Top 6 Best Master Tap And Die Set

Thread chaser set includes UNCsilver 58-11, 916-12, 12-13, 716-14, 38-16, 516-18, 14-20 UNFblack 58-18, 916-18, 12-20, 716-20, 38-24, 516-24, 14-28 Metricgold M141.5, M121.75, M121.5, M121.25, M111.5, M101.5, M101.25, M101.0, M81.25, M61.0. This thread repair kit is specially designed to chase worn and damaged threads and clean stubborn dirt and corrosion without shaving off metal.. This master thread chaser kit is a must-have for any auto mechanic to chase threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and other vehicle bodies.. The thread chaser set is made of high-quality carbon steel, providing strength and maximum durability. The dies and taps are hex-shaped, making them compatible with a wrench or socket.. This master thread chaser set comes with a storage case that keeps everything organized. The taps and dies are color-coded for easy identification, making it easy to differentiate between coarse, fine, metric, and SAE chasers and dies at a glance..

Metric taps dies sizes M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1.0, M71.0, M8x1.25, M9x1.0, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75.. SAE taps dies sizes 4-40 NC, 6-32 NC, 8-32 NC, 10-32 NF, 10-24 NC, 12-24 NC, 14-20 NC, 14-28 NF, 516-18 NC, 516-24 NF, 38-16 NC, 38-24 NF, 716-14 NC, 716-20 NF, 12-13 NC, 12-20 NF, 18-28 BSP, 18-27 NPT.. Set includes tap wrench, T-handle tap wrench2 piece, die wrench, screwdriver, thread pitch gaugeSAE Metric. Suit for efficient clean cutting of internal and external threads.. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction..

Taps dies sizes 14-20 NC, 14-28 NF, 516-18 NC, 516-24 NF, 38-16 NC, 38-24 NF, 716-14 NC, 716-20 NF, 12-13 NC, 12-20 NF, 916-12 NC, 916-18 NF, 58-11 NC, 58-18 NF, 34-10 NC, 34-16 NF, 78-9 NC, 78-14 NF, 1-8 NC, 1-14 NF.. Set includes T-handle tap wrench, tap wrench, die wrench with1-12'' odadapter, flat screwdriver, centre punch and spiral flute extractors3mm to 18mm. Suit for efficient clean cutting of internal and external threads.. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction..

Ratcheting T handles wind Dies with a 5 swing arc and have a reversing lever to eliminate hand over hand turning. Twist lock guide system reduces the walk back of the die guide and keeps the dies centered while cutting. Ratcheting t wrench works with GEARWRENCH pass thru socket system. Die adapters work with the 38inch Drive pass thru ratchet and socket system as well as socket accessories. Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 34 and 3mm to 18mm. Drive extension adapters provide greater access in confined areas when used with 38inch Drive Extensions.

PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses. EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance. VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel Taps for internal threads and Dies for external threads feature with tapered teeth that start threading more easily. MOST POPULAR SIZES - Set includes 20 Metric taps and dies M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75 20 SAE Fractional taps and dies for coarse thread UNC 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 14-20 NC, 516-18 NC, 38-16 NC, 716-14 NC, 12-13 NC 12 SAE Fractional taps and dies for fine thread UNF 10-32 NF, 14-28 NF, 516-24 NF, 38-24 NF, 716-20 NF, 12-20 NF 2 NPT tap and die 18-27 NPT. COMPREHENSIVE ACCESSORIES - Comes with 1 Adjustable Tap Handle 1 T-type Small Tap Handle 1 Adjustable Die Handle 2 Thread Pitch Gauges 1 Slotted Screwdriver 1 Storage and Carry Case.

Tap and Die Bit Diversity These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it.. Wrenches All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market.. Construction Material Steel is the base metal used in the construction of these sets but not all steel is created equally Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer.. MetricSAE The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes so use inches instead of millimeters. This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, its probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you dont have t. Metal Storage Case More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..

Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Constructed of high carbon steel for durability. Puts commonly needed taps, dies, drill bits, and extractors at your fingertips. Perfect set for the professional craftsman. Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.

Contains SAE Self-Aligning Taps, Metric Self-Aligning Taps, SAE Self-Aligning Dies, Metric Self-Aligning Dies and Drive Tool System. All Taps and Dies are constructed of High Carbon Steel. Laser Etched Markings for easy identification. Die lock ergonomic die handle that also accepts two different adjustable tap sockets. Comes with Drill pits for use with taps.

Combines inch and metric sizes in 1 convenient kit. Set includes 7 drive tools with accessories, 17 inch plug taps, 17 inch hex dies, 17 metric plug taps, 17 metric hex dies sturdy storage case with handle. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy. Hex-shaped dies permit use of sockets and wrenches as well as die stocks. Rust-resistant satin finish for smooth cuts with less friction.

This tap and die set is great for auto repair and machinery. High-carbon steel taps and dies provide durability. Machine screws 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF and 12 - 24 NC. Fractional 14 - 20 NC, 14 - 28 NF, 516 - 18 NC, 516 - 24 NF, 38 - 16 NC, 38 - 24 NF, 716 - 14 NC, 716 - 20 NF, 12 - 13 NC and 12 20 NF. Metric 58 hexagon 3mm - 0.5, 4mm - 0.7, 4mm - 0.75, 5mm - 0.8, 5mm - 0.9 and 6mm - 1.0. This tap and die set is great for auto repair and machinery. High-carbon steel taps and dies provide durability. Machine screws 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF and 12 - 24 NC. Fractional 14 - 20 NC, 14 - 28 NF, 516 - 18 NC, 516 - 24 NF, 38 - 16 NC, 38 - 24 NF, 716 - 14 NC, 716 - 20 NF, 12 - 13 NC and 12 20 NF. Metric 58 hexagon 3mm - 0.5, 4mm - 0.7, 4mm - 0.75, 5mm - 0.8, 5mm - 0.9 and 6mm - 1.0.

ALL-IN-ONE TAP DIE SET This 80-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the 34 most needed standard and metric sizes, from 4 14125 to 12 inch and from M3 to M12. USER-FRIENDLY DESIGN This tap and die set is engineered to tight tolerances to meet professional needs the tap ends are 15 to 25 inch long for easy use with the provided standard and metric wrenches. CHROMIUM STEEL The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity. ADDITIONAL TOOLS In addition to the 68 taps and dies, this tool set includes protective gloves, both long and T-handle wrenches, 18 flathead screwdrivers, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more. BLOW-MOLDED CASES Separate sturdy storage cases store and organize the SAE and metric taps and dies, providing easy organization and portability wherever you need them.

Full polish SAE and metric 14, 38 and 12 drive 6 point standard sockets.. 84 tooth full polish chrome teardrop ratchets offer a 4.3 swing arc and flush mounted onoff lever for greater access in tight spaces.. Combination wrenches feature a 15 offset box end for added knuckle clearance..

Thread ground high speed steel. Right hand. Supplied with solid wooden case. Includes one of each of 18-27, 14-18, 38-18, 12-14, 34-14 and 1-11-12 NPT tap and dies.