Top 6 Best Neewer Slider Motorized

Complete Functions 2.4G Wireless remote Control, this camera slider automatically goes back and forth by setting the start point and end point. Supports video shooting to move at a constant speed and time-lapse shooting with adjustable exposure time, shooting time, interval, number of shots, and delay. The maximum load capacity is 11lb5kg when shooting horizontally when the slider is tilted at 45, the maximum load capacity becomes 5.5lb2.5kg. Ultra-Silent Stepper Motor Driver Power Options Featuring a unique silent stepper motor driver, the camera slider combines ultra-precision positioning with ultra-silent operation. Two rechargeable 2600mAh NP-F550 lithium-ion replacement batteries and a USB battery charger are included to power the remote control and motor. Or Use a USB power bank with 5V 2A output, Not included as the power source to power them. Supports Multiple Shooting Modes Adjust the black knobs on both sides of the camera slider to capture horizontal, tracking, and 120 panoramic shots and achieve multi-angle shooting effects. Adjust one knob to upper left and the other to lower right for tracking shots, set one knob to lower left and the other to upper right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. Lightweight Balanced Design Made of carbon fiber and aluminum alloy, the camera slider is lightweight and easy to carry for outdoor photography and videography. 4 roller bearings with balanced operation are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 14 and 38 threaded holes for mounting on a tripod. Camera Slider Kit This kit includes a motorized camera slider, a 2.4G Wireless remote control, Two NP-F550 replacement batteries, a USB battery charger, a ball head, a hex key, a screw, and six shutter release cables C1, C3, N1, N3, S1, S2. Compatible with most camcorders and miniature cameras, such as Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras. Other camera models require an additional shutter release cable not included.

Complete Functions 2.4G Wireless remote Control, this camera slider automatically goes back and forth by setting the start point and end point. Supports video shooting to move at a constant speed and time-lapse shooting with adjustable exposure time, shooting time, interval, number of shots, and delay. The maximum load capacity is 11lb5kg when shooting horizontally when the slider is tilted at 45, the maximum load capacity becomes 5.5lb2.5kg. Ultra-Silent Stepper Motor Driver Power Options Featuring a unique silent stepper motor driver, the camera slider combines ultra-precision positioning with ultra-silent operation. Two rechargeable 2600mAh NP-F550 lithium-ion replacement batteries and a USB battery charger are included to power the remote control and motor. Or Use a USB power bank with 5V 2A output, Not included as the power source to power them. Supports Multiple Shooting Modes Adjust the black knobs on both sides of the camera slider to capture horizontal, tracking, and 120 panoramic shots and achieve multi-angle shooting effects. Adjust one knob to upper left and the other to lower right for tracking shots, set one knob to lower left and the other to upper right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. Lightweight Balanced Design Made of carbon fiber and aluminum alloy, the camera slider is lightweight and easy to carry for outdoor photography and videography. 4 roller bearings with balanced operation are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 14 and 38 threaded holes for mounting on a tripod. Camera Slider Kit This kit includes a motorized camera slider, a 2.4G Wireless remote control, Two NP-F550 replacement batteries, a USB battery charger, a ball head, a hex key, a screw, and six shutter release cables C1, C3, N1, N3, S1, S2. Compatible with most camcorders and miniature cameras, such as Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras. Other camera models require an additional shutter release cable not included.

Complete Functions Controlled by the remote control, this camera slider automatically goes back and forth by setting the start point and end point. Supports video shooting to move at a constant speed and time-lapse shooting with adjustable exposure time, shooting time, interval, number of shots, and delay. The maximum load capacity is 11lb5kg when shooting horizontally when the slider is tilted at 45, the maximum load capacity becomes 5.5lb2.5kg. Ultra-Silent Stepper Motor Driver Power Options Featuring a unique silent stepper motor driver, the camera slider combines ultra-precision positioning with ultra-silent operation. A rechargeable 2600mAh NP-F550 lithium-ion replacement battery and a USB battery charger are included to power the remote control and motor. Or Use a USB power bank with 5V 2A output, Not included as the power source to power them. Supports Multiple Shooting Modes Adjust the black knobs on both sides of the camera slider to capture horizontal, tracking, and 120 panoramic shots and achieve multi-angle shooting effects. Adjust one knob to upper left and the other to lower right for tracking shots, set one knob to lower left and the other to upper right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. Lightweight Balanced Design Made of carbon fiber and aluminum alloy, the camera slider is lightweight and easy to carry for outdoor photography and videography. 4 roller bearings with balanced operation are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 14 and 38 threaded holes for mounting on a tripod. Camera Slider Kit This kit includes a motorized camera slider, a remote control, a RJ45 Data Cable, an NP-F550 replacement battery, a USB battery charger, a ball head, a hex key, a screw, and six shutter release cables C1, C3, N1, N3, S1, S2. Compatible with most camcorders and miniature cameras, such as Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras. Other camera models require an additional shutter release cable not included.

