Top 6 Best Laminate Floor Cutter Tool

WIDE CUTTING RANGEThe size of the board can reach 13 wide and 16 mm 58 thick. The materials that can be cut including LVT, VCT, SPC, LVP, WPC, Vinyl Flooring , Engineered Hardwood,Rubber and more.. GOOD QUALITY MATERIALSThe blade is made of HSS High Speed Steels and features High Hardness, Wear Resistance, and Heat Resistance. The material of the panel is ABS Acrylonite Butadiene Styrene, which has High Strength, Good Toughness, and strong LOAD-BEARING capacity.. EASY TO USEThis vinyl floor cutter only needs to be assembled with screws,no other tools required. It has equipped several additional screws to prevent loss or damage, which can be replaced.. LABOR SAVING USER-FRIENDLYHandle for increased leverage with effortless. No Electricity. When you need to move it, you can hold the integrated handle on the panel and lift it up.. CUSTOMER FIRST Komsepor are committed to providing you with the best customer support. Any problems in use, just contact us and your problem will be solved within 24 hours.

The MARSHALLTOWN Ultra-Lite Flooring Cutter 13 is essential for your next vinyl, laminate, or engineered hardwood flooring installation. Cuts products up to 13 wide, 12 mm thick, and a Janka hardness of 1200. At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity. Unique features include a movable aluminum fence for precise, repeatable 45-degree cuts, 90-degree cuts, and an integrated handle for easy, single hand carry. This product is proudly made in the USA with global materials.

For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC, Vinyl Flooring and more up to 13 wide and 16mm 58 thick.. Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. Installation Kit with Tapping Block, Pull Bar and Spacers With 20 Spacers. If you use it for business purposes, make sure you have a replacement blade. The general floor width is 8 inches, and only about half of the blade is used for each cut. When this side of the blade becomes dull, the floor can be moved to the other side of the workbench and work with the other half of the sharp blade, a complete double Supported worktable provides smooth, wobble-free and quiet cutting.This configuration, 159.9 is a unique price on the market, and it is a great value for money. 37-14 Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use. Item Weight 18.7 lbs, DIY For Household and Business, Strong and Durable Preferred for business. Blades are consumables. If the whole cutter is damaged due to improper operation, it will not be covered by the one-year warranty..

The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting irregular cornersmost of which are columns, door edges and wall corners. It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time. Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.. Replacement blade can be got at the online official brand store MANTISTOL.. Why does the floor you cut crack Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.If you want to cut it,Each cut can only cut 116 inch, which is equal to that each cut is the upper surface of the floor. requires some skills and control your strength. 13 cutting width and 8mm cutting depth. Straight cut, Angle cut L cut, Rip cut and more. Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm4.5inch.Easy to use and to carry around..

The blade of our cutters can be moved. There are many complex scenes on the construction site that need special cutting irregular cornersmost of which are columns, door edges and wall corners. It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time. Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.. Replacement blade can be got at the online official brand store MANTISTOL.. Why does the floor you cut crack Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder Floor cracks occur when at least two or more cuts are required to make long cuts and corner cutsIf you want to corner cuts it,Each cut can only cut 116 inch thickness approximately 3 inches cutting length, which is equal to that each cut is the upper surface of the floor. requires some skills and control your strength. 8.9 cutting width and 8mm cutting depth. Straight cut, Angle cut L cut, Rip cut and more. Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm4.5inch.Easy to use and to carry around..

The MARSHALLTOWN Ultra-Lite Flooring Cutter 9 is essential for your next vinyl, laminate, or engineered hardwood flooring installation.. Cuts products up to 9 wide, 12 mm thick, and a Janka hardness of 1200.. At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity.. Unique features include an integrated handle for easy, single hand carry.. This product is proudly made in the USA with global materials..

Product Type Tools. Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board Hardieplank , Cemplank , Engineered Wood And Vinyl Siding Up To 13 Wide And 1932 Thick. Compact And Easy To Use Produces Clean, Precision Cuts With No Splintering And Smooth Finish. Sturdy High-Quality Steel And Aluminum Construction.

CUTS WIDE RANGE OF FLOORS Cuts up to 13 or 330mm Width, Up to 58 or 15.80mm Thickness on Engineered Wood Floor, VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor, Vinyl Plank Floor and Rigid Core Vinyl Plank, also Cuts PVC Tile, Vinyl Tile, Fiber-Cement Board Siding, Vinyl Siding, Pressboard Lap Siding, Carpet Tile, Leather, Rubber Base, Rubber Tile, Soft Plastic. OUTSTANDING VALUE No Dust, No Noise, No Electricity Needed, Easy and Professional Cutting on Vinyl Floor, NO Go Out and In House, NO Go Up and Down Stairs, Time and Labor Saver.. SAFE OPERATION Includes CUTTEREX Knee Pads, Stay Protected, Stay Safe Dust Free, Quick Quiet. Long Handle for More Cutting Power Made Operation Easy.. CUTS MOST SHAPES ON FLOOR Straight Cut and Cuts at 0-45 Free Angles. STURDY STEEL AND ALUMINUM CONSTRUCTION Plus Angle Indications on Support Table, Integrated Straight Cutting Fence.. COMPACT DESIGN AND LIGHT WEIGHT Easy to Carry and Move Around..

BONUS installation Kit and double-sided honing stone included Designed to cut laminate, solid wood and engineered flooring up to 15mm 58. will also cut vinyl tile and fiber cement siding such as hardy plank.. Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm 58. will also cut fiber cement siding such as hardier plank. Country of origin China. Angle gauge allows for cuts up to 45 degrees.

Bonus installation Kit and double-sided honing stone included Designed to cut laminate, solid wood and engineered flooring up to 15mm 58. will also cut vinyl tile and fiber cement siding such as hardy plank.. Cuts up to 13 wide. Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm 58, vinyl tile, pressboard siding and fiber cement siding such as hardier plank. Angle gauge allows for cuts up to 45 degrees. Quiet, dust free operation, No electricity required.Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation Kit tapping block, Wedge SPACER, pull bar and double-sided honing stone.Ships to the US only.Professional level.

13 Cutting capacity. Sliding extension table supports longer boards 41 Working length. Cuts a variety of material, including laminate flooring, fiber cement board HardiePlank, cemplank , engineered wood and vinyl siding up to 13 wide and 1932 thick. 28-12 Handle for increased leverage. Bonus accessory Kit includes pull bar, tapping block, 16 PVC inserts and mallet 30 value. Adjustable measuring gauge for quick repetitive cut. Laser etched table miter gauge for angled cuts. Heavy duty 22 aluminum fence and reinforced table top for added strength and durability. Includes 13 high speed steel blade. Quiet and dust free.