Top 6 Best Gps Module

Car positioning in navigation. Mobile phones, tablet PCs, handheld devices. Embedded positioning device. Wearable device.

How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use. Note Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning. GPSBaud needs to be set to 9600 instead of 4800 PPS pin is not needed unless using the GPS to drive a hardware high precision clock GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.

With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned. GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna. If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..

Wide range of use for APM flight control, PIX flight control, PX4 flight control The outlet terminal is directly compatible with the APM serial port and I2C port. Plug and play other flight controllers are also available, such as MWC flight controller.. Main chip U-B-LOX M8030 KT Built-in TCXO, which maintain good consistency in the temperature of -40 85 Tracking channels 72 Three in one Function Support GPS BDS dual-mode positioning, plus compass chip Let you realize the desire of one module can be used in many ways. Positioning Auto-positioning 2.5m in average Auxiliary positioning 2m average, with SBAS assistance Drift 0.02m s Timing accuracy 60ns Reference coordinate system WGS-84 Maximum altitude 50000 meters Please pay attention to atmospheric Temperature during high-altitude flight, and please open the flight mode Maximum speed 500m s Acceleration 4g.. Three in one Function Support GPS BDS dual-mode positioning, plus compass chip Let you realize the desire of one module can be used in many ways.

GT-U7 module, with high sensitivity, low power consumption, miniaturization, extremely high tracking sensitivity, large coverage, high precision positioning under the narrow urban sky and dense jungle environment. Compatible with NEO-6M 51 MCU STM32. Distribute active ceramic antenna for fast positioning. The module comes with LED signal indication and data backup battery. Working voltage 3.6V-5V or use Micro USB to directly supply power.

BN-880 is suitable for Open source flight controller, not for flight control with SCM. Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L. Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. When you use it for Raspberry Pi, there is no driver needed but you need to install software.

New upgraded 10th generation chipWith compass Suitable for FPV fixed-wing UAV. Quickly completesatellite searchSupport GPS, Galileo, BDS three-mode positioning, fast positioning in any area. Stable signalCarefully modulated ceramic antennaand external expansion PCB. Can effectively receive satellite signals. With QMC 5883 compassQuickly identify the directionAccurate positioning. Small and exquisite21mm x21mm size, Only 7.73g weight.

Using the new 10th generation for UBLOX chip design, fast and accurate positioning. Small size, compatible with 2-7 inch traversal Drone on the market. Selected ceramic antenna and externally expanded PCB design to effectively receive satellite signals. Support GPS, for Galileo, BDS three-mode positioning, fast positioning in any area. Onboard POWER and PPS indicator lights, the working status is clear at a glance.

BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.. When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.. Data Level TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click Ask a question to em-ail us.