Top 6 Best Negative Rake Carbide Cutters

Authentic Easy Wood Tools 100 manufactured in the USA by the leader in carbide insert wood turning technology. Negative rake cutters work well on man-made acrylics, hard exotics and end grain producing a better finish, with less grabs and better edge life. Complete set of 3 Authentic Patented EWT replacement negative rake carbide cutters designed for Easy Start, Mini and Mid size Roughers, Finishers and Detailers Ci3-NR, Ci2-R2-NR and Ci4-NR, comes with replacement 8-32 screws.

Authentic Easy Wood Tools Ci0-NR Patented Negative Rake Carbide Replacement Cutter - fits Easy Wood Tools Full and Pro-Size Finishers. Virtually Eliminates catches and chipping while turning expensive Resins, Acrylics and extreme hardwoods. Leaves Ultra-Smooth finish LESS SANDING. Easy Wood Tools was the first company to offer this game changing design for turning Resins, Acrylics and Extreme Hardwoods. Just like our Standard Cutters when one side of the cutter gets dull, simply turn it to a new side and continue turning. When all sides are used, you just replace the cutter. You'll devote more time to turning instead of wasting hours sharpening your tools, and you'll save money in the long run, too.. Designed and Manufactured 100 in the USA.

Standard Size-15mmlengthX15mmwidthX2.5mmthickness square with 4 edges,30 degree cutting angle. Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness. 5 pieces per box,packed with a plastic container for safe and easy storage. Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side. Carbide cutter Corners are very sharp with virtually no radius Best choice for turning profiles and nearly 90 inside corners.

The VINWOX Negative Rake Carbide Turning Tools are manufactured with ease of use in mind. It Reduces catches and snags, is ideal for wood turners of all skill levels. Negative tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with Negative Rake Carbide Turning tools for man made resins, acrylics and extreme hardwoods now. 38 Straight Square Steel Shank. Including two sets Replaceable Carbide Tip. One set Carbide Tip installed on chisel and one Free set Replacement Carbide tip in the box. Square Rougher 11.1x11.1x1.75mm 4 sided Square 2 Radius Negative Rake Carbide Tip. Round Finisher 38 Diameter Round Negative Rake Carbide Tip. 1234 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life. Top quality and Long cutting life Guaranteed.

Authentic Easy Wood Tools Ci3-NR - Round Patented Negative Rake Carbide Cutter designed to only fit Easy Start Finishers, Mini Mid-Size Easy Finishers and Easy Hollowers both the Full and Pro size. Authentic Easy Wood Tools Ci3-NR Negative Rake Replaceable Carbide Cutter is designed specifically for turning difficult to turn resins, acrylics and extreme hardwoods - comes with new mounting screw. Try resin or acrylic with confidence--our Patented Negative Rake Carbide Cutters patent pending are a game changer They create smooth, safe, continuous cuts and make turning man made materials and super hard woods safer and easier...smoother finishes equals less sanding. Smoother finishes equals less sanding too. Designed and Manufactured 100 in the USA.

It very Perfect for finishing curved, concave surfaces, and general woodturning applications. Size 16mm0.63 Diameter, 3.0mm Thickness, 30 Cutting Angle, with negative rake 35. Cutting smoothly, reducing scratches and tears during machining.. Excellent for wood Howllowing, The right geometry or cutting angle is ground to provide an edge the cuts cleanly and safely.. 10pcs in Plastic box, easy to transport and storage..

Authentic Easy Wood Tools Ci1-R2-NR Patented Negative Rake Carbide Cutter Designed to fit EWT Full and Pro Size Easy Wood Tools Roughers. Virtually eliminates catches and chipping on expensive man-made turning blanks. Designed specifically for turning resins, acrylics and extreme hardwoods.. Easy Wood Tools was the first company producing Negative Rake Carbide Cutters for ResinAcrylic and Hardwood turning and is considered a true GAME CHANGER. Just like our Standard Cutters when one side of the cutter gets dull, simply turn it to a new side and continue turning. When all sides are used, you just replace the cutter. You'll devote more time to turning instead of wasting hours sharpening your tools, and you'll save money in the long run, too.. Designed and Manufactured 100 in the USA.

Authentic Easy Wood Tools 100 manufactured in the USA by the leader in carbide insert wood turning technology. Negative rake cutters work well on man-made acrylics, hard exotics and end grain producing a better finish, with less grabs and better edge life. Complete set of 3 Authentic Patented EWT replacement carbide cutters designed for Full and Pro Size Roughers and Finishers and Micro Detailers Ci0-NR, Ci1-R2-NR and Ci7-NR, comes with replacement screws. Comes with additional storage container with 10 each 1 x 1 x 516 compartments to store and protect replacement cutters when not in use. Cutters have the perfect grade of carbide to achieve the best combination of sharpness and edge durability.. Optimal grinding produces the flattest and truest cutting surfaces. The right geometry or cutting angle is ground to produce an edge that cuts cleanly and safely..

Authentic Easy Wood Tools Ci5-NR Patented Negative Rake Round Carbide Cutters are designed to fit our Micro Easy Finisher, Mid Size Easy Hollowers as well as all three Mini-Easy Hollowers.. Easy Wood Tools Patented Negative Rake Cutters have virtually eliminated chips and catches whilst turning Resins, Acrylics and extreme Hardwoods.. Little to no chipping and catches equals smoother finishes which equals less sanding.. Designed and Manufactured 100 in the USA.

Authentic Easy Wood Tools Ci2-R2-NR Patented Negative Rake Carbide Cutter - Fits Easy Wood Tools Easy Start, Mini and Mid-Size Roughers. Designed specifically for turning man-made resins, acrylics and extreme hardwoods. It is a Game Changer for turning these materials. The EWT Patented Negative Rake Cutters have virtually eliminated catches and tear-out whilst turning expensive blanks. Also leaves ultra-smooth finish less sanding. Just like our Standard Cutters, when one side of the cutter gets dull, simply turn it to a new side and continue turning. When all sides are used, you just replace the cutter. You'll devote more time to turning instead of wasting hours sharpening your tools, and you'll save money in the long run, too.. Also works great for final passes on any type of wood...which equals less sanding. Designed and Manufactured 100 in the USA.