p WIRELESS 2.4G CONTROL Controlled by 2.4G Wireless Remote Control support Time lapse or Video Shot. Extremely simple to use and operate Note The camera and tripod ball head are NOT included in the package. p ULTRA SILENT STEP MOTOR DRIVING AND PRECISE Have a unique SILENT MUTE step motor driving technology which combines ultra precise step motor positioning ability with ultra silent operation. A rechargeable replacement F550 Li-ion battery and USB charger will be provided to supply power for the motor. LIGHTWEIGHT AND BALANCED DESIGN Made of carbon fiber and aluminum alloy, lightweight and convenient to carry outside for photography. Use 4 bearing-rollers-carrier with balance traction design, more stable and anti-shake, make sure to provide stable video and clear photography pictures. p SUPPORT MULTIPLE SHOOTING MODES Focusing shot and 120 degree wide angle shoot are available. It supports time-lapse shooting, video shooting and auto round trip shooting. You can make the rail slider pan track round trip automatically by your smartphone. You can automatically set the slip speed and picture numbers at time lapse shooting. p UNIVERSAL COMPATIBILITY The electric camera slider is compatible with most camcorder and micro-camera such as Canon, Nikon, Sony, Panasonic, Samsung and PENTAX camera 6 pieces Shutter Release Cables C1, C3, N1, N3, S1, S2 are included.

pRemote-Controlled Dolly Neewer Motorized Camera Dolly is a perfect tool for shooting time-lapse, low-angle, and panoramic videos. Use the wireless remote control to set speed levels 1.4cms, 2.4cms, 3cms, change directions, and startpause the dolly up to 19.7 6m away.Note there will be noisy during the operation of motorized dolly car when you are recording audio.. pAngle Adjustable Wheels Two wheels with 90 angle adjustment enable the dolly to move in circular or linear paths. The 14 to 38 reversible screw is compatible with almost every video head, ball head, and phone holder. The dolly also works with camera sliders for achieving zoom effects. pLightweight and Durable Made of high-quality aluminum alloy and ABS plastic, the dolly can support DSLR cameras, camcorders, and smartphones up to 6.6lb 3kg. Designed to fit in your palm, it is lightweight and conveniently portable for traveling filmmakers. pBuilt-In Rechargeable BatteryThe built-in 1800mAh Li-ion battery can offer up to 6 hours of run time. A provided Micro USB cable helps recharge the battery to 100 in 3 hours. p4 LED Indicators 4 LED indicators show charging status charging red, fully charged green, battery status low battery 3 indicators flash at the same time, and speed levels.

Complete Functions Controlled by the remote control, this camera slider automatically goes back and forth by setting the start point and end point. Supports video shooting to move at a constant speed and time-lapse shooting with adjustable exposure time, shooting time, interval, number of shots, and delay. The maximum load capacity is 11lb5kg when shooting horizontally when the slider is tilted at 45, the maximum load capacity becomes 5.5lb2.5kg. Ultra-Silent Stepper Motor Driver Power Options Featuring a unique silent stepper motor driver, the camera slider combines ultra-precision positioning with ultra-silent operation. A rechargeable 2600mAh NP-F550 lithium-ion replacement battery and a USB battery charger are included to power the remote control and motor. Or Use a USB power bank with 5V 2A output, Not included as the power source to power them. Supports Multiple Shooting Modes Adjust the black knobs on both sides of the camera slider to capture horizontal, tracking, and 120 panoramic shots and achieve multi-angle shooting effects. Adjust one knob to upper left and the other to lower right for tracking shots, set one knob to lower left and the other to upper right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. Lightweight Balanced Design Made of carbon fiber and aluminum alloy, the camera slider is lightweight and easy to carry for outdoor photography and videography. 4 roller bearings with balanced operation are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 14 and 38 threaded holes for mounting on a tripod. Camera Slider Kit This kit includes a motorized camera slider, a remote control, a RJ45 Data Cable, an NP-F550 replacement battery, a USB battery charger, a ball head, a hex key, a screw, and six shutter release cables C1, C3, N1, N3, S1, S2. Compatible with most camcorders and miniature cameras, such as Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras. Other camera models require an additional shutter release cable not included.

REMOTE CONTROL Upgraded motorized camera dolly with scale indication The wireless remote control can change speed direction make a pause, effective distance 6m19.7ft Support move to the opposite direction 3 speeds adjustable 1.4cms 2.4cms 3.0cmsNote there will be noisy during the operation of motorized dolly car when you are recording audio.. ADJUSTABLE WHEEL Wheel angle 180 degree adjustable, you can achieve creative Curvestraight line movement as well can achieve pitch shooting through ball head. LIGHTWEIGHT BUT DURABLE The Body is made of quality plastic material, can support up 3kg6.6lbs load. Pocket size and lightweight, only the size of the palm of your hand, easy to carry. 14 inch to 38 inch convertible screw is suitable for most camerasmartphone holder. BUILT-IN BATTERY Built-in 1800mAh rechargeable li-ion battery can offer up to 6 hours service time USB charging port and charging cable are available to provide more runtime. LIGHT INDICATORS 4 light indicators showing charging status red-charging green-fully charged, battery power status low power when 3 indicators flashing and speed it is in speed position when indicators normal on.

Versatile Smooth Camera SliderThis 47.2120cm long remote camera slider automatically moves your camera back and forth for professional video shooting. The maximum load capacity is 11lb5kg when placed horizontally and 5.5lb2.5kg when tilted up 45. Smart Two Way ControlThe slider supports both App control download the NEEWER app and 2.4G upgraded RT-08 remote control included. Designed with manual mode, video mode with constant speed, slow startstop, and time lapse, the slider automatically moves your camera back and forth from a preset start point to an end point. Better control camera motion by changing slider settings including frames, video length, interval, shutter speed App, exposure time remote. Powerful yet Silent MotorThe ER1-120 slider is powered by an upgraded powerful motor, providing smooth and silent camera movement for video production without worrying about buzzing background noise. Use the included 2600mAh NP-F550 lithium ion battery and USB charger, or the 5V 2A type C power jack to connect to a portable charger to power the motor and start filming for hours on end. Multiple Shooting AnglesFeaturing adjustment knobs on both sides of the slider to achieve different shooting angles, adjust one knob to lower left and the other to upper right for tracking shots, set one knob to upper left and the other to lower right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. The slider can also be placed at a 45 tilt angle or 90 vertically. Sturdy yet Lightweight BuildThe carbon fiber build guarantees sturdy and stable structure while making the slider lightweight for outdoor photography. The featured 4 roller bearings provides extra balance and anti shake effects. With 14 and 38 threaded holes at the bottom and on sides, the slider can easily mount on a tripod.

Versatile Smooth Camera SliderThis 39.4100cm long remote camera slider automatically moves your camera back and forth for professional video shooting. The maximum load capacity is 11lb5kg when placed horizontally and 5.5lb2.5kg when tilted up 45. Smart Two Way ControlThe slider supports both App control download the NEEWER app and 2.4G upgraded RT-08 remote control not included. Designed with manual mode, video mode with constant speed, slow startstop, and time lapse, the slider automatically moves your camera back and forth from a preset start point to an end point. Better control camera motion by changing slider settings including frames, video length, interval, shutter speed App, exposure time remote. Powerful yet Silent MotorThe ER1-100 camera slider uses a unique silent stepper motor driver that combines ultra precise positioning with ultra silent operation to provide smooth and noiseless camera movement for video production. Use the included 2600mAh NP-F550 lithium ion battery and USB charger, or the 5V 2A type C power jack to connect to a portable charger to power the motor and start filming for hours on end. Multiple Shooting AnglesFeaturing adjustment knobs on both sides of the slider to achieve different shooting angles, adjust one knob to lower left and the other to upper right for tracking shots, set one knob to upper left and the other to lower right for 120 panoramas, and resume both knobs to their middle positions for horizontal shots. The slider can also be placed at a 45 tilt angle or 90 vertically. Sturdy yet Lightweight BuildThe carbon fiber build guarantees sturdy and stable structure while making the slider lightweight for outdoor photography. The featured 4 roller bearings provides extra balance and anti shake effects. With 14 and 38 threaded holes at the bottom and on sides, the slider can easily mount on a tripod.

SOLID BUT LIGHTWEIGHT CONSTRUCTION The camera slider is made of high-strength carbon fiber rails and stainless steel flywheel, sturdy, lightweight and not easily deformed to achieve the perfect slide with precise control over movement Comes with a quality storage bag for convenient carry and transport. FLYWHEEL COUNTERWEIGHT DESIGN The flywheel counterweight and belt-driven pulley system provides more consistent and smoother slides compared to a standard slider. The addition of the handle gives you a different way to operate the slider with a crank for full control over your camera movements. 6 SMOOTH BEARING ROLLERS With the increased surface area of the rollers, the weight is distributed evenly, noise and wearing against the track is greatly reduced from the sliding motion. EASY USE The slider carriage features a 38-inch mount for attaching your tripod head There are also multiple 14-inch and 38-inch mounts along the bottom of the slider so you can attach QR plates, or you can attach it directly to your tripod. FULLY ADJUSTABLE LEGS When shooting on uneven surfaces, you can adjust the height and angle on each leg individually for the smoothest shot possible.