Top 6 Best Liquid Level Sensors

Approvals CE, UL, CSA, FLORIDA DEP EQ682. Electrical Ratings 240 VAC, 0. 14A 120 VAC, 0. 28A 120 VDC, 0. 07A 24 VDC, 0. 28A. Stem Material PBT. Float Material PBT. Float SG 0. 75. Lead Wires 24, 22 AWG, Teflon Insulated. Max PressureTemp 100 PSI266F 130C. Mounting 12 x 12 NPT. Switch Rating 30 Watt, SPST. Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current Amperes resistive at different voltages, PBT is not suitable for use in water above 149F 65C. Wires are rated for 60C where exposed to oil.

Package Content 6 x Water Level Sensor Color White and yellow. Model No. DP3500 Max Contact Rating 10W. Max Switching Current 0.5AMax Breakdown Voltage 220V DCMax Carry Current 1.0AMax Contact Resistance 100m ohm. Temperature Rating -10 85 CelsuisFloat Ball Material P.PFloat Body Material P.P. Cable Length 38cm 15Switch Body Size 45 x 17mm 1.8 x0.7 Thread DiaApprox 13mm 0.5.

Contact WaterLiquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications.. The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability.. This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function.. The sensor has a DIP switch. The DIP switch controls the output voltage high level of the signal terminal green line. When the DIP switch is dialed to 5V, the high level is 5V. When the DIP switch is dialed At 3V, the high level is 3.3V.. Compatible with Arduino motherboard and Raspberry Pi motherboard. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc..

Product Name Water Level SensorModel No. ZP4510Max Contact Rating Max Contact Rating10W 10W. Max Switching Voltage 220V DCACMax Switching Current 1.5AMax Breakdown Voltage 300V DCACMax Carry Current 3A. Max Contact Resistance 100m ohmTemperature Rating -10 85 CelsuisFloat Ball Material P.PFloat Body Material P.P. Thread DiaApprox 9.5mm 0.374Switch Body Size 23.3 x 57.7mm 0.9 x 2.27Max DHCable Length 36cm 14.2. Color WhiteNet Weight 70gPackage Content 5 x Water Level Sensor.

Approvals CE, UL, CSA, NSF. Electrical Ratings 240 VAC, 0. 14A 120 VAC, 0. 28A 120 VDC, 0. 07A 24 VDC, 0. 28A. Stem Material Polypropylene. Float Material Polypropylene. Float SG 0. 80. Lead Wires 24, 22 AWG, MTW Insulated. Max Pressure 100 PSI221F 105C. Mounting 18 NPT. Switch Rating 30 Watt, SPST. Note Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current Amperes resistive at different voltages.

Approvals CE, UL Haz. Loc. , CSA Haz. Loc. , NSF. Electrical Ratings 240 VAC, 0. 14A 120 VAC, 0. 28A 120 VDC, 0. 07A 24 VDC, 0. 28A. Stem Material 316 Stainless Steel. Float Material 316 Stainless Steel. Float SG 0. 60. Lead Wires 24, 22 AWG, Teflon Insulated. Max PressureTemp 300 PSI392F 200C. Mounting 12 x 12 NPT. Switch Rating 30 Watt, SPST. Note Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current Amperes resistive at different voltages, Minimum through hole size for mounting is 0. 69.

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.. The liquid level sensor probe is installed above and below the outer wall of the container to be tested the high and low positions of the liquid level. The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.. The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.. The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.. High and low level output If there is induction, the output is high level no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.

Auburn WCC-1138L Liquid Level Sensor CS 14450. Alumina Insulation. Hex 1316. Thread 38-18 PTF Short. Probe Internal Thread 10-24 NC - 2 THD.

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.. The liquid level sensor probe is installed above and below the outer wall of the container to be tested the high and low positions of the liquid level. The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.. The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.. The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.. NPN output If there is induction, the output is low level no induction, disconnected.

Approvals CE, UL, CSA, NSF. Electrical Ratings 240 VAC, 0. 14A 120 VAC, 0. 28A 120 VDC, 0. 07A 24 VDC, 0. 28A. Stem Material Polypropylene. Float Material Polypropylene. Float SG 0. 50. Lead Wires 24, 22 AWG, MTW Insulated. Max PressureTemp 100 PSI221F 105C. Mounting 12 NPT. Switch Rating 30 Watt, SPST. Note Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current Amperes resistive at different voltages.