Top 6 Best Oscilloscope Accessories

UPGRADED VERSION OF DSO152 FNIRSI DSO153 is slightly more expensive than the previous DSO152, but it was equipped with higher functionalities. It is not only upgraded to 1MHz Bandwidth, 5MSs Sampling Rate, 500ns-20S time base range, but with the 10X prode comes with the package, voltages up to 400V can be measured. . 2 IN1 DDS SIGNAL GENERATORFNIRSI DSO153 is not only an digital oscilloscope, but it also has the functionality of signal generator combined. It could output and display 14 different waveforms including sine, square, triangle, full, half, noise, and DC,etc, and the maximum waveform output frequency is up to 10KHz. It can be used freely for both periodic analog signals and non periodic digital signals. . QUICK MEASUREMENTWith one-key AUTO setting of all parameters, it can quick measure waveform. Your working efficiency would be highly improved. Only need to long press the AUTO button, the baseline would be quickly calibrated. . FASHIONABLE DESIGNTesting tools need to be cooler than before. This is the concept we live up to when we designed our product.The FNIRSI DSO153 Oscilloscope is equipped with built-in 1000mAH battery. It could continually work for 4 hours after fully charged. You could use it indoor or outdoor without worrying that the battery is running out. . PortablelightweightThe size of this oscilloscope is 99x68.3x19.5mm, which makes it lightweight and easy to carry. No assembling process is needed because it is assembled completely..

The Fluke ScopeMeter 120B Series is a rugged oscilloscope for industrial electrical and electro-mechanical equipment troubleshooting and maintenance.. Two 5,000-count true-rms digital multimeters. Oscilloscope Bandwidth 20 MHz. Meter and Scope Recorder. Shielded test leads for oscilloscope, resistance and continuity measurements.

200 MHz4 channels 1 GSas 14 M memory depth 100,000 wfms waveform capture rate 7 inch display 800480 pixels SPO technology,1 Mpts FFT Serial bus triggering and decode Standard, supports IIC, SPI, UART, RS232, CAN, and LIN Support MSO USB AWG Bode Plot USB WIFI. 200 MHz bandwidth 4 channels. Compatible with several options not available for the 2 channel model SDS1202X-E - mixed signal analysis, arbitrary waveform generator software, WiFi control, USB Isolated AWG Module. Real-time sampling rate up to 1 GSas. Record length up to 14 Mpts, 1 Mpt FFT.

Package Weight 4.0 Kg. Standard Decoder Iic, Spi, UartRs232, Can, Lin. 16 Digital Channels Mso Four Channel Series Only, Option. Usb Awg ModuleFour Channel Series Only, Option.

HT30A 3M BNC to banana adapter cable, heavy duty auto test lead. Allowing the oscilloscope away form the car being tested or repaired and placed on the bench. HT30A It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.Full shield can effectively reduce the noise interference.. HT30A A special line for assisting automobile measurement instruments to test various types of signals. which also can cooperate with a 201 attenuator.. HT201 HT201 Attenuator designed for assisting automobile measurement. Passive attenuator with 201 attenuation, if input a 20V signal, it can output a 1V signal. Bandwidth 10MHz.. This oscilloscope accessories set suitable for auto measurement, it work better when used together, it meet your various demand of your oscilloscope test..

100 MHz bandwidth. Real-time sampling rate up to 1 GSas,Record length up to 14Mpts. Serial bus triggering and decoding Standard, supports protocols IIC, SPI, UART, CAN, LIN. Advanced measurements on full memory 14 Mpts. Large 7-inch TFT-LCD display with 800 480 resolution.

Large 7-inch TFT-LCD display with 800 480 resolution. 200Mhz, 4 channels, 1Gsause, 1Mpts fft. True measurement and math can use all 14 Mpts of memory. Intelligent trigger Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout Dropout, and Pattern. Low background noise and 500 V div to 10 V div voltage scales.

Universal Oscilloscope Probe 101 and 11 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz.. Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.. Fully-Shielded Welded BNC Connector, Small Signal Interference Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability.. 1 x BNC to double-headed alligator clip test line 1 x BNC to double-head test hook test line 1 x BNC to double-stack test line 1 x Double-headed BNC coaxial line.. Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..

Widely Used The attenuation rate is 10X100X, widely used in any brand of oscilloscope.. Maximum differential test voltage DCACPK-PK 70V 10X, 700V 100X. You can safely measure floating voltages up to 700V and have a bandwidth up to 100 MHz.. Easier and Safer Use High voltage differential probes sample high impedance isolation between input and output to protect person safety. Power supply USB DC 5V output, more portable while Oscilloscope has USB interface.. Versatile Kit All 6 pieces with three different connectors help to test various on different occasions, including 2 alligator clips, 2 hook clips and 2 pincer clips.. Applications Floating Measurements, Switch-Mode Power Supply SMPS, Motor Drive Design, Power Device Testing Evaluation, Power Converter Testing Design..

It can be used with oscilloscope, compatible with many kinds of oscilloscope.. Ergonomic design, can be arbitrary curved, highlight LED which is convenient to operate at night or in dark condition.. This signal probe can catch ignition waveforms of automobile easily, Directly measure on the ignition coil. Do not need to add extension cable.. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers, high accuracy of measurement.. NOTE to avoid injury keep the probe away from moving parts, such as the alternator drive belt and cooling fans to present electric shock do not use if the probes sensor plates insulation shows signs of damage..