve outer layer braided nylon. PTFE fuel lines are more resistant to high temperature and pressure.. NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Package includes the following 4 different size fuel line hose,Please undetand that there maybe 1-3 cm dimensional deviation due to manual measurement.. The Size of small engine fuel lines I.D. x O.D .080 x .14, overall length 4 feet I.D. x O.D 332 x 316, overall length 4 feet I.D. x O.D 18 x 316, overall length 4 feetI.D. x O.D 18 x 14, overall length 4 feet.. Fuel lines will degrade over time and these replacements are perfect for bringing your small engines back to life.High-quality petrol fuel line kit - oil, gas and corrosion resistant.. These Weed Eater Fuel Lines Can be easily cut to length and bent easily to fit onto barbed connections,Widely used in all brands' small engine fuel system repairs.. Hipa fast flow fuel line replacements are tailor-made to fit your small engine carburetor for the easiest possible connection to your fuel hose and pump. With high flexibility, Hipa's small engine fuel line reduces the risk of failure due to cracking and leakage and simplifies installation.. Save yourself the hassle of returns and exchanges by double-checking your engine's model number and part number before ordering any parts..

Compatible withOnly fit for all braided CPE fuel lines and they are NOT work with PTFEE85rubber hose.. Superior QualityThe aluminum alloy hose fitting end is made of lightweight 6061-T6 and coated with black penetrates aluminum,which make the fitting end strong strength anti-corrosion,anti-rust,durability and stay a long service life.They can be reused but need to replace the olive insert.. Reused useThe swivel hose end are easy to install without any complex modification and special equipment.Lube can help prevent any galling and adjustable AN wrench is needed to make the installation easier during the inatallation.The swivel hose can be recycle and reused.. Precision Craftsmanship CNC Machined billet aluminum anodized make the fitting have superior thread strength.37angled leak-free seal and weld-free construction make fluid flow and connection over the hose better.. Widely ApplicationThe swivel hose end fittings can work in the maximum 1000PSI pressure and the working temperature from -65F to 252F-53-122.They are widely used in Fuel OilWater FluidAirline and so on.They are also widely used to connect oil gas line clutch hosebraided fuel lineturbo line and so on..

Parameters Thread Size of 8AN PTFE Fittings are 34-16UNF. Working Temperature -76 to 446-60 to 230. Max Working Pressure 3000PSI.. For PTFE Hose Only work with 8AN PTFE nylon or stainless braided hoses. Not compatible with CPE or rubber hoses.. For Most Fluids The hose end fittings can be used with all oil, fuel, water and other fluid, especially E85 ethanol.. High Quality The fittings are made of lightweight 6061-T6 aluminum alloy with superior thread strength. Anodized and polished for increased resistance to oxidation and corrosion.. Installation When installing the adapter, if it is difficult to plug in, you can heat the pipe to make it easier to install..

4 DIFFERENET SIZE I.D x O.D 0.08 x 0.14 2mm x 3.5mm, 18 x 14 3mm x6mm,18 x 3163mm x5mm,332 x 316 2.5mm x5mm. PREMIUM QUALITY MATERIAL Oil and gas resistant, corrosion resistant. Excellent quality of polyurethane tygon. In low temperature environment, the fuel line still can maintain normal working conditions.. EXTRA LONG 4 Feet Long Fuel Line Fuel Hose Fuel Tube.. PERFECT REPLACEMENT Perfect replacement fuel line Set for chainsaws, blowers, weedeater whackers trimmers and other engine machines. Fits for most 2 cycle small engines, for primer line and return line.. BUY WITH CONFIDENCE QQ GROUP US INC is a US based company and customer service. Rest assured you get the best service and support.

4 DIFFERENET SIZE I.D x O.D 0.08 x 0.14 2mm x 3.5mm, 18 x 14 3mm x6mm,18 x 3163mm x5mm,332 x 316 2.5mm x5mm. PREMIUM QUALITY MATERIAL Oil and gas resistant, corrosion resistant. Excellent quality of polyurethane tygon. In low temperature environment, the fuel line still can maintain normal working conditions.. EXTRA LONG 4 Feet Long Fuel Line Fuel Hose Fuel Tube.. PERFECT REPLACEMENT Perfect replacement fuel line Set for chainsaws, blowers, weedeater whackers trimmers and other engine machines. Fits for most 2 cycle small engines, for primer line and return line.. BUY WITH CONFIDENCE QQ GROUP US INC is a US based company and customer service. Rest assured you get the best service and support.

ADVANCED MATERIAL Made of high-quality NBR material,highlow temperature and oil resistant,durable. Size 516 inch8mm id,916inch15mm od, 10 feet, Temperature Range -40F to 257F -40C to 125C Max Working Pressure 300PSI.. Good Quality Durable Good retardancy and excellent corrosion resistance. More durable and resistant to alkali, weak acid and alcohol,withstand multiple uses stably.. MULTIFUNCTIONAL Ideal for conveying gasoline, diesel, engine oilFor use in mowers tractors steam emission snow blowers dirt bikes and just about all small engines.. MULTIPLE CHOICE There are various lengths and sizes available, you can choose according to the actual use,Please check the pressure of application before purchase.. GOOD SERVICE Our aim is to provide durable tube. Any questions, please feel free to contact us, I will provide solutions within 24 hours..

Widely ApplicationThe PTFE Fuel Line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications.. High-quality MaterialThe 6AN 20FT Fuel Lne Kit is made of high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use.. Work ConditionThe Stainless Steel PTFE Reinforced Hose Working temperature range -76 to 446 -60 to 230. Max working pressure 3000psi. Bursting pressure 10000psi. Please check the working pressure before ordering.. Super PerformanceThis hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. Package IncludeThe 6an fuel hose comes 1 6AN E85 20FT Braided Nylon Stainless Steel Fuel Injection line Hose. Professional Installer is Highly Recommended. Recommended to Use Adjustable AN Wrench. If you have any questions, please feel free to contact us..