Top 6 Best Hard Drive Reader Universal

Supported HDDSSDFIDECO IDE and SATA adapter is compatible with 2.53.5 SATAIDE hard drives. It can support the connection of 3 hard drives simultaneously one 2.5 IDE, one 3.5 IDE, one 2.53.5 SATA.. Compatible SystemFIDECO hard drive reader is widely compatible with Windows, Mac OS, and Linux. Just plug and play No driver or software is needed. Maximum 5Gbps Super SpeedFIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. It can be also backward compatible with USB 2.01.1. Data transfer has never been so much easier and faster.. Easy Set-upSimply insert your hard drive, connect the power adapter and USB cable, and then turn on the device by pressing the power switch. Note For 3.5 IDE HDD, you need to connect the 4-pin power cable.. Warm NoteFor new hard drive, please go to Disk Management to initialize it first, and then your hard drive can be recognized. If 2.5 and 3.5 IDE hard drives are connected simultaneously, you need to set jumper. The default master is 2.5 IDE hard drive, so you need to set jumper for 3.5 IDE hard drive and set it to slave..

Universal USB to SATAIDE Adapter Supports 2.53.5 SATA HDD and SSD, 2.53.5 IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVDRW Optical Drive,two IDE connector Plus one SATA III connector.. Works with up to 3 HDDs This USB 3.0 to IDE and SATA adapter is equipped with a SATA III connector and 2 IDE connectors one 2.5 and one 3.5. It allows users to operate 2 HDDs One IDE and One SATA simultaneously. Its compatible with 2.53.5 IDESATA hard drives.. High Speed Transfer Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.01.1.. Support Systems Windows 11XPVista781032bit and 64bit Mac OS 10. X.. Additional Functions Plug and play support hot swap onoff switch for HDD protection. Led light shows power and activity status..

Universal IDE SATA to USB 3.0 Adapter Hard drive reader support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer. SuperSpeed up to 5Gbps IDE to USB adapter supports a 5Gbps high-speed transfer rate up to 10x as fast as USB 2.0, which is 70 Faster than traditional USB 3.0 and 80 reduction in required processor resources, Backward compatible with USB 2.0 1.1.. Broad Compatibility External hard drive to usb adapter support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux, etc. Support devises PS4Xbox, Plug Play, No Drivers Needed NDN for multiple OS. Huge Capacity Supportive Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and activity status.OnOff power Switch for Hard drives protection. Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turning on the disk. Comes with Power Supply OTG Adapter The 2 Amp 12 Volt power supply is helpful to be sure you've got enough power for mechanical motors of 3.5 spinning and 5.25 optical drives.4 pin Molex power for a 3.5 IDE drive, USB-C to USB adapter can be plugged into a USB C port to match your laptop.

Universal Hard Drive Adapter SATA IDE to USB adapter allows connect your SATA IDE device to computer as an external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. This is a perfect tool to duplicate, copy, backup, or transfer large amounts of data from one drive to another.. Transfer Rate up to 5Gbps SATA to USB 3.0 adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, backward compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected .. Wide Compatibility Hard drive to USB adapter support Operate Systems Support Windows XPVista7 88.110, Mac OS 10 or higher, Linux. Compact body design, Support Plug, and play hot swap, OnOff power Switch for Hard drives protection.. Support Hard Drives Capacity up to 6TB Hard drive adapter has a SATA III connector and two IDE connectors 40pin and 44pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk.. Included 12V 2A Power Supply USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for power up the 5V12V IDE devices usage, ensures SATA HDD can be connected well. 4pin power cable is designed for a 3.5 IDE drive LED light shows power and activity status..

IDESATA Hard Drive Adapter IDESATA adapter has a SATA connector and two IDE connectors 40pin and 44pin, allows you to connect 2.53.5 IDESATA hard disks through USB A or USB C port to the computer. USB A Type C Plugs The USB to IDE SATA converter is designed with type A and C plugs that can fit in most of the devices, compatible with variety MacBook Pro, Mac air, iMac, Surface Pro, Dell, HP, computer, laptops and other devices. Support Huge Capacity USB hard drive adapter supports up to 12TB capacity. The LED indicator of the USB to SATA SDD adapter can monitor the working status. Plug and play, Easy to use. Two Drives Simultaneously This USB SATA adapter enables access to 2 HDD drives simultaneously or file transfer among the 3 drives. It supports 2.5 3.5 Sata HDD and SSD 2.53.5 Ide HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW. Package Contents BYEASY SATAIDE to USB AUSB C Adapter, 3.3ft Hard Drive Cable, 12V 2A Power Adapter x1, 4PIN Power Cable x1, User Manual and 1-year friendly customer service.

Universal Hard Drive Recovery Converter- Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVDCD-ROM, CDDVD-RW Optical Drive, you can easily connect your hard drives through a USB port as an additional external hard drive to read backup data, operate formatting hard drives, and transfer files. SuperSpeed Transfer up to 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1. supports UASP. which is 70 Faster than traditional USB 3.0 and a 40 reduction in required processor resources. 6TBHuge Capacity Supportive Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. external hard drive reader has a SATA III connector and two IDE connectors 40-pin and 44-pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk. Wide Compatibility Hard drive to USB adapter support hot-swapping. universally compatible with Windows 10 8.1 8 7VistaXP, Mac OS 9 10, Linux work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. When connecting two IDE hard drives, please set the master drive and slave drive based. Additional Functions Plug and play support hot swap onoff switch for HDD protection. Led light shows power and activity status, Included 12V 2A power cable is for providing a stable electricity supply. The 4-pin Molex connector is specifically to power a 12-volt IDE drive when connected. and also Comes with a USB C to USB Adapter, which perfectly matches a MacBook ProMacBook AirChromebookother laptops with a USB Type-C port.

3 in 1 Hard Drive Converterthis SATA IDE to usb adapter designed for all 2.5 or 3.5 inches SATA or IDE hard drives. You can use this hard drive reader universal to simultaneously connect 2 HDDs for data transfer - IDE SourceSATA2 Target, SATA1 SourceSATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously.. One-click Backupthis hard drive ultra recovery converter can support offline backup. No computer is needed Just press the Backup button for 3 seconds until the first blue light 25 flashes. You can operate offline backup only in 2 combinations IDE SourceSATA2 Target SATA1 SourceSATA2 Target. Capacity requirement SATA2 Target IDESATA1 Source.. 5Gbps Data Transfer RateThe hard drive recovery converter is designed with USB 3.0 port, which can provide data transfer speed up to 5Gbps 10 times faster than USB 2.0. Transfer large files in seconds It is also backward compatible with USB 2.01.1.. Wide Compatible Systemsthis external hard drive adapter with great compatibility, such as Windows 1088.17VistaXP, Mac OS, Linux, Chrome OS and ect. No need to install additional drivers, plug and play, very convenient. What You GetPackage comes with 1 x hard drive USB adapter , 1 x USB 3.0 A female to A female Cable, 1 x 12V2A power adapter, 1 x USB C to USB adapter , 1x User's Manual. YINNCEEN provides 12 months free worranty for our customers, if you have any question, feel free to contact us at any time and we will get back to you as soon as possible..

Multiple Drive Compatibility The hard drive reader can be used with both SATA and IDE hard drives, and can support multiple types of drives such as 2.5-inch and 3.5-inch SATA or IDE HDDs, CD-ROMs, CD-RWs, DVDs, and DVD-RWs. It can support the simultaneous connection of 2 HDDs for retrieving old files, backup, cloning, and upgrading for a speedy transfer. One-Touch Backup Function No computer is needed Hard drive recovery converter can support offline clones. making the backup process easier and more convenient than ever before. Just press the CLONE button for 3 seconds until the first blue light 25 flashes. You can operate offline clones only in 2 combinations IDE SourceSATA2 Target SATA1 SourceSATA2 Target. Capacity requirement SATA2 Target IDESATA1 Source. 5Gbps High-Speed Data Transfer A SATA IDE to USB 3.0 adapter is designed to offer high-speed data transfer between a SATA or IDE hard disk drive HDD and a device with a USB 3.0 port. The adapter typically supports data transfer speeds of up to 5Gbps.. Easy to Use This hard drive transfer kit is easy to use, you simply plug your SATA or IDE HDD into the adapter and plug the adapter into your device's USB 3.0 port. The adapter comes with a 12V 2A power adapter to provide the necessary power to run the 3.5 drives. the adapter is compatible with SATA drives up to 6 TB. System Compatibility You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10 8.1 8 7VistaXP, Mac IOS, and LINUX just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required, Warm NoteFor new HDDSSD, please go to Disk Management to initialize it first, and then your HDDSSD can be recognized..

2.5 SATA to USB Adapter Compatiable with 2.5 SATA SSDHDD sata cable supports 6TB hard drives,which is a perfect solution for backup processing IT data, batch processing data, formatting, file transfers etc. Please Note It does not support recover data from older hard drive. Super Speed USB 3.0 PortData transfer rates of this sata to usb 3.0 converter up to 5Gbps with UASP accelerated you can experience transfer speeds up to 70 faster than conventional USB 3.0, when connected to a device that also supports UASP Backward compatible with USB 2.01.1. Pulg PlayTool free installation, quickly connect 2.5 inch SATA HDD to a USB port. Just plug this into the device and you're good to go This sata to usb cable featured with led light, can shows the working status easily,Red Light Power status Blue Light Activity status. Support Auto-sleep mode. Compact and PortableThe hard drive reader designed with detachable converter and cable. It's as portable as possible and tucks easily into the pocket of your laptop bag The interface is not easy to damage the line, which efficently prolongs the span life of the product. Wide Compatiability Support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux etc. Support devices PS4XboxTVmonitoring equipment. Does not support 3.5 hard drive, not compatible with ATAIDE, MSATA, and M.2 interfaces. Please confirm your hard drive type before purchase.

Universal Hard Drive AdapterSATA to USB 3.0 adapter allows your hard drive connect to USB-A equipped devices including laptop, tablet, desktop, HDTV, router and more. Compatible with most SATA 2.5 HDD SSD and 3.5 HDD. Works with Western Digital, Seagate, Fujitsu, Samsung hard drives.. High Speed USB 3.0 with UASPUSB 3.0 type A supports data transfer up to 5Gbps, backward compatible with USB 2.01.1. With UASP technology accelerated, when connected to a computer that also supports UASP, it can read and write faster than conventional ones.. 2 x 18TB Capacity Offline CloneDual SATA connectors enable access to 2 hard drives simultaneously, supports each capacity up to 18TB, total 36TB. Supports one-click offline cloning, no need to connect to a computer. Just press the clone button to backup files from one to another.. Wide CompatibilityWidely compatible with most of systems, such as Windows 10 8 8.1 7 Vista XP, Mac OS 11 10 9 or later, Linux, Chrome OS etc. Lightweight and compact design, easy to carry on the go.. Hot-Swap, Plug and PlayEasily connect with your SATA HDDSSD, no extra drivers needed. You will get 1xUSB-3.0 to SATA adapter, 1xpower adapter, 1xuser manual and 1-Year worry-free warranty..