Top 6 Best Marine Bottom Paint

ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection copper biocide keeps barnacles and mussels from clinging to hull bottoms ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions. EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat best for boats used frequently durable finish withstands trailering beaching better than traditional ablative paints. FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season. EASY TO APPLY Use a natural bristle brush, or a 316 nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING 10 brushroller - TotalBoat Special Brushing Thinner 100 spray equipment - TotalBoat Spray Thinner 101. AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage 500 sq ft per gallon this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only it is not intended for household use.

ANTIFOULING PAINT FOR BOATS Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season ideal for fiberglass, wood and steel boats in salt water and fresh water. ABLATIVE BOTTOM PAINT Self-polishing coating wears away gradually as the boat moves through the water minimizes bottom paint build up so you have less sanding to do next season durable finish can be burnished for smoothness, speed fuel efficiency. LOW ODOR, LOW VOCs, EASY CLEANUP This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water ideal for use in marinas and boat yards with environmental restrictions no maximum dry time before launch. EASY TO APPLY BY BRUSH, ROLLER OR SPRAY Brush - natural bristle Roller - 316 nap or foam solvent-safe cover Spray - airless or conventional if needed, thin with water, up to 10 apply 1-2 thin coats no sanding needed between coats. AVAILABLE IN BLACK, BLUE, GREEN RED COLORS in Quart and Gallon sizes Coverage 500 sq. ft. per gallon. Compatible with most previously applied bottom paints Apply over existing ablative or hard bottom paints for use on boat bottoms hulls below waterline only.

Optimizes the benefits of hard and ablative paints through a unique Dual Resin approach. Coating prevents premature wear-through yet a slow polishing action minimizes unnecessary paint build-up. Surface continuously smoothes with use, providing a fast, fuel efficient coating. Cost effective choice for all power and sail boats and in all waters. Paint Color Black. Flash point 27.0 degrees_celsius.

Optimizes the benefits of hard and ablative paints through a unique Dual Resin approach. Coating prevents premature wear-through yet a slow polishing action minimizes unnecessary paint build-up. Surface continuously smoothes with use, providing a fast, fuel efficient coating. Cost effective choice for all power and sail boats and in all waters. Paint Color Black.

Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline. Formulated to slowly release copper in order to prevent fouling. Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq ft. Protective coating resists buildup of barnacles, algae and other marine growth. Hard, smooth finish provides a flat sheen over most aged antifouling coatings. For use in mild to moderate fouling conditions. Suitable for both fresh and saltwater. Best for boats that are regularly hauled and cleaned. Use on fiberglass boats and all non-aluminum trailer boats. This item is not for sale in Catalina Island.

Optimizes the benefits of hard and ablative paints through a unique Dual Resin approach. Coating prevents premature wear-through yet a slow polishing action minimizes unnecessary paint build-up. Surface continuously smoothes with use, providing a fast, fuel efficient coating. Cost effective choice for all power and sail boats and in all waters. Paint Color Blue.

DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention. EASY TO APPLY 1-Part formula provides professional results with just a brush and roller roll tip method can also be applied by spraying for use above the waterline. SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean will not fade, crack, or peel easy to touch up ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim. VERSATILE TOPSIDE PAINT Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces not for continuous submersion on boat bottoms that remain in the water longer than 72 hours. CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts Gallons. Coverage 350-400 sq. ft.gal. White, Black Gray also available in flat finish. Primer TotalBoat Topside Primer or TotalProtect metals.

Optimizes the benefits of hard and ablative paints through a unique Dual Resin approach. Coating prevents premature wear-through yet a slow polishing action minimizes unnecessary paint build-up. Surface continuously smoothes with use, providing a fast, fuel efficient coating. Cost effective choice for all power and sail boats and in all waters. Paint Color Blue.

Water-based ablative antifouling for use in salt, brackish and fresh water. Wears away with use, minimizing build-up and the need for heavy sanding. Very easy to apply. Size 1 Gallon. Product Color Black.

HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae slime in fresh water, salt water, and brackish water. COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs copper-free paint also means colors are much brighter than bottom paint that contains copper biocide. FOR USE ON FIBERGLASS, WOOD, STEEL, IRON ALUMINUM BOATS below the waterline only haul and relaunch without losing the effectiveness of the biocide. EASY TO APPLY For brushing, use a high-quality, natural bristle brush for rolling, use a 316 nap or foam solvent-safe roller cover if needed, thin with TotalBoat Special Brushing Thinner 100 brushingrolling or TotalBoat Spray Thinner 101 spraying. AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS Blue Quart Gallon, Black Quart Gallon, White Quart Gallon, Green Gallon only, and Red Gallon only Coverage 500 sq. ft. per gallon after applying, theres no maximum dry time before launch.