Top 6 Best Heatilator Remote Control

Convenient Design - The battery powered R. F. transmitter gives wireless remote control to a gas fireplace. Easy to Read - Crystal clear LCD screen displays 24-hour clock, and room temperature in degrees Fahrenheit or Celsius flame icon will appear to indicate appliance is on, a low battery indicator will be displayed when the transmitter's batteries are running low. Easy to Use - 5-Button UP DOWNMODESETTIMERTIME interface provides simple control of a connected fireplace TIMERTIME cycles control between manual and timer mode and also sets the 24-hour clock, while SET adjusts temperature setting in thermo mode. Timer Control - Timer feature allows the user to set a desired amount of time the fireplace will operate countdown timer can be set up to a maximum time of 9 hours. Thermostat Control - Thermostat feature operates the fireplace whenever the room temperature swings 2 F above or below the set temperature. Plug-In Design - UL Listed 110v receiver with learn function and 18 inch wires with connectors can learn up to 2 additional Skytech remotes also allows manual control of fireplace with OnRemoteOff settings. Includes - Transmitter remote, receiver box, wall clip, wires with connectors, batteries, and instruction manual.

Heat N Glo RC300 Multifunction Remote for Heat N Glo, Heatilator and Quadra-Fire Gas Units. Original HHT Parts. No Generics. Equipped with thermostat functions which can automatically control the temperature in the room in which it is installed. The control is only for use with the Hearth Home Technologies IntelliFire Plus system IPI. Rated for 120 VAC, 60HZ and is required for operation of this remote control device. Contact us to verify compatibility..

110V AC Remote Control Thermostat. Factory replacement for SMART-STAT-HNG, SMART-STAT-HTL and SMART-STAT-MAJSpecifications. Voltage 110V AC. Satisfaction Ensured.. Produced with the highest grade materials.

Convenient on and off control of your gas log set. Compatible with vented or vent free logsets, APK-10, APK-11 and EPK-1 ignition valves. All battery operated - R.F. - NO POWER NEEDED Works in a power outtage. Snap-on wall plate and 18 wires with connectors for easy wall switch installation. Receivers will learn up to TWO additional Skytech transmitters so you can have multiple remotes. Ultimate convenience of a cozy fire with the push of a button.

Receiver Plugs into standard 110-120 VAC receptacle, Flip cover to protect 6-button controls. LCD display room temp. in F or C, Thermostat setting, Fan Speed Control, Flame Height Control. All Skytech batteries and wall holder included, 9-hour countdown timer and 24-hour clock. Flame icon and low battery indicator.

Original Skytech Remote. No Generics.. Batteries and wall holder are included. Fireplace Remote Control. Smart Stat IIIII. Please note that Smart Stat II and III are the same units and there is no difference between the two.. This Skytech Smart Stat IIIII fireplace remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The system can be operated thermostatically or manually from the transmitter. The system operates on radio frequencies RF within a 20' range using non-directional signals. The system operates one of 1,048,567 security codes that are programmed into the transmitter at the factory the remote receiver's code must be matched to that of the transmitter prior to initial use..

7-button control for operating the Heat N Glow and Robertshaw Valve System. LCD displays room and thermostat set temp, a 24 hour clock and a 9-hour countdown timer. Receiver plugs into standard 110-120 VAC outlet underneath the fireplace behind access panel. Flame height, fan speed, thermostat and manual operation. Includes transmitter, receiver, wiring, wall clip, installation instructions, batteries.

All battery operated receiver and transmitter. Flip cover to protect 4-button controls. LCD display room temp. in F or C, 1,048,576 security codes. Programmable thermostat setting, All Skytech batteries and wall holder included. 9-hour countdown timer and 24-hour clock, Flame icon and low battery indicator.

HHT Replacement Wall SwitchKeypad for gas stoves and inserts. Can be used on LP and NG. OEM Part.

OnOff Control.