Top 6 Best Pipe Tap And Die Set

Taps dies sizes 14-20 NC, 14-28 NF, 516-18 NC, 516-24 NF, 38-16 NC, 38-24 NF, 716-14 NC, 716-20 NF, 12-13 NC, 12-20 NF, 916-12 NC, 916-18 NF, 58-11 NC, 58-18 NF, 34-10 NC, 34-16 NF, 78-9 NC, 78-14 NF, 1-8 NC, 1-14 NF.. Set includes T-handle tap wrench, tap wrench, die wrench with1-12'' odadapter, flat screwdriver, centre punch and spiral flute extractors3mm to 18mm. Suit for efficient clean cutting of internal and external threads.. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction..

Metric taps dies sizes M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1.0, M71.0, M8x1.25, M9x1.0, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75.. SAE taps dies sizes 4-40 NC, 6-32 NC, 8-32 NC, 10-32 NF, 10-24 NC, 12-24 NC, 14-20 NC, 14-28 NF, 516-18 NC, 516-24 NF, 38-16 NC, 38-24 NF, 716-14 NC, 716-20 NF, 12-13 NC, 12-20 NF, 18-28 BSP, 18-27 NPT.. Set includes tap wrench, T-handle tap wrench2 piece, die wrench, screwdriver, thread pitch gaugeSAE Metric. Suit for efficient clean cutting of internal and external threads.. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction..

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Also called 'pipe taps', National Pipe Taper NPT taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.. Hex die is for dressing over bruised or rusty threads. No special holder is required for this type of die, any wrench large enough will suffice. Ideal for maintenance in the shop or field. 12 Piece Set comes with sizes 18, 14, 38, 12, 34 and 1.

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Also called 'pipe taps', National Pipe Taper NPT taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.. The thread tapers 34 of an inch per foot. All Pipe Taps furnished with a 2-12 to 3-12 thread chamfer..

Carbon steel pipe taps are designed to clean andor rethread to damage or block pipe threads.. Right-hand cutting tool has a clockwise cutting function.. NPT Pipe taps sizes includes14-18 NPT, 38-18 NPT, 12-14 NPT, 34-14NPT, 1-11.5NPT. Equipped with special storage box.. Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.. Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..

ULTIMATE PIPE THREADER SET Dependable, heavy-duty construction tools including die heads, ratchet assembly, ratchet handle, alloy dies, and a coordinating carrying case for organized use on job sites. DESIGNED FOR EASE OF OPERATION Makes threading pipe or conduit quick and effortless and uses individual die heads for each pipe size and manually operated ratchet. DUCTILE CAST IRON DIE HEADS Kit includes 12-in., 34-in., 1-in., 1-14-in., 1-12-in., and 2-in. sized die heads, and all of the sizes fit in the ratchet without any additional pieces. CONVENIENT CARRYING CASE Lightweight yet rugged carrying case accommodates all dies heads in the set to keep them organized and together and features labeled compartments for clear identification. 18-2 PIPE CAPACITY Works with any 12-R die heads with a 18-in. to 2-in. pipe capacity, all threader sets use the same 12-R dies in die head.

Thread ground high speed steel. Right hand. Supplied with solid wooden case. Includes one of each of 18-27, 14-18, 38-18, 12-14, 34-14 and 1-11-12 NPT tap and dies.

Durable materials Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel GCR15 pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting.. Tool Storage Box The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of 18 - 27 npt, 14 - 18 npt, 38 - 18 npt, 12 - 14 npt, 34 - 14 npt. Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set.. NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set.. Uncoated Tools for Versatile Use Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut..

High quality materials If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 18, 14, 38, 12, and 34 pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel GCR15 material, hardened to a higher hardness traditional 45 carbon steel hardness is 44 composite steel hardness is 61.. 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper NPT and British Standard Pipe Taper BSP and come in the following sizes 18 - 27 npt, 14 - 18 npt, 38 - 18 npt, 12 - 14 npt, and 34 - 14 npt.. Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts.. The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available.. Product Packaging Upgrade The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who works with pipes and fittings. Use them to create new threads or repair damaged threads quickly and efficiently..

Ratcheting T handles wind Dies with a 5 swing arc and have a reversing lever to eliminate hand over hand turning. Twist lock guide system reduces the walk back of the die guide and keeps the dies centered while cutting. Ratcheting t wrench works with GEARWRENCH pass thru socket system. Die adapters work with the 38inch Drive pass thru ratchet and socket system as well as socket accessories. Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 34 and 3mm to 18mm. Drive extension adapters provide greater access in confined areas when used with 38inch Drive Extensions.

Set Include 5 hinge plate heads 38, 12, 34, 1, 1-14. Comprehensive Ergonomic Design A long handle offers max torque while threading.. Durable and Sturdy Perfect tool for construction, pipeline and equipment installation industries to ensure project quality, accelerate work efficiency and reduce labor intensity. Its head is made of malleable cast iron, which is durable and wearproof for long time use.. Application With this ratchet threader set, you can easily put a clean thread on your pipes, simplify the threading work of galvanized pipe and iron pipe. It cannot be used for threading stainless steel pipe.. Package The product is with an ABS plastic blow-molded case can keep the tools organized, safe storage and easy to transport..

6 Piece Carbon Steel NPT Hex Die Set. Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Hex die is for dressing over bruised or rusty threads. No special holder is required for this type of die, any wrench large enough will suffice. Ideal for maintenance in the shop or field. Included Components 6 Piece Hex Pipe Dies.