Top 6 Best Nano Vna

Upgraded Version Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier. 3GHz vector network analyzer, designed in collaboration with OwOComm. Under the LGPL license agreement, it is completely manufactured according to the v2_2 files issued by OwOComm at Development Department, in line with the original technical specificationsplease refer to below path to get the firmware updated drive. google .comdrivefolders1Lr7AOTg2pAhYBZDfaiPVZTMZkFO14PMj. The SAA-2NNanoVNA_V2.2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the SAA-2NNanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device. Transmission Mearsure S21 70dB50KHz-1.5GHz, 60dB1.5GHz-3GHz. Reflection Measure S11 -50dB50KHz-1.5GHz, -40dB1.5GHz-3GHz Antenna Analyzer 1.00550KHz - 1.5GHz, 1.021.5GHz-3GHz Flip Display, you can flip the display for your convenience usage. NOTE The new batch of SAA2N analyzers have been upgraded to the laser labeling on the control dashboard, so you might find it difficult to read at the first sight, the former labeling is easy to fade after long-time usage, and we are still working on it. PC Connection the device can be controlled by PC via VNA-QT software,supported for Linux, Windows 7, Mac OS planned. It also support Nanovna-Saver for extracting the data for display on a computer, and for saving to Touchstore files.

Large Screen 3G NanoVNA-F V2 with 4.3-inch IPS LCD display,ultra-wide viewing angle,long-term use does not hurt your eyesFull touching screen design, with 3 side buttons at the same time, flexible and convenient operation.. Measurement Frequency Wide Application The measurement range of 3G NanoVNA-F is extended to 50k-3GHz,the dynamic range is improved, reach to 80db. Can be used to debug the duplexer, more accurate, and simple.Which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.. Standby Time IncreaseBuilt-in 5000mAh lithium battery, standby time up to 7 hours, Using high current 2A charging IC to Shorten charging time, and extended 5V1A USB output interface. It can be used as a Mobile Power Pack to charge mobile phones when not in use.. Metal Shield The RF front end is designed with a metal shield to make the S21 dynamic range better than 80dB over the entire frequency range. Sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy.The radio frequency interface is SMA, which is convenient for connecting various tested parts.Support Chinese and English interfaceSupport screen brightness adjustmentSupport host computer, you can use computer as display operation interface.. Package List1 4.3inch 3G NanoVNA-F V2 Host1 SMA Open Calibration Kit1 SMA Short-circuit Calibration Kit1 SMA 50 Load Calibration Kit1 SMA-KK Double-Head Female Hole Adapter1 SMA-JJ Double-Head Male Pin Adapter1 SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter2 200mm SMA-JJ RG405 RF Cable1 USB Type-C Cable1 White Touchscreen Pen.

Unit is designed to fit for Original Equipment, form and function Simple and practical PC control software, you can export Touchstone snp files for various radio design and simulation software through PC software.. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.. Requirements accomplished by leveraging Spectra Premium's OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change.Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.. This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring..

This is a DIY product that provides perfect vector network measurement capabilitiesno enclosure. The metal shield no enclosurefor tiny vector network analyzer is designed to reduce the external interference and improve the measurement accuracy. Designed a practical and simple control application on PC, you can download touchstoneSNP files for radio design and simulation software. Added a case, which is protective and dust-proof. Disply 2.8 inch TFT 320 x240. The default firmware of AURSINC Nanovna main function is used for antenna performance measurement. The TXRX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. firmware and hardware repository at github.comttrftechNanoVNAPackage include NanoVNA host with batterywithout case x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.

The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.. We add Sma to Bnc connector for testing Bnc connector. We add one uhf antenna and one vhf antenna for comparing..

NEW UPGRADE FNCTION Own our Seesii 3GHz Vector Network Analyzer,you can test the standing wave impedance of the antenna, you can also debug the duplexer, the insertion loss of the filter, the isolation, the standing wave, you can also test the attenuation of the cable, shorten the coefficient, the phase, you can also test the amplification of the antenna amplifier. POWERFUL FREQUENCY METER The improved frequency measurement can measure the antenna frequency of 2.4G up to to 3G. 70dB50KHz-1.5GHz, 60dB1.5GHz-3GHz. Reflection Measure S11 50dB50KHz-1.5GHz, 40dB1.5GHz-3GHz Antenna Analyzer 1.00550KHz - 1.5GHz, 1.021.5GHz-3GHz. IMPROVED ACCURACY NanoVNA SAA-V2 Vector Antenna analyzer equipped with the upgraded shell,Strong anti-interference, improve accuracy.with 3.2 inch touch screen and touchscreen pen,make more accurate and easy to operate.. POWERFUL SECURE POWER SUPPLY This SAA-V2 is battery powered or USB powered Built in 2000mA-h battery, could work for about 3 hours continuously, if need extra working time, it can be connected to power bank or power source.. COMPATIBLE The 3GHz second-generation NanoVNA vector network analyzer is based on OwOComm's S-A-A-2 design, and its performance is greatly upgraded.Can be control by PC,computer software compatible with Linux, Windows 7.

Upgraded Becaues the difference of the technical architecture,though S-A-A-2NanoVNA -V2 uses a similar user interface to the NanoVNA, , the S-A-A-2NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change.. Improved SAA-V2 vector network analyzer has been improved to 3G Transmission Mearsure S21 70dB50KHz-1.5GHz, 60dB1.5GHz-3GHz. Reflection Measure S11 50dB50KHz-1.5GHz, 40dB1.5GHz-3GHz Antenna Analyzer 1.00550KHz - 1.5GHz, 1.021.5GHz-3GHz. Scanning Performance The scanning speed is 100 pointssecond, the maximum scanning point of the device screen is 201, the maximum scanning point of USB is 1024. Can Work 6 hours, with an efficient endurance.. Multifunction TXRX method can measure the complete S11 and S21 parameters. The default firmware main function is used for antenna performance measurement.. Software compatibility SAA-V2 NANOVNA supports Nanovna-Saver for extracting the data for displaying on a computer, and for saving to Touchstore files. It can be controlled by PC via VNA-QT software,supported for Linux, Windows 7, Mac OS planned..

Upgraded NanoVNA SAA-2N V2.2 VersionNot only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test. Calibration The SAA-2NNanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data previously saved data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.. Improved Frequency Rangetransmission Mearsure S21 70dB50KHz-1.5GHz, 60dB1.5GHz-3GHz. Reflection Measure S11 -50dB50KHz-1.5GHz, -40dB1.5GHz-3GHz Antenna Analyzer 1.00550KHz - 1.5GHz, 1.021.5GHz-3GHz. Improved PerformanceHigh stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered. What You Can Get1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services.