Top 6 Best Point To Point Wireless Bridge Outdoor

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.. CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.. Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.. Point-to-point bridge easily helps you expand the network range to the second buildingbarn, shop, warehouses, garages, or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.. Support PoE power supply 50 meters power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMACA, CSMACD, TCPIP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID 2A6EJ-CPE450.

Two installation methods This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you.. 150 degree adjustment The rod of wireless bridge bracket mount can be adjusted up and down by 150. After you install the CPE, adjust the angle of the rod to receive signals of different strengths.. Firmness This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.. Waterproof The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. Its very suitable for outdoor use.. Wide application This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..

CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional. 100Mpbs digital display bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standardsFCC. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM. The FCC ID 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions1This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ.

What CPE120 isKuWFi CPE120 is an Outdoor Wireless WiFi Bridge router support 1KM Long Range WiFi Extender with LED display to configure the PTPTMP connection, AP Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTPPTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature -30-55 Storage Temp -40-70. Multiple operation mode, for different network environment Point to PointMulti-Point1-4 for Elevator Monitorsurveillance networks Connect an IP Surveillance Camera to internet bridge CPE120s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras networks DVR. Point to Point Connection for Wireless Coverage Multi-Mode wireless ethernet bridge with ethernet port and LED display Support Wireless AP, Repeater operation mode Support SSID broadcasting, Multi SSID up to 4 Support DHCP server WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge. Tips on product how to use Its LED Display can show operation modechannelsignal strength, its HC switch ctrl the MasterSlave units, no need to access into GUI, press reset 1s will automatic paired avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS. Customer ServiceFor 30 days after the date of purchase, return your undamaged KuWFi line of sight wifi bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.

Built in 9dBi 2x2 dual polarized directional MIMO antenna. Adjustable transmission Power from 0 to 27dBm500mW. Power Consumption 10.5 Watts Max, Note When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. System level optimizations for more than 5km long-range wireless transmission only for paired Point-to-Point or Point-to-MultiPoint transmission. TP Link Pharos tdma Time Division Multiple Access technology improves product Performance in throughput, Capacity and latency Performance. Centralized management system Pharos Control. AP client AP router AP client router WISP operation modes. Passive PoE adapter Suppots up to 60 meter 200 Feet Power over Ethernet deployment and allows the device to be reset remotely. Connectivity technology Wi-Fi Built In.

The EZ-Bridge-LT is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mbsec.. It complies with the 802.11g and n standards to insure interoperability.. The EZ-Bridge-LT creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.. Multiple EZ-Bridge-LT units can be connected in a mesh configuration to allow interconnecting more than two sites..

Wi-Fi 5 Device Capable of speeds up to 867 Mbps on 5 GHz, 3x faster than N300 bridges. No Trenching Simulate ethernet connections without the need of excessive cabling. PoE Enabled Allows for easy hassle-free deployment. High Powered 27 dBm high transmit power extends Wi-Fi building-to-building.

2 UNITS Ubiquiti NanoStation Loco M5 READY TO INSTALL, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.. Ubiquiti NanoStation LocoM5 features the CPE design that expanded the global Wireless ISP industry.. Ubiquiti versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.. Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.. NanoStation locom5 can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE..

CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.. 1000Mpbs digital display wireless bridge, transmissionreceiver automatic networking, support point-to-point, point-to-multipoint, transmissionreceiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 433Mbpss.. 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability. Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode DMPS and automatic power-saving transmission APSD, supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.. Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM.FCC ID 2A6EJ-CPE450.

What Is CPE 200 CPE200 wireless bridge is a 5.8G high-performance,high-speed outdoor long-distance wireless network bridge.The advantage is long transmission distance, strong penetrating ability, and strong anti-interference ability .Point-to-point and point-to-multipoint outdoor coverage and applications without having to layout network cables making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.. 5.8G Technology IP65 Level Waterproof Design5.8G frequency using a new generation of 11ac technology is better than 2.4 G traditional CPE. It makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. Wireless bridge IP65 dustproof and waterproof, lightning protection,and antifreeze,is very suitable for outdoor use.. 2-3KM Transmission DistanceThis wifi outdoor bridge built-in 12dBi directional antenna can significantly improve the transmission and reception performance of wireless signals,data rate max up to 900Mbps between the bridge,which supports 2-3KM long-distance wireless transmission.suitable for warehouses, garden,barns, shops, or garages next to your house.. Point to Point Connection for Wireless Transmission Multi-Mode wireless wifi bridge with ethernet port and LED display Support Wireless AP, Repeater operation mode Support SSID broadcasting, Multi SSID up to 4 Support DHCP server. It transmits via wireless WiFi, reducing the trouble of wiring cable.. Tips on Product How to UseFull information LED display, include host-client modeH or C,the number behind is the channel number, signal strengthP,a number will be displayed after the pairing is successful, IP addressA, port wifipower led, the F button can switch the LED display info, the S button can complete the setting, more clearly know the device status, more conducive to debugging and maintenance..