Top 6 Best Klein Outlet Tester

LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results. TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning. DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open neutral and ground, reversed hotground, and reversed hotneutral. AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets. SAFE AND DURABLE TESTER for inspections on North American 120V outlets. BRIGHT LED LIGHTS illuminate green and red for visual indicators. TRUSTED SAFE with a safety rating of CAT II 135V.

This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected. GFCI tester consists of two parts a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker. Receiver delivers clear visual and audible indications when the correct breaker has been located. Operates on 90-120V AC circuits. Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices. Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use. Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets.

GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. Works on GFCI outlets and confirms operation of the ground fault protective device. Built to withstand a 6.6-foot 2m drop. Operating temp 32-Degree to 140-Degree Fahrenheit 0-Degree to 40-Degree Celsius. Nominal Voltage 110125V AC at 5060Hz in 3-wire outlet.

GFCI Tester detects the most common wiring faults in standard, AFCI, and GFCI electrical outlets. Test AFCI devices by simulating arc fault conditions. Test GFCI devices by simulating ground fault conditions. Capable of detecting a dual-open wiring fault with simultaneous open neutral and open ground wires patent pending technology. Tester delivers clear visual indication of the wiring condition at the electrical outlet. Designed to test North American-style grounded electrical outlets in 120V AC circuits incorporates a three-pin plug. Electrical plug is on a 10-Inch 25.4 cm flexible electrical cord to access electrical outlets in difficult to reach locations.

OUTET TESTER TOOL KIT - GFCI Tester and Non-Contact Voltage Tester Pen. GFCI OUTLET TESTER Cat. No. RT210 detects common wiring problems in standard and GFCI receptacles. CONFIRMS OPERATION of the ground fault protective device and works on GFCI outlets. NON-CONTACT VOLTAGE TESTER PEN Cat. No. NCVT1P provides non-contact detection of voltage 50 to 1000 Volts. CAT IV 1000 Volt SAFETY RATING provides expanded operation and protection. LED LIGHT illuminates and a warning tone sounds when voltage is detected. POWER BUTTON - Discreet digitally controlled ON OFF power button.

Outlet tester's light sequence on receptacle tester indicates correctincorrect wiring. Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 160. Operating temp 32-degrees F to 140-degrees F 0-degrees C to 40-degrees C. Built to withstand a 6.6-foot 2m drop. Nominal Voltage 110125V AC at 5060Hz in 3-wire outlet. Designed to detect the most common wiring problems in standard receptacles.

NON-CONTACT DETECTION of AC voltage in cables, cords, circuit breakers, lighting fixtures, switches, non-tamper-resistant outlets, and wires Cat. No. NCVT1P. VISUAL AND AUDIBLE INDICATORS of voltage detection with a high intensity, bright red LED, and an audible tone Cat. No. NCVT1P. GFCI TESTER DETECTS most common wiring problems in standard and GFCI receptacles Cat. No. RT210. CONSERVE BATTERIES with auto power-off function. ELECTRONIC VOLTAGE TESTER is designed to test AC voltages from 24 to 240 VAC at four useful levels Cat. No. ET45.

Kit contains a non-contact voltage tester and receptacle tester. Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage 48-1000V AC. NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires. NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access. CAT IV 1000 Volt rating provides expanded operation and protection. Screw-thread battery cap with O-ring ensures protection against dust and water ingress for the NCVT-2P. Receptacle Tester is designed to detect the most common wiring problems in standard receptacles.

GFCI Receptacle Tester features a large backlit LCD readout of voltage, and clear indication of wiring conditions. LCD readout shows the time required to trip a GFCI device. Patent pending detection of Open Neutral Open Ground wiring fault. For use on 3-wire, North American 120V electrical outlets only. Non contact voltage tester's dual-range detects from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.

BEST SELLERS in convenient kit include three testers with leads for electrical test and measurement applications Digital Multimeter, Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester. VARIETY OF FEATURES on the Digital Multimeter MM320 measures up to 600V ACDC voltage, 10A DC current and 2MOhms resistance also tests batteries, diodes, and continuity. DUAL-RANGE TESTING CAPABILITIES allow Voltage Tester NCVT3P to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications. DETECT WIRING CONDITIONS on GFCI Receptacle Tester RT250 which features a large backlit LCD readout of voltage, and clear indication of wiring conditions, with patent pending detection of Open Neutral Open Ground wiring faults. CIRCUIT BREAKER FINDER quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.