Top 6 Best In Home Water Pressure Booster

SHALLOW WELL JET PUMP Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-14 FNPT suction intake and 1 FNPT outlet discharge 1 HP pump can draw up to 23 gallons per minute. BUILT TO LAST Rugged cast iron casing and volute for long life and high-efficiency glass-filled thermoplastic impeller and diffuser for durability. HEAVY DUTY MOTOR runs on either 115 or 230 volts voltage must be selected to match incoming power source Includes a capacitor for increased starting power CSA listed in USA and Canada. INCLUDES a factory pre-set 3050 pressure switch that produces a working maximum pressure of 50 PSI and pressure gauge. SPECIFICATIONS 1 HP, 17.6 Amps at 115 Volts 8.8 Amps at 230 Volts 1-14-inch FNPT intake 1-inch FNPT discharge Max Pressure 65 PSI Max Head 150 Ft..

BUILT TO LAST Rugged cast iron pump housing and glass-filled thermoplastic impeller for well water and lake water. DUAL VOLTAGE MOTOR 115230 Volts pump is factory set at 230 Volts but can be easily switched to 115 Volts always match the pump's voltage to the source voltage. ONE-TIME PRIMING No additional priming is required after initial fill follow the priming instructions in the owner's manual. UP TO 71 GPM at 10 PSI 44 GPM at 30 PSI - can handle up to 14 sprinkler heads with 12-inch fittings or 7 sprinkler heads with 34-inch fittings in each zone. SPECIFICATIONS 1.5 HP, 115230 Volts, 2-inch Female NPT threaded intake 1.5-inch Female NPT threaded discharge, Max pressure 44 PSI.

Powerful 34 HP Pressure Booster Pump includes 6-foot 115-volt power cord. Works as needed auto-activation when water runs. Rust and corrosion-proof stainless steel. Already set-up and ready for installation. Provides up to 40 PSI of additional pressure.

Pressure Boost 80 psi 40 psi at 20 gpm. Stainless Steel Impellers and Pump Casing. Power Surge Protected TEFC Moto. Dry-Run Protected. Flexible SS FIP Discharge hose.

Pressure Boost 50 psi 30 psi at 20 gpm. Stainless Steel Impellers and Pump Casing. Power Surge Protected TEFC Motor. Dry-Run Protected. Flexible SS FIP Discharge hose.

Homes where the incoming municipal water supply pressure is inadequate. From underground or surface water supplies. Automatic water transfer. Applications where the pump may have an interrupted water supply. Domestic and light industrial irrigation.

Pressure Boost 57 psi 45 psi at 14 gpm. Stainless Steel Impellers and Pump Casing. Power Surge Protected TEFC Motor. Dry-Run Protected. Flexible SS FIP Discharge hose.

Simple operation. Starts automatically with water demand. Automatic run dry protection. Variable pump cut-in pressure. Very quiet 65 dB.

Multi-stage Design Provides steady, quiet, vibration free, operation. O-Ring Casing Seal Reliable high pressure sealing with easy disassembly for maintenance or repair. Motors Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available. 60 Hz, 3500 RPM. Single phase motors have built-in capacitor and overload with automatic reset.

1115 Volt Water Pressure Booster Pump,1 User Manual,2 12 Barbed Hose Adaptors,1 12 Male Thread Hose Adptor, 1 Filter Out Debris. The Booster Pump,55 PSI Pressure Setting, Strong Output up to 5 GPM. The Electric Water Pump is 115 Volt, AC Power, Can Simply Plug into Any Standard Wall Socket in The House, a Great Water Pressure Booster Pump for Home. The Water Booster Pump Works with a Pressure Switch,it is Automatic, It Starts if The Tap is Turned On, It Stops if The Tap is Turned off.. The Bypass Switch Built into The Demand Pump Greatly Absorb Vibration, No Need to Worry About Frequent StartsStops When the Flow is Small, It Ensures the Water Pump Works More Smoothly.

Flow range up to 35 GPM. 230 Volt single phase. 1.2 horsepower. 1-14-Inch FNPT inlet and outlet. 60 psi max incremental pressure boost.

Pressure Boost 38 psi 30 psi at 14 gpm. Stainless Steel Impeller and Pump Casing. Power Surge Protected TEFC Moto. Dry-Run Protected. Flexible SS FIP Discharge hose.