Top 6 Best Pulse Generators

PARAMETER --- working voltage range 3.3V-30V frequency range 1Hz-150kHz1Hz-15kHz output current 5-30mA frequency accuracy 2 in each range.. APPLICATION --- as square wave signal generator for experimental development as square wave signal generator for motor driver as adjustable pulse generator for MCU as adjustable pulse generator for PWM dimming, speed regulating, etc.. DISPLAY--- clear LCD displays frequency duty ratio value.. MODE --- 2 modes, normal mode accurate mode.. FEATURE --- with lock function PWM output, can set frequency duty cycle separately duty cycle upper and lower bounds adjustable support serial communication all data auto saved after setting..

Main chip N5555Input voltage DC5-15V Output amplitude 4.2V V-PP5v input to 11.4V V-PP12V input Output frequency 1Hz-50Hz, 50Hz-1KHz, 1KHz-10KHz, 10KHz-200KHz Four Optional.. There are 4 jumpers and 2 variable resistors on the module, users can adjust the output wave with these components, to get their ideal wave easily.. Output LED indicator, low-level LED light, high-level LED off, the frequency is low when the LED flashes.. Capacitive capacity determines the frequency range, the user can calculate the adjustment according to their own needs.. The output duty cycle can fine-tune. Duty cycle and frequency is not separately adjustable, adjusting the duty cycle will change the frequency..

1. It's 1-channel PWM output signals. The Adjustable Frequency Range from 1Hz to 150KHz.. 2. Shell Protection and Clear LCD high definition Display Display both Frequency and Duty Cycle in more clear status. High precision detection.. 3. Dual Work Mode. Support both Frequency Adjustment and Duty Cycle Adjustment. Support UART. Support enable output.. 4. Support power-down memory function no need to set the data after power-off. Knob supports lock function to avoid misoperation.. 5. Wider Application Square wave signal generator, generating square wave signal for experimental development, generating square wave signal that controls the motor driver, and generating adjustable pulses for MCU Dimmer Dimmer Speed governor, and so on..

Miniature Arc Pulse BoosterThis high voltage generator is a finished module of transformerbooster for small scientific production. High EfficiencyThe high voltage converter can output high voltage arc, small size and high efficiency. Widely ApplicationsThis high voltage pulse generator can be used for high voltage experiment, teaching, and product development. Working RangeThe input voltage of the arc generator is DC 3.6-6V and will output DC20KV high voltage. Application PrincipleTwo high voltage wires can light up paper, single high voltage wire can discharge to any metal quietly.

Wide operating voltage DC3.330VOutput Current8AMax. Note The signal generator can't reverse the positive and negative poles, otherwise it may be burnt. Two modes can be selected PWM mode adjusting frequency and duty cycle, Note The number of switches cannot be set in this mode. PULSE mode Set power-on delay and start-up time, the number of switching times is adjustable. Features LED brightness, motor speed, frequency, duty cycle all can be adjusted. All parameters will be automatically saved after the setting is completed and will not be lost when the power is turned off. Can directly drive loads LEDs, motors, solenoid valves and other loads can be directly driven. Pulse number, frequency, duty cycle, adjustable cycle delay. For more details, please read the user manual or ask us for help. Application It can control the turn-on and turn-off of the equipment, which can be used for switch fatigue tests. Power-off test to verify the reliability of the equipment. Used for PWM signal generator drive lampmotor solenoid valve square wave rectangular wave signal generator servo motorstepper motor electric jaw.

Parameter The input voltage is DC 6V to 12V and will output 1000kV high voltage. Input Current 2A5A related to voltage, Output Voltage About 500KV1000KV, Input Cable Length About 100mmred is positive.. Feature The module can output high voltage pulse current, small size and high efficiency.. Scope of Application This module is the finished module of transformer for small scientific production. It can be used for negative-ion generator, electronic instrument, and science experiment.. Advantage The peripheral circuit is simple, simply connect the switch and battery, and the discharge intensity is great.. Note The way to judge if a battery capacity is enough to output maximum power is to measure the battery voltage when producing arc. It the measured voltage is about 6V, then it can output maximum power. Recommended battery capacity is above 2000mA, or above 4000mA if possible..

Input Voltage 5V-15V DC. When power supply is 5V , the output current can be 15MA around. When 12V power supply, the output current can 35MA around. Input current 100MA. Output amplitude 4.2V V-PP to 11.4V V-PP. Different input voltage, the output amplitude will be different.

Country Of Origin China. Square Waves To 30 Mhz. Dual Channel. Sweep Burst Modulation Harmonics. Ch1 - Ch2 Waveform Combining. Built-In Frequency Counter.

NE555 DIP 50pcs